IceCap K2-50 User manual

Warranty - One (1) year warranty on pump and skimmer body.
IceCap is not responsible for consequential damages arising from installation or use of this
product. IceCap warrants the pump to be free from defects in material and workmanship under
normal use and conditions for the warranty period from the date of purchase. CoralVue’s
liability under this warranty shall be limited to repairing or replacing at CoralVue’s discretion,
without charge. CoralVue will not be liable for any cost of removal, installation, transportation,
or any other charges which may arise in a warranty claim.
NOTE: This warranty is void if the product is damaged through abnormal operating conditions,
accident, abuse, misuse, unauthorized
alteration or repair. This warranty is non-
transferable. Consumable spare parts are not
applicable to the warranty.
Safety
- Never allow the skimmer pump to run dry.
- Do not insert/pull the power plug with wet hands.
- Only clean the skimmer with vinegar and water.
- When servicing the skimmer please remove the plug from the power socket rst.
- Must be used with intended power source only.
Please ll out the product
registration form online at:
coralvue.com/register
K2 -50
QUICK START GUIDE
PLEASE READ
BEFORE INSTALLING
Thank you for
purchasing the
IceCap K2
Protein Skimmer.
Helpful Tips
✪ Protein skimmers only work in saltwater. A steady specic gravity of 1.023-
1.025 is recommended.
✪ It is recommended that the sump water level stays stable at all times. The use
of dedicated bafes or auto top off unit allows for more stable ltration from
the protein skimmer.
✪ Never adjust a skimmer after servicing the aquarium or feeding.
✪ Skimmer pumps are normally louder during the rst 2-3 weeks until a
bacterial coat lubricates the rotor.
*IceCap reserves the right to change/modify
this product without notice.
In order to save on
unnecessary waste
with elaborate printed
documents that no one reads, we
have assembled online guides and
video tutorials that cover the basic
essentials of how to assemble, setup
and operate your new skimmer.

Assemble Accordingly
Locate, inspect and identify all components supplied with your new protein
skimmer. Please refer to the parts and assembly diagram.
6 - 9in
Suggested Water Height
Install in Sump
Carefully install the skimmer in your sump at the suggested water depth.
The optional mounting bracket can be used to suspend the the skimmer
along side of sump. With the output valve completely open, plug the
skimmer pump power plug into electrical socket.
Parts &
Assembly
Diagram
Operating Your Skimmer
To tune the skimmer to your aquarium, simply close the output valve by
turning it counter clockwise until you retain pea size bubbles at the point
where the collection cup mounts to the skimmer body. Allow the skimmer
to acclimate to the new setting for 24hrs or more before making any further
adjustments. The more closed the output valve becomes the wetter the
collection will become.
WARNING: Do not attempt
dialing in a protein skimmer
any sooner than 2 weeks.
The wetter the collection
(more closed the valve is)
the greater chance for the
skimmer to overow.
1
2
3
Larger Bubbles
Smaller
Bubbles
1: Screw(1pcs)
3: Top Cover
4: Collection Cup
2: Silencer
5: O-ring
8: Skimmer Body
13: Skimmer Base
9: Adjusting Valve
6: Adjusting Pipe
17: Air Intake Device
14: Output Adapter
7: Screw(1pcs)
16: Air Hose
15: DCAir-700 Pump
11: Screw(2pcs)
12: Screw(4pcs)
18: Optional
Mounting Bracket