Ichoice Ox200 User manual

Bluetooth Indicator

Heart Rate (PR)

Signal Strength

Pulse Bar

Oxygen Level (SpO2)

Battery Indicator

OX200 User Manual

1. Read the manual carefully before use.

2. The fingertip sensor is sensitive to motion. Keep your hand still while

in use.

3. The fingertip sensor requires a sufficient blood flow to obtain proper

readings. Poor blood circulation can result in inaccurate readings.

If your hands are cold or you have poor circulation, warm up your

hands before attempting to obtain a reading.

4. A tourniquet, blood pressure cuff or other blood flow hindrances may

also result in inaccurate readings.

5. Nail polish and/or acrylic nails may also affect the readings. We

reccommend turning your finger on it's side when in use.

6. Your finger must be clean for a proper reading.

7. The fingertip sensor must be clean for a proper reading.

8. If a reading is difficult to obtain, switch to another finger or to the

other hand.

9. There are a number of other conditions which may lead to an

inaccurate reading including but not limited to recent medical tests

that included an injection of dyes, use of arterial catheters, a weak

pulse, low levels of hemoglobin in the blood, low perfusion (the

quality of your pulse), elevated levels of dysfunctional hemoglobin,

the strength and type of light that you are in while using the pulse

oximeter and the existence of transmitters within certain ranges of

the sensor during use.

10.The sensor will not alert you if your readings are out of normal range.

There is no SpO2alarms; it is not for continuous monitoring, as

indicated by the symbol.

11.Explosion hazard: Do not use the sensor in an explosive atmosphere.

1. Clean the device with a soft cloth dampened with isopropyl

alcohol. Do not pour or spray any liquids onto the sensor. Do

not allow any liquid to enter any openings in the device. Allow

the sensor to dry thoroughly before use.

2. The rubber inside of the sensor is composed of medical grade

rubber. It is Latex Free, non-toxic, and not harmful to the skin.

3. The sensor requires no routine calibration or maintenance.

4. Follow local ordinances and recycling instructions regarding

disposal or recycling of the device and device components,

including batteries.

1. Using your nail, easily open the small rubber cover to expose

the micro USB port. Insert the micro USB end (See A) into the

oximeter's charging port

2. Place the USB end (See B) into any

USB power adapter (not included)

or a USB port on your laptop or computer.

3. When charging, the battery icon

on the display will blink. It is fully charged

when the icon stops blinking.

4. The battery can support 2 hours of continuous

use or approximately 400 measurements.

Note: Make sure the power adapter’s output

voltage is DC5V and output current is ≤1000mAh

Warnings: 1. Keep the oximeter away from young children - small items

such as the USB cable are a choking hazard. 2. Please do not take

a measurement when the device is charging.

1. Open the clamp as shown in the picture above. Using your

thumb and pointer, gently squeeze the back end of the

unit. Place one of your fingers into the opening. Your finger

should be inserted fully.

2. The unit will automatically turn on when the unit is opened

and a finger is inserted. It will automatically begin taking a

reading.

Remember to keep your hands still for the reading. Do not

shake your finger during the test. It is recommended that

you do not move your body while taking a reading.

3. The display will automatically show your pulse rate and

oxygen level readings after a few seconds. Note: Your

pulse rate will not stabilize. It will constantly change as

your pulse rate is based on your heart beats.

4. When there is no signal, a low signal is detected, or a

finger is removed, the unit will power off automatically.

1. Search for the ichoiceRelax app in the App store or Google Play

Store. Download the App.

2. Launch the app and fill out the proper fields (You will need a

valid email address).

3. The app will automatically look for a compatible heart rate

sensor within range. You must place the heart rate sensor on

your finger to turn it on. Once connected, the app will load.*

*You cannot access the app without a heart rate sensor. If there

is no signal from the sensor and/or you remove the sensor from

your finger, the app will lock and begin seaching again for a unit

within range.

ichoiceRelax App Features

COACH – Exercises to help guide your breathing with on-screen

pacers driven by your live heart rate readings.

RELAX – Various calming videos with relaxing sounds. Follow the

on-screen pacer driven by your live heart rate readings or close

your eyes and allow the sounds to guide you.

SLEEP - Choose between calming videos with relaxing sounds to

help you fall asleep. Follow the on-screen pacers driven by your

live heart rate readings or close your eyes and allow the sounds to

guide you.

MONITOR - Optional meters help you take readings via the

fingertip sensor and compare the results in charts and graphs.

Filter results by last 7 days, week, month, and year.

3 Minute Baseline Meter - Shows your current relaxation state

and generates an inner balance trend based on your calm vs.

stress readings.

30 Second Spot Check - Easily obtain your heart rate and

oxygen level at any given time.

The ichoiceRelax App uses continuous and accurate heart rate

readings to guide you into a state of relaxation to help reduce your

stress, calm you down and improve health and focus.

The fingertip sensor sends continuous heart rate readings to the

app to help coach and guide you to breathe at your ideal relaxation

breathing rate.

Everyone’s physiology is different and each person will have their

own ideal relaxation breathing rate based on their current mindset.

Your live heart rate readings (obtained by the heart rate sensor) will

help personalize exercises and guide you to breathe at the rate that

is ideal for you to achieve maximum calmness. Our app synchronizes

with your physiology giving you a personalized result.

1. Display: LED display

Low power indication: Battery icon will blink

2. Power Requirement: Lithium battery (250mAh) for power supply

Battery Life: Up to 2 hours (250mAh, 3.7V lithium battery)

Input Voltage: AC100V-240V, Input frequency: 50Hz-60Hz

Output Voltage: DC5V, Output current: 1000mA (Max)

3. Resolution: ±1% for SpO2and ±1 BPM for Pulse Rate

4. Measurement Range: Measuring range for SpO2: 70-100%

Measuring range for PR: 30-250 BPM

5. Measurement Accuracy:

SpO2: 70-100%, ±2 digits; <70%, no definition

PR: 30~99 BPM, ±2 BPM; 100~250 BPM, ±2%

6. Environment Requirement:

Operation Temperature: 41°F~104°F (5°C~40°C)

Storage Temperature: -13°F~158°F (-25°C~70°C )

Ambient Humidity: 15%~93% no condensation in operation;

≤93% no condensation in storage/transport

Atmosphere pressure: 70kPa~106kPa

7. Automatic Power Off: The fingertip sensor will power off automatically

after 8 seconds when the finger is removed.

8. It is recommended that the product be kept in a dry place. A damp

ambient might affect its lifetime and even might damage the product.

9. Declaration: EMC of this product complies with IEC60601-1-2 standard.

The materials which users can come into contact with are non-toxic

and comply with ISO10993-1, ISO10993-5 and ISO10993-10.

Inaccurate measurements may be caused by FACTORS INCLUDING BUT

NOT LIMITED TO:

12.Ethylene oxide sterilizing or immersing the sensors in liquid.

13.Significant levels of dysfunctional hemoglobin (such ascarbonxy-

hemoglobin or methemoglobin).

14.Intravascular dyes such as indocyanine green or methylene blue.

15.SpO2measurements may be adversely affected in the presence of

high ambient light such as direct sunlight. In bright light conditions,

cover the sensor area if necessary.

16.Excessive user movement.

17.High-frequency electrosurgical interference and defibrillators.

18.Venous pulsations.

19.Hypotension, severe vasoconstriction, severe anemia or hypothermia. My display shows

an error message.

My sensor will not

connect to the app

The app reads

"heart rate error"

I cannot navigate

the app

The sensor will not

give a reading.

The readings are

not accurate.

The sensor will not

power on.

Issue Possible Reason

Compliance

Test

Solution

Electromagnetic Environment - Guidance

1. You're wearing fingernail polish and/or

arcylic nails

2. Your hands are too cold / there is not

enough blood flowing to the fingertip

3. The battery on your sensor is low

4. Too much movement

1. The battery are low

2. The pulse oximeter is damaged

1. There is an internal error with your unit

1. You are not in the correct app

2. Your fingertip sensor is off

3. Your finger is not inside the sensor

4. The sensor is having trouble getting a

reading

5. Your sensor is not within Bluetooth range

6. Your phone's bluetooth is off

1. Contact customer service

1. Make sure you downloaded

ichoiceRelax app.

2. Make sure your finger is inside the

sensor and the unit is powered on.

3. Rub your hands together to generate

heat and get blood flowing to your

fingertips.

4. Make sure the unit and phone are

close proximity

5. Turn your phone's bluetooth on

1. Charge the unit

2. Contact customer service

04222019_v5

Guidance and manufacturer’s declaration – electromagnetic emission

RF emissions

CISPR 11 Group 1

Class B

RF emission

CISPR 11

The pulse oximeter uses RF energy only for its internal function.

Therefore, its RF emissions are very low and are not likely to cause

any interference in nearby electronic equipment.

The pulse oximeter is suitable for use in all establishments,

including domestic establishments and those directly connected

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

The pulse oximeter is intended for use in the electromagnetic environment specified below.

The customer or the user of the pulse oximeter should assure that it is used in such an

environment.

Distributed by:

ChoiceMMed America Corp.

2558 Pearl Buck Rd: Suite 8A

Bristol, PA 19007

Phone: (215) 874-0458

www.ichoicerelax.com

ChoiceMMed America Corp.

1. Keep the fingertip sensor away from young children. Small parts

may be hazardous if swallowed.

Thank you for purchasing the iChoice SMART pulse oximeter +

relaxation coach. With proper use, this system will teach you how to

breathe at your Personal Best Relaxation Breathing Rate to help reduce

stress, calm you down, and improve your health and focus. The fingertip

sensor transmits vital readings in real-time to the free ichoiceRelax app.

Using these live readings, the app will personalize breathing exercises to

help you achieve optimum relaxation.

The smart fingertip sensor can also be used as a pulse oximeter to spot

check your blood oxygen saturation (in % SpO2) and your pulse rate.

The SMART pulse oximeter + relaxation coach is for general wellness

and health applications including sports, fitness, and relaxation

management. It is not intended to be used in prevention, diagnosis, or

treatment of any disease.

Box Contents

1. SMART pulse oximeter + relaxation coach

2. User Manual

3. Carrying Pouch

4. Micro USB Charger

ichoiceRelax App

Phone Compatibility

iOS 12.0 + and Android 5.0+

1. Turn your finger on it's side

2. Rub your hands together to generate

heat and get blood flowing to your

fingertips

3. Charge your unit

4. Make sure your hand is resting and

there is little to no movement

Symbol Symbol

Definition Definition

SpO2%

PR bpm

IP22

Oxygen Level

Pulse Rate (beats per minute)

Serial Number

Protected against dripping

water Follow instructions

for use

Conformity to WEEE

Directive

Type BF applied part

Storage temperature and

relative humidity

Battery Indicator

GENERAL DESCRIPTION

PRECAUTIONS FOR USE

MAINTENANCE

TROUBLE SHOOTINGCONNECTING TO APP (optional)PULSE OXIMETER DISPLAY

GENERAL USE INSTRUCTIONS

CHARGING THE UNIT

TECHNICAL SPECIFICATIONS

WARNINGS

SYMBOL DEFINITIONS

A normal SpO2reading typically ranges from 95%-99%.

A normal at rest Pulse Rate reading ranges between 60-100

beats per minute.

If you have questions regarding your SpO2or Pulse Rate readings

we recommend speaking with your healthcare professional.

Note:

1. The pulse bar indicates the adequacy of Pulse Rate and SpO2.

If the bar shows less than 30%, readings may be inaccurate.

2. If the screen displays the signal strength symbol (?), the unit

is having trouble getting a reading. Keep your hands still and

retry.

Bluetooth Indicator

Heart Rate (PR)

Signal Strength

Pulse Bar

Oxygen Level (SpO2)

Battery Indicator

OX200 User Manual

1. Read the manual carefully before use.

2. The fingertip sensor is sensitive to motion. Keep your hand still while

in use.

3. The fingertip sensor requires a sufficient blood flow to obtain proper

readings. Poor blood circulation can result in inaccurate readings.

If your hands are cold or you have poor circulation, warm up your

hands before attempting to obtain a reading.

4. A tourniquet, blood pressure cuff or other blood flow hindrances may

also result in inaccurate readings.

5. Nail polish and/or acrylic nails may also affect the readings. We

reccommend turning your finger on it's side when in use.

6. Your finger must be clean for a proper reading.

7. The fingertip sensor must be clean for a proper reading.

8. If a reading is difficult to obtain, switch to another finger or to the

other hand.

9. There are a number of other conditions which may lead to an

inaccurate reading including but not limited to recent medical tests

that included an injection of dyes, use of arterial catheters, a weak

pulse, low levels of hemoglobin in the blood, low perfusion (the

quality of your pulse), elevated levels of dysfunctional hemoglobin,

the strength and type of light that you are in while using the pulse

oximeter and the existence of transmitters within certain ranges of

the sensor during use.

10.The sensor will not alert you if your readings are out of normal range.

There is no SpO2alarms; it is not for continuous monitoring, as

indicated by the symbol.

11.Explosion hazard: Do not use the sensor in an explosive atmosphere.

1. Clean the device with a soft cloth dampened with isopropyl

alcohol. Do not pour or spray any liquids onto the sensor. Do

not allow any liquid to enter any openings in the device. Allow

the sensor to dry thoroughly before use.

2. The rubber inside of the sensor is composed of medical grade

rubber. It is Latex Free, non-toxic, and not harmful to the skin.

3. The sensor requires no routine calibration or maintenance.

4. Follow local ordinances and recycling instructions regarding

disposal or recycling of the device and device components,

including batteries.

1. Using your nail, easily open the small rubber cover to expose

the micro USB port. Insert the micro USB end (See A) into the

oximeter's charging port

2. Place the USB end (See B) into any

USB power adapter (not included)

or a USB port on your laptop or computer.

3. When charging, the battery icon

on the display will blink. It is fully charged

when the icon stops blinking.

4. The battery can support 2 hours of continuous

use or approximately 400 measurements.

Note: Make sure the power adapter’s output

voltage is DC5V and output current is ≤1000mAh

Warnings: 1. Keep the oximeter away from young children - small items

such as the USB cable are a choking hazard. 2. Please do not take

a measurement when the device is charging.

1. Open the clamp as shown in the picture above. Using your

thumb and pointer, gently squeeze the back end of the

unit. Place one of your fingers into the opening. Your finger

should be inserted fully.

2. The unit will automatically turn on when the unit is opened

and a finger is inserted. It will automatically begin taking a

reading.

Remember to keep your hands still for the reading. Do not

shake your finger during the test. It is recommended that

you do not move your body while taking a reading.

3. The display will automatically show your pulse rate and

oxygen level readings after a few seconds. Note: Your

pulse rate will not stabilize. It will constantly change as

your pulse rate is based on your heart beats.

4. When there is no signal, a low signal is detected, or a

finger is removed, the unit will power off automatically.

1. Search for the ichoiceRelax app in the App store or Google Play

Store. Download the App.

2. Launch the app and fill out the proper fields (You will need a

valid email address).

3. The app will automatically look for a compatible heart rate

sensor within range. You must place the heart rate sensor on

your finger to turn it on. Once connected, the app will load.*

*You cannot access the app without a heart rate sensor. If there

is no signal from the sensor and/or you remove the sensor from

your finger, the app will lock and begin seaching again for a unit

within range.

ichoiceRelax App Features

COACH – Exercises to help guide your breathing with on-screen

pacers driven by your live heart rate readings.

RELAX – Various calming videos with relaxing sounds. Follow the

on-screen pacer driven by your live heart rate readings or close

your eyes and allow the sounds to guide you.

SLEEP - Choose between calming videos with relaxing sounds to

help you fall asleep. Follow the on-screen pacers driven by your

live heart rate readings or close your eyes and allow the sounds to

guide you.

MONITOR - Optional meters help you take readings via the

fingertip sensor and compare the results in charts and graphs.

Filter results by last 7 days, week, month, and year.

3 Minute Baseline Meter - Shows your current relaxation state

and generates an inner balance trend based on your calm vs.

stress readings.

30 Second Spot Check - Easily obtain your heart rate and

oxygen level at any given time.

The ichoiceRelax App uses continuous and accurate heart rate

readings to guide you into a state of relaxation to help reduce your

stress, calm you down and improve health and focus.

The fingertip sensor sends continuous heart rate readings to the

app to help coach and guide you to breathe at your ideal relaxation

breathing rate.

Everyone’s physiology is different and each person will have their

own ideal relaxation breathing rate based on their current mindset.

Your live heart rate readings (obtained by the heart rate sensor) will

help personalize exercises and guide you to breathe at the rate that

is ideal for you to achieve maximum calmness. Our app synchronizes

with your physiology giving you a personalized result.

1. Display: LED display

Low power indication: Battery icon will blink

2. Power Requirement: Lithium battery (250mAh) for power supply

Battery Life: Up to 2 hours (250mAh, 3.7V lithium battery)

Input Voltage: AC100V-240V, Input frequency: 50Hz-60Hz

Output Voltage: DC5V, Output current: 1000mA (Max)

3. Resolution: ±1% for SpO2and ±1 BPM for Pulse Rate

4. Measurement Range: Measuring range for SpO2: 70-100%

Measuring range for PR: 30-250 BPM

5. Measurement Accuracy:

SpO2: 70-100%, ±2 digits; <70%, no definition

PR: 30~99 BPM, ±2 BPM; 100~250 BPM, ±2%

6. Environment Requirement:

Operation Temperature: 41°F~104°F (5°C~40°C)

Storage Temperature: -13°F~158°F (-25°C~70°C )

Ambient Humidity: 15%~93% no condensation in operation;

≤93% no condensation in storage/transport

Atmosphere pressure: 70kPa~106kPa

7. Automatic Power Off: The fingertip sensor will power off automatically

after 8 seconds when the finger is removed.

8. It is recommended that the product be kept in a dry place. A damp

ambient might affect its lifetime and even might damage the product.

9. Declaration: EMC of this product complies with IEC60601-1-2 standard.

The materials which users can come into contact with are non-toxic

and comply with ISO10993-1, ISO10993-5 and ISO10993-10.

Inaccurate measurements may be caused by FACTORS INCLUDING BUT

NOT LIMITED TO:

12.Ethylene oxide sterilizing or immersing the sensors in liquid.

13.Significant levels of dysfunctional hemoglobin (such ascarbonxy-

hemoglobin or methemoglobin).

14.Intravascular dyes such as indocyanine green or methylene blue.

15.SpO2measurements may be adversely affected in the presence of

high ambient light such as direct sunlight. In bright light conditions,

cover the sensor area if necessary.

16.Excessive user movement.

17.High-frequency electrosurgical interference and defibrillators.

18.Venous pulsations.

19.Hypotension, severe vasoconstriction, severe anemia or hypothermia. My display shows

an error message.

My sensor will not

connect to the app

The app reads

"heart rate error"

I cannot navigate

the app

The sensor will not

give a reading.

The readings are

not accurate.

The sensor will not

power on.

Issue Possible Reason

Compliance

Test

Solution

Electromagnetic Environment - Guidance

1. You're wearing fingernail polish and/or

arcylic nails

2. Your hands are too cold / there is not

enough blood flowing to the fingertip

3. The battery on your sensor is low

4. Too much movement

1. The battery are low

2. The pulse oximeter is damaged

1. There is an internal error with your unit

1. You are not in the correct app

2. Your fingertip sensor is off

3. Your finger is not inside the sensor

4. The sensor is having trouble getting a

reading

5. Your sensor is not within Bluetooth range

6. Your phone's bluetooth is off

1. Contact customer service

1. Make sure you downloaded

ichoiceRelax app.

2. Make sure your finger is inside the

sensor and the unit is powered on.

3. Rub your hands together to generate

heat and get blood flowing to your

fingertips.

4. Make sure the unit and phone are

close proximity

5. Turn your phone's bluetooth on

1. Charge the unit

2. Contact customer service

04222019_v5

Guidance and manufacturer’s declaration – electromagnetic emission

RF emissions

CISPR 11 Group 1

Class B

RF emission

CISPR 11

The pulse oximeter uses RF energy only for its internal function.

Therefore, its RF emissions are very low and are not likely to cause

any interference in nearby electronic equipment.

The pulse oximeter is suitable for use in all establishments,

including domestic establishments and those directly connected

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

The pulse oximeter is intended for use in the electromagnetic environment specified below.

The customer or the user of the pulse oximeter should assure that it is used in such an

environment.

Distributed by:

ChoiceMMed America Corp.

2558 Pearl Buck Rd: Suite 8A

Bristol, PA 19007

Phone: (215) 874-0458

www.ichoicerelax.com

ChoiceMMed America Corp.

1. Keep the fingertip sensor away from young children. Small parts

may be hazardous if swallowed.

Thank you for purchasing the iChoice SMART pulse oximeter +

relaxation coach. With proper use, this system will teach you how to

breathe at your Personal Best Relaxation Breathing Rate to help reduce

stress, calm you down, and improve your health and focus. The fingertip

sensor transmits vital readings in real-time to the free ichoiceRelax app.

Using these live readings, the app will personalize breathing exercises to

help you achieve optimum relaxation.

The smart fingertip sensor can also be used as a pulse oximeter to spot

check your blood oxygen saturation (in % SpO2) and your pulse rate.

The SMART pulse oximeter + relaxation coach is for general wellness

and health applications including sports, fitness, and relaxation

management. It is not intended to be used in prevention, diagnosis, or

treatment of any disease.

Box Contents

1. SMART pulse oximeter + relaxation coach

2. User Manual

3. Carrying Pouch

4. Micro USB Charger

ichoiceRelax App

Phone Compatibility

iOS 12.0 + and Android 5.0+

1. Turn your finger on it's side

2. Rub your hands together to generate

heat and get blood flowing to your

fingertips

3. Charge your unit

4. Make sure your hand is resting and

there is little to no movement

Symbol Symbol

Definition Definition

SpO2%

PR bpm

IP22

Oxygen Level

Pulse Rate (beats per minute)

Serial Number

Protected against dripping

water Follow instructions

for use

Conformity to WEEE

Directive

Type BF applied part

Storage temperature and

relative humidity

Battery Indicator

GENERAL DESCRIPTION

PRECAUTIONS FOR USE

MAINTENANCE

TROUBLE SHOOTINGCONNECTING TO APP (optional)PULSE OXIMETER DISPLAY

GENERAL USE INSTRUCTIONS

CHARGING THE UNIT

TECHNICAL SPECIFICATIONS

WARNINGS

SYMBOL DEFINITIONS

A normal SpO2reading typically ranges from 95%-99%.

A normal at rest Pulse Rate reading ranges between 60-100

beats per minute.

If you have questions regarding your SpO2or Pulse Rate readings

we recommend speaking with your healthcare professional.

Note:

1. The pulse bar indicates the adequacy of Pulse Rate and SpO2.

If the bar shows less than 30%, readings may be inaccurate.

2. If the screen displays the signal strength symbol (?), the unit

is having trouble getting a reading. Keep your hands still and

retry.

Bluetooth Indicator

Heart Rate (PR)

Signal Strength

Pulse Bar

Oxygen Level (SpO2)

Battery Indicator

OX200 User Manual

1. Read the manual carefully before use.

2. The fingertip sensor is sensitive to motion. Keep your hand still while

in use.

3. The fingertip sensor requires a sufficient blood flow to obtain proper

readings. Poor blood circulation can result in inaccurate readings.

If your hands are cold or you have poor circulation, warm up your

hands before attempting to obtain a reading.

4. A tourniquet, blood pressure cuff or other blood flow hindrances may

also result in inaccurate readings.

5. Nail polish and/or acrylic nails may also affect the readings. We

reccommend turning your finger on it's side when in use.

6. Your finger must be clean for a proper reading.

7. The fingertip sensor must be clean for a proper reading.

8. If a reading is difficult to obtain, switch to another finger or to the

other hand.

9. There are a number of other conditions which may lead to an

inaccurate reading including but not limited to recent medical tests

that included an injection of dyes, use of arterial catheters, a weak

pulse, low levels of hemoglobin in the blood, low perfusion (the

quality of your pulse), elevated levels of dysfunctional hemoglobin,

the strength and type of light that you are in while using the pulse

oximeter and the existence of transmitters within certain ranges of

the sensor during use.

10.The sensor will not alert you if your readings are out of normal range.

There is no SpO2alarms; it is not for continuous monitoring, as

indicated by the symbol.

11.Explosion hazard: Do not use the sensor in an explosive atmosphere.

1. Clean the device with a soft cloth dampened with isopropyl

alcohol. Do not pour or spray any liquids onto the sensor. Do

not allow any liquid to enter any openings in the device. Allow

the sensor to dry thoroughly before use.

2. The rubber inside of the sensor is composed of medical grade

rubber. It is Latex Free, non-toxic, and not harmful to the skin.

3. The sensor requires no routine calibration or maintenance.

4. Follow local ordinances and recycling instructions regarding

disposal or recycling of the device and device components,

including batteries.

1. Using your nail, easily open the small rubber cover to expose

the micro USB port. Insert the micro USB end (See A) into the

oximeter's charging port

2. Place the USB end (See B) into any

USB power adapter (not included)

or a USB port on your laptop or computer.

3. When charging, the battery icon

on the display will blink. It is fully charged

when the icon stops blinking.

4. The battery can support 2 hours of continuous

use or approximately 400 measurements.

Note: Make sure the power adapter’s output

voltage is DC5V and output current is ≤1000mAh

Warnings: 1. Keep the oximeter away from young children - small items

such as the USB cable are a choking hazard. 2. Please do not take

a measurement when the device is charging.

1. Open the clamp as shown in the picture above. Using your

thumb and pointer, gently squeeze the back end of the

unit. Place one of your fingers into the opening. Your finger

should be inserted fully.

2. The unit will automatically turn on when the unit is opened

and a finger is inserted. It will automatically begin taking a

reading.

Remember to keep your hands still for the reading. Do not

shake your finger during the test. It is recommended that

you do not move your body while taking a reading.

3. The display will automatically show your pulse rate and

oxygen level readings after a few seconds. Note: Your

pulse rate will not stabilize. It will constantly change as

your pulse rate is based on your heart beats.

4. When there is no signal, a low signal is detected, or a

finger is removed, the unit will power off automatically.

1. Search for the ichoiceRelax app in the App store or Google Play

Store. Download the App.

2. Launch the app and fill out the proper fields (You will need a

valid email address).

3. The app will automatically look for a compatible heart rate

sensor within range. You must place the heart rate sensor on

your finger to turn it on. Once connected, the app will load.*

*You cannot access the app without a heart rate sensor. If there

is no signal from the sensor and/or you remove the sensor from

your finger, the app will lock and begin seaching again for a unit

within range.

ichoiceRelax App Features

COACH – Exercises to help guide your breathing with on-screen

pacers driven by your live heart rate readings.

RELAX – Various calming videos with relaxing sounds. Follow the

on-screen pacer driven by your live heart rate readings or close

your eyes and allow the sounds to guide you.

SLEEP - Choose between calming videos with relaxing sounds to

help you fall asleep. Follow the on-screen pacers driven by your

live heart rate readings or close your eyes and allow the sounds to

guide you.

MONITOR - Optional meters help you take readings via the

fingertip sensor and compare the results in charts and graphs.

Filter results by last 7 days, week, month, and year.

3 Minute Baseline Meter - Shows your current relaxation state

and generates an inner balance trend based on your calm vs.

stress readings.

30 Second Spot Check - Easily obtain your heart rate and

oxygen level at any given time.

The ichoiceRelax App uses continuous and accurate heart rate

readings to guide you into a state of relaxation to help reduce your

stress, calm you down and improve health and focus.

The fingertip sensor sends continuous heart rate readings to the

app to help coach and guide you to breathe at your ideal relaxation

breathing rate.

Everyone’s physiology is different and each person will have their

own ideal relaxation breathing rate based on their current mindset.

Your live heart rate readings (obtained by the heart rate sensor) will

help personalize exercises and guide you to breathe at the rate that

is ideal for you to achieve maximum calmness. Our app synchronizes

with your physiology giving you a personalized result.

1. Display: LED display

Low power indication: Battery icon will blink

2. Power Requirement: Lithium battery (250mAh) for power supply

Battery Life: Up to 2 hours (250mAh, 3.7V lithium battery)

Input Voltage: AC100V-240V, Input frequency: 50Hz-60Hz

Output Voltage: DC5V, Output current: 1000mA (Max)

3. Resolution: ±1% for SpO2and ±1 BPM for Pulse Rate

4. Measurement Range: Measuring range for SpO2: 70-100%

Measuring range for PR: 30-250 BPM

5. Measurement Accuracy:

SpO2: 70-100%, ±2 digits; <70%, no definition

PR: 30~99 BPM, ±2 BPM; 100~250 BPM, ±2%

6. Environment Requirement:

Operation Temperature: 41°F~104°F (5°C~40°C)

Storage Temperature: -13°F~158°F (-25°C~70°C )

Ambient Humidity: 15%~93% no condensation in operation;

≤93% no condensation in storage/transport

Atmosphere pressure: 70kPa~106kPa

7. Automatic Power Off: The fingertip sensor will power off automatically

after 8 seconds when the finger is removed.

8. It is recommended that the product be kept in a dry place. A damp

ambient might affect its lifetime and even might damage the product.

9. Declaration: EMC of this product complies with IEC60601-1-2 standard.

The materials which users can come into contact with are non-toxic

and comply with ISO10993-1, ISO10993-5 and ISO10993-10.

Inaccurate measurements may be caused by FACTORS INCLUDING BUT

NOT LIMITED TO:

12.Ethylene oxide sterilizing or immersing the sensors in liquid.

13.Significant levels of dysfunctional hemoglobin (such ascarbonxy-

hemoglobin or methemoglobin).

14.Intravascular dyes such as indocyanine green or methylene blue.

15.SpO2measurements may be adversely affected in the presence of

high ambient light such as direct sunlight. In bright light conditions,

cover the sensor area if necessary.

16.Excessive user movement.

17.High-frequency electrosurgical interference and defibrillators.

18.Venous pulsations.

19.Hypotension, severe vasoconstriction, severe anemia or hypothermia. My display shows

an error message.

My sensor will not

connect to the app

The app reads

"heart rate error"

I cannot navigate

the app

The sensor will not

give a reading.

The readings are

not accurate.

The sensor will not

power on.

Issue Possible Reason

Compliance

Test

Solution

Electromagnetic Environment - Guidance

1. You're wearing fingernail polish and/or

arcylic nails

2. Your hands are too cold / there is not

enough blood flowing to the fingertip

3. The battery on your sensor is low

4. Too much movement

1. The battery are low

2. The pulse oximeter is damaged

1. There is an internal error with your unit

1. You are not in the correct app

2. Your fingertip sensor is off

3. Your finger is not inside the sensor

4. The sensor is having trouble getting a

reading

5. Your sensor is not within Bluetooth range

6. Your phone's bluetooth is off

1. Contact customer service

1. Make sure you downloaded

ichoiceRelax app.

2. Make sure your finger is inside the

sensor and the unit is powered on.

3. Rub your hands together to generate

heat and get blood flowing to your

fingertips.

4. Make sure the unit and phone are

close proximity

5. Turn your phone's bluetooth on

1. Charge the unit

2. Contact customer service

04222019_v5

Guidance and manufacturer’s declaration – electromagnetic emission

RF emissions

CISPR 11 Group 1

Class B

RF emission

CISPR 11

The pulse oximeter uses RF energy only for its internal function.

Therefore, its RF emissions are very low and are not likely to cause

any interference in nearby electronic equipment.

The pulse oximeter is suitable for use in all establishments,

including domestic establishments and those directly connected

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

The pulse oximeter is intended for use in the electromagnetic environment specified below.

The customer or the user of the pulse oximeter should assure that it is used in such an

environment.

Distributed by:

ChoiceMMed America Corp.

2558 Pearl Buck Rd: Suite 8A

Bristol, PA 19007

Phone: (215) 874-0458

www.ichoicerelax.com

ChoiceMMed America Corp.

1. Keep the fingertip sensor away from young children. Small parts

may be hazardous if swallowed.

Thank you for purchasing the iChoice SMART pulse oximeter +

relaxation coach. With proper use, this system will teach you how to

breathe at your Personal Best Relaxation Breathing Rate to help reduce

stress, calm you down, and improve your health and focus. The fingertip

sensor transmits vital readings in real-time to the free ichoiceRelax app.

Using these live readings, the app will personalize breathing exercises to

help you achieve optimum relaxation.

The smart fingertip sensor can also be used as a pulse oximeter to spot

check your blood oxygen saturation (in % SpO2) and your pulse rate.

The SMART pulse oximeter + relaxation coach is for general wellness

and health applications including sports, fitness, and relaxation

management. It is not intended to be used in prevention, diagnosis, or

treatment of any disease.

Box Contents

1. SMART pulse oximeter + relaxation coach

2. User Manual

3. Carrying Pouch

4. Micro USB Charger

ichoiceRelax App

Phone Compatibility

iOS 12.0 + and Android 5.0+

1. Turn your finger on it's side

2. Rub your hands together to generate

heat and get blood flowing to your

fingertips

3. Charge your unit

4. Make sure your hand is resting and

there is little to no movement

Symbol Symbol

Definition Definition

SpO2%

PR bpm

IP22

Oxygen Level

Pulse Rate (beats per minute)

Serial Number

Protected against dripping

water Follow instructions

for use

Conformity to WEEE

Directive

Type BF applied part

Storage temperature and

relative humidity

Battery Indicator

GENERAL DESCRIPTION

PRECAUTIONS FOR USE

MAINTENANCE

TROUBLE SHOOTINGCONNECTING TO APP (optional)PULSE OXIMETER DISPLAY

GENERAL USE INSTRUCTIONS

CHARGING THE UNIT

TECHNICAL SPECIFICATIONS

WARNINGS

SYMBOL DEFINITIONS

A normal SpO2reading typically ranges from 95%-99%.

A normal at rest Pulse Rate reading ranges between 60-100

beats per minute.

If you have questions regarding your SpO2or Pulse Rate readings

we recommend speaking with your healthcare professional.

Note:

1. The pulse bar indicates the adequacy of Pulse Rate and SpO2.

If the bar shows less than 30%, readings may be inaccurate.

2. If the screen displays the signal strength symbol (?), the unit

is having trouble getting a reading. Keep your hands still and

retry.

Bluetooth Indicator

Heart Rate (PR)

Signal Strength

Pulse Bar

Oxygen Level (SpO2)

Battery Indicator

OX200 User Manual

1. Read the manual carefully before use.

2. The fingertip sensor is sensitive to motion. Keep your hand still while

in use.

3. The fingertip sensor requires a sufficient blood flow to obtain proper

readings. Poor blood circulation can result in inaccurate readings.

If your hands are cold or you have poor circulation, warm up your

hands before attempting to obtain a reading.

4. A tourniquet, blood pressure cuff or other blood flow hindrances may

also result in inaccurate readings.

5. Nail polish and/or acrylic nails may also affect the readings. We

reccommend turning your finger on it's side when in use.

6. Your finger must be clean for a proper reading.

7. The fingertip sensor must be clean for a proper reading.

8. If a reading is difficult to obtain, switch to another finger or to the

other hand.

9. There are a number of other conditions which may lead to an

inaccurate reading including but not limited to recent medical tests

that included an injection of dyes, use of arterial catheters, a weak

pulse, low levels of hemoglobin in the blood, low perfusion (the

quality of your pulse), elevated levels of dysfunctional hemoglobin,

the strength and type of light that you are in while using the pulse

oximeter and the existence of transmitters within certain ranges of

the sensor during use.

10.The sensor will not alert you if your readings are out of normal range.

There is no SpO2alarms; it is not for continuous monitoring, as

indicated by the symbol.

11.Explosion hazard: Do not use the sensor in an explosive atmosphere.

1. Clean the device with a soft cloth dampened with isopropyl

alcohol. Do not pour or spray any liquids onto the sensor. Do

not allow any liquid to enter any openings in the device. Allow

the sensor to dry thoroughly before use.

2. The rubber inside of the sensor is composed of medical grade

rubber. It is Latex Free, non-toxic, and not harmful to the skin.

3. The sensor requires no routine calibration or maintenance.

4. Follow local ordinances and recycling instructions regarding

disposal or recycling of the device and device components,

including batteries.

1. Using your nail, easily open the small rubber cover to expose

the micro USB port. Insert the micro USB end (See A) into the

oximeter's charging port

2. Place the USB end (See B) into any

USB power adapter (not included)

or a USB port on your laptop or computer.

3. When charging, the battery icon

on the display will blink. It is fully charged

when the icon stops blinking.

4. The battery can support 2 hours of continuous

use or approximately 400 measurements.

Note: Make sure the power adapter’s output

voltage is DC5V and output current is ≤1000mAh

Warnings: 1. Keep the oximeter away from young children - small items

such as the USB cable are a choking hazard. 2. Please do not take

a measurement when the device is charging.

1. Open the clamp as shown in the picture above. Using your

thumb and pointer, gently squeeze the back end of the

unit. Place one of your fingers into the opening. Your finger

should be inserted fully.

2. The unit will automatically turn on when the unit is opened

and a finger is inserted. It will automatically begin taking a

reading.

Remember to keep your hands still for the reading. Do not

shake your finger during the test. It is recommended that

you do not move your body while taking a reading.

3. The display will automatically show your pulse rate and

oxygen level readings after a few seconds. Note: Your

pulse rate will not stabilize. It will constantly change as

your pulse rate is based on your heart beats.

4. When there is no signal, a low signal is detected, or a

finger is removed, the unit will power off automatically.

1. Search for the ichoiceRelax app in the App store or Google Play

Store. Download the App.

2. Launch the app and fill out the proper fields (You will need a

valid email address).

3. The app will automatically look for a compatible heart rate

sensor within range. You must place the heart rate sensor on

your finger to turn it on. Once connected, the app will load.*

*You cannot access the app without a heart rate sensor. If there

is no signal from the sensor and/or you remove the sensor from

your finger, the app will lock and begin seaching again for a unit

within range.

ichoiceRelax App Features

COACH – Exercises to help guide your breathing with on-screen

pacers driven by your live heart rate readings.

RELAX – Various calming videos with relaxing sounds. Follow the

on-screen pacer driven by your live heart rate readings or close

your eyes and allow the sounds to guide you.

SLEEP - Choose between calming videos with relaxing sounds to

help you fall asleep. Follow the on-screen pacers driven by your

live heart rate readings or close your eyes and allow the sounds to

guide you.

MONITOR - Optional meters help you take readings via the

fingertip sensor and compare the results in charts and graphs.

Filter results by last 7 days, week, month, and year.

3 Minute Baseline Meter - Shows your current relaxation state

and generates an inner balance trend based on your calm vs.

stress readings.

30 Second Spot Check - Easily obtain your heart rate and

oxygen level at any given time.

The ichoiceRelax App uses continuous and accurate heart rate

readings to guide you into a state of relaxation to help reduce your

stress, calm you down and improve health and focus.

The fingertip sensor sends continuous heart rate readings to the

app to help coach and guide you to breathe at your ideal relaxation

breathing rate.

Everyone’s physiology is different and each person will have their

own ideal relaxation breathing rate based on their current mindset.

Your live heart rate readings (obtained by the heart rate sensor) will

help personalize exercises and guide you to breathe at the rate that

is ideal for you to achieve maximum calmness. Our app synchronizes

with your physiology giving you a personalized result.

1. Display: LED display

Low power indication: Battery icon will blink

2. Power Requirement: Lithium battery (250mAh) for power supply

Battery Life: Up to 2 hours (250mAh, 3.7V lithium battery)

Input Voltage: AC100V-240V, Input frequency: 50Hz-60Hz

Output Voltage: DC5V, Output current: 1000mA (Max)

3. Resolution: ±1% for SpO2and ±1 BPM for Pulse Rate

4. Measurement Range: Measuring range for SpO2: 70-100%

Measuring range for PR: 30-250 BPM

5. Measurement Accuracy:

SpO2: 70-100%, ±2 digits; <70%, no definition

PR: 30~99 BPM, ±2 BPM; 100~250 BPM, ±2%

6. Environment Requirement:

Operation Temperature: 41°F~104°F (5°C~40°C)

Storage Temperature: -13°F~158°F (-25°C~70°C )

Ambient Humidity: 15%~93% no condensation in operation;

≤93% no condensation in storage/transport

Atmosphere pressure: 70kPa~106kPa

7. Automatic Power Off: The fingertip sensor will power off automatically

after 8 seconds when the finger is removed.

8. It is recommended that the product be kept in a dry place. A damp

ambient might affect its lifetime and even might damage the product.

9. Declaration: EMC of this product complies with IEC60601-1-2 standard.

The materials which users can come into contact with are non-toxic

and comply with ISO10993-1, ISO10993-5 and ISO10993-10.

Inaccurate measurements may be caused by FACTORS INCLUDING BUT

NOT LIMITED TO:

12.Ethylene oxide sterilizing or immersing the sensors in liquid.

13.Significant levels of dysfunctional hemoglobin (such ascarbonxy-

hemoglobin or methemoglobin).

14.Intravascular dyes such as indocyanine green or methylene blue.

15.SpO2measurements may be adversely affected in the presence of

high ambient light such as direct sunlight. In bright light conditions,

cover the sensor area if necessary.

16.Excessive user movement.

17.High-frequency electrosurgical interference and defibrillators.

18.Venous pulsations.

19.Hypotension, severe vasoconstriction, severe anemia or hypothermia. My display shows

an error message.

My sensor will not

connect to the app

The app reads

"heart rate error"

I cannot navigate

the app

The sensor will not

give a reading.

The readings are

not accurate.

The sensor will not

power on.

Issue Possible Reason

Compliance

Test

Solution

Electromagnetic Environment - Guidance

1. You're wearing fingernail polish and/or

arcylic nails

2. Your hands are too cold / there is not

enough blood flowing to the fingertip

3. The battery on your sensor is low

4. Too much movement

1. The battery are low

2. The pulse oximeter is damaged

1. There is an internal error with your unit

1. You are not in the correct app

2. Your fingertip sensor is off

3. Your finger is not inside the sensor

4. The sensor is having trouble getting a

reading

5. Your sensor is not within Bluetooth range

6. Your phone's bluetooth is off

1. Contact customer service

1. Make sure you downloaded

ichoiceRelax app.

2. Make sure your finger is inside the

sensor and the unit is powered on.

3. Rub your hands together to generate

heat and get blood flowing to your

fingertips.

4. Make sure the unit and phone are

close proximity

5. Turn your phone's bluetooth on

1. Charge the unit

2. Contact customer service

04222019_v5

Guidance and manufacturer’s declaration – electromagnetic emission

RF emissions

CISPR 11 Group 1

Class B

RF emission

CISPR 11

The pulse oximeter uses RF energy only for its internal function.

Therefore, its RF emissions are very low and are not likely to cause

any interference in nearby electronic equipment.

The pulse oximeter is suitable for use in all establishments,

including domestic establishments and those directly connected

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

The pulse oximeter is intended for use in the electromagnetic environment specified below.

The customer or the user of the pulse oximeter should assure that it is used in such an

environment.

Distributed by:

ChoiceMMed America Corp.

2558 Pearl Buck Rd: Suite 8A

Bristol, PA 19007

Phone: (215) 874-0458

www.ichoicerelax.com

ChoiceMMed America Corp.

1. Keep the fingertip sensor away from young children. Small parts

may be hazardous if swallowed.

Thank you for purchasing the iChoice SMART pulse oximeter +

relaxation coach. With proper use, this system will teach you how to

breathe at your Personal Best Relaxation Breathing Rate to help reduce

stress, calm you down, and improve your health and focus. The fingertip

sensor transmits vital readings in real-time to the free ichoiceRelax app.

Using these live readings, the app will personalize breathing exercises to

help you achieve optimum relaxation.

The smart fingertip sensor can also be used as a pulse oximeter to spot

check your blood oxygen saturation (in % SpO2) and your pulse rate.

The SMART pulse oximeter + relaxation coach is for general wellness

and health applications including sports, fitness, and relaxation

management. It is not intended to be used in prevention, diagnosis, or

treatment of any disease.

Box Contents

1. SMART pulse oximeter + relaxation coach

2. User Manual

3. Carrying Pouch

4. Micro USB Charger

ichoiceRelax App

Phone Compatibility

iOS 12.0 + and Android 5.0+

1. Turn your finger on it's side

2. Rub your hands together to generate

heat and get blood flowing to your

fingertips

3. Charge your unit

4. Make sure your hand is resting and

there is little to no movement

Symbol Symbol

Definition Definition

SpO2%

PR bpm

IP22

Oxygen Level

Pulse Rate (beats per minute)

Serial Number

Protected against dripping

water Follow instructions

for use

Conformity to WEEE

Directive

Type BF applied part

Storage temperature and

relative humidity

Battery Indicator

GENERAL DESCRIPTION

PRECAUTIONS FOR USE

MAINTENANCE

TROUBLE SHOOTINGCONNECTING TO APP (optional)PULSE OXIMETER DISPLAY

GENERAL USE INSTRUCTIONS

CHARGING THE UNIT

TECHNICAL SPECIFICATIONS

WARNINGS

SYMBOL DEFINITIONS

A normal SpO2reading typically ranges from 95%-99%.

A normal at rest Pulse Rate reading ranges between 60-100

beats per minute.

If you have questions regarding your SpO2or Pulse Rate readings

we recommend speaking with your healthcare professional.

Note:

1. The pulse bar indicates the adequacy of Pulse Rate and SpO2.

If the bar shows less than 30%, readings may be inaccurate.

2. If the screen displays the signal strength symbol (?), the unit

is having trouble getting a reading. Keep your hands still and

retry.

Bluetooth Indicator

Heart Rate (PR)

Signal Strength

Pulse Bar

Oxygen Level (SpO2)

Battery Indicator

OX200 User Manual

1. Read the manual carefully before use.

2. The fingertip sensor is sensitive to motion. Keep your hand still while

in use.

3. The fingertip sensor requires a sufficient blood flow to obtain proper

readings. Poor blood circulation can result in inaccurate readings.

If your hands are cold or you have poor circulation, warm up your

hands before attempting to obtain a reading.

4. A tourniquet, blood pressure cuff or other blood flow hindrances may

also result in inaccurate readings.

5. Nail polish and/or acrylic nails may also affect the readings. We

reccommend turning your finger on it's side when in use.

6. Your finger must be clean for a proper reading.

7. The fingertip sensor must be clean for a proper reading.

8. If a reading is difficult to obtain, switch to another finger or to the

other hand.

9. There are a number of other conditions which may lead to an

inaccurate reading including but not limited to recent medical tests

that included an injection of dyes, use of arterial catheters, a weak

pulse, low levels of hemoglobin in the blood, low perfusion (the

quality of your pulse), elevated levels of dysfunctional hemoglobin,

the strength and type of light that you are in while using the pulse

oximeter and the existence of transmitters within certain ranges of

the sensor during use.

10.The sensor will not alert you if your readings are out of normal range.

There is no SpO2alarms; it is not for continuous monitoring, as

indicated by the symbol.

11.Explosion hazard: Do not use the sensor in an explosive atmosphere.

1. Clean the device with a soft cloth dampened with isopropyl

alcohol. Do not pour or spray any liquids onto the sensor. Do

not allow any liquid to enter any openings in the device. Allow

the sensor to dry thoroughly before use.

2. The rubber inside of the sensor is composed of medical grade

rubber. It is Latex Free, non-toxic, and not harmful to the skin.

3. The sensor requires no routine calibration or maintenance.

4. Follow local ordinances and recycling instructions regarding

disposal or recycling of the device and device components,

including batteries.

1. Using your nail, easily open the small rubber cover to expose

the micro USB port. Insert the micro USB end (See A) into the

oximeter's charging port

2. Place the USB end (See B) into any

USB power adapter (not included)

or a USB port on your laptop or computer.

3. When charging, the battery icon

on the display will blink. It is fully charged

when the icon stops blinking.

4. The battery can support 2 hours of continuous

use or approximately 400 measurements.

Note: Make sure the power adapter’s output

voltage is DC5V and output current is ≤1000mAh

Warnings: 1. Keep the oximeter away from young children - small items

such as the USB cable are a choking hazard. 2. Please do not take

a measurement when the device is charging.

1. Open the clamp as shown in the picture above. Using your

thumb and pointer, gently squeeze the back end of the

unit. Place one of your fingers into the opening. Your finger

should be inserted fully.

2. The unit will automatically turn on when the unit is opened

and a finger is inserted. It will automatically begin taking a

reading.

Remember to keep your hands still for the reading. Do not

shake your finger during the test. It is recommended that

you do not move your body while taking a reading.

3. The display will automatically show your pulse rate and

oxygen level readings after a few seconds. Note: Your

pulse rate will not stabilize. It will constantly change as

your pulse rate is based on your heart beats.

4. When there is no signal, a low signal is detected, or a

finger is removed, the unit will power off automatically.

1. Search for the ichoiceRelax app in the App store or Google Play

Store. Download the App.

2. Launch the app and fill out the proper fields (You will need a

valid email address).

3. The app will automatically look for a compatible heart rate

sensor within range. You must place the heart rate sensor on

your finger to turn it on. Once connected, the app will load.*

*You cannot access the app without a heart rate sensor. If there

is no signal from the sensor and/or you remove the sensor from

your finger, the app will lock and begin seaching again for a unit

within range.

ichoiceRelax App Features

COACH – Exercises to help guide your breathing with on-screen

pacers driven by your live heart rate readings.

RELAX – Various calming videos with relaxing sounds. Follow the

on-screen pacer driven by your live heart rate readings or close

your eyes and allow the sounds to guide you.

SLEEP - Choose between calming videos with relaxing sounds to

help you fall asleep. Follow the on-screen pacers driven by your

live heart rate readings or close your eyes and allow the sounds to

guide you.

MONITOR - Optional meters help you take readings via the

fingertip sensor and compare the results in charts and graphs.

Filter results by last 7 days, week, month, and year.

3 Minute Baseline Meter - Shows your current relaxation state

and generates an inner balance trend based on your calm vs.

stress readings.

30 Second Spot Check - Easily obtain your heart rate and

oxygen level at any given time.

The ichoiceRelax App uses continuous and accurate heart rate

readings to guide you into a state of relaxation to help reduce your

stress, calm you down and improve health and focus.

The fingertip sensor sends continuous heart rate readings to the

app to help coach and guide you to breathe at your ideal relaxation

breathing rate.

Everyone’s physiology is different and each person will have their

own ideal relaxation breathing rate based on their current mindset.

Your live heart rate readings (obtained by the heart rate sensor) will

help personalize exercises and guide you to breathe at the rate that

is ideal for you to achieve maximum calmness. Our app synchronizes

with your physiology giving you a personalized result.

1. Display: LED display

Low power indication: Battery icon will blink

2. Power Requirement: Lithium battery (250mAh) for power supply

Battery Life: Up to 2 hours (250mAh, 3.7V lithium battery)

Input Voltage: AC100V-240V, Input frequency: 50Hz-60Hz

Output Voltage: DC5V, Output current: 1000mA (Max)

3. Resolution: ±1% for SpO2and ±1 BPM for Pulse Rate

4. Measurement Range: Measuring range for SpO2: 70-100%

Measuring range for PR: 30-250 BPM

5. Measurement Accuracy:

SpO2: 70-100%, ±2 digits; <70%, no definition

PR: 30~99 BPM, ±2 BPM; 100~250 BPM, ±2%

6. Environment Requirement:

Operation Temperature: 41°F~104°F (5°C~40°C)

Storage Temperature: -13°F~158°F (-25°C~70°C )

Ambient Humidity: 15%~93% no condensation in operation;

≤93% no condensation in storage/transport

Atmosphere pressure: 70kPa~106kPa

7. Automatic Power Off: The fingertip sensor will power off automatically

after 8 seconds when the finger is removed.

8. It is recommended that the product be kept in a dry place. A damp

ambient might affect its lifetime and even might damage the product.

9. Declaration: EMC of this product complies with IEC60601-1-2 standard.

The materials which users can come into contact with are non-toxic

and comply with ISO10993-1, ISO10993-5 and ISO10993-10.

Inaccurate measurements may be caused by FACTORS INCLUDING BUT

NOT LIMITED TO:

12.Ethylene oxide sterilizing or immersing the sensors in liquid.

13.Significant levels of dysfunctional hemoglobin (such ascarbonxy-

hemoglobin or methemoglobin).

14.Intravascular dyes such as indocyanine green or methylene blue.

15.SpO2measurements may be adversely affected in the presence of

high ambient light such as direct sunlight. In bright light conditions,

cover the sensor area if necessary.

16.Excessive user movement.

17.High-frequency electrosurgical interference and defibrillators.

18.Venous pulsations.

19.Hypotension, severe vasoconstriction, severe anemia or hypothermia. My display shows

an error message.

My sensor will not

connect to the app

The app reads

"heart rate error"

I cannot navigate

the app

The sensor will not

give a reading.

The readings are

not accurate.

The sensor will not

power on.

Issue Possible Reason

Compliance

Test

Solution

Electromagnetic Environment - Guidance

1. You're wearing fingernail polish and/or

arcylic nails

2. Your hands are too cold / there is not

enough blood flowing to the fingertip

3. The battery on your sensor is low

4. Too much movement

1. The battery are low

2. The pulse oximeter is damaged

1. There is an internal error with your unit

1. You are not in the correct app

2. Your fingertip sensor is off

3. Your finger is not inside the sensor

4. The sensor is having trouble getting a

reading

5. Your sensor is not within Bluetooth range

6. Your phone's bluetooth is off

1. Contact customer service

1. Make sure you downloaded

ichoiceRelax app.

2. Make sure your finger is inside the

sensor and the unit is powered on.

3. Rub your hands together to generate

heat and get blood flowing to your

fingertips.

4. Make sure the unit and phone are

close proximity

5. Turn your phone's bluetooth on

1. Charge the unit

2. Contact customer service

04222019_v5

Guidance and manufacturer’s declaration – electromagnetic emission

RF emissions

CISPR 11 Group 1

Class B

RF emission

CISPR 11

The pulse oximeter uses RF energy only for its internal function.

Therefore, its RF emissions are very low and are not likely to cause

any interference in nearby electronic equipment.

The pulse oximeter is suitable for use in all establishments,

including domestic establishments and those directly connected

to the public low-voltage power supply network that supplies

buildings used for domestic purposes.

The pulse oximeter is intended for use in the electromagnetic environment specified below.

The customer or the user of the pulse oximeter should assure that it is used in such an

environment.

Distributed by:

ChoiceMMed America Corp.

2558 Pearl Buck Rd: Suite 8A

Bristol, PA 19007

Phone: (215) 874-0458

www.ichoicerelax.com

ChoiceMMed America Corp.

1. Keep the fingertip sensor away from young children. Small parts

may be hazardous if swallowed.

Thank you for purchasing the iChoice SMART pulse oximeter +

relaxation coach. With proper use, this system will teach you how to

breathe at your Personal Best Relaxation Breathing Rate to help reduce

stress, calm you down, and improve your health and focus. The fingertip

sensor transmits vital readings in real-time to the free ichoiceRelax app.

Using these live readings, the app will personalize breathing exercises to

help you achieve optimum relaxation.

The smart fingertip sensor can also be used as a pulse oximeter to spot

check your blood oxygen saturation (in % SpO2) and your pulse rate.

The SMART pulse oximeter + relaxation coach is for general wellness

and health applications including sports, fitness, and relaxation

management. It is not intended to be used in prevention, diagnosis, or

treatment of any disease.

Box Contents

1. SMART pulse oximeter + relaxation coach

2. User Manual

3. Carrying Pouch

4. Micro USB Charger

ichoiceRelax App

Phone Compatibility

iOS 12.0 + and Android 5.0+

1. Turn your finger on it's side

2. Rub your hands together to generate

heat and get blood flowing to your

fingertips

3. Charge your unit

4. Make sure your hand is resting and

there is little to no movement

Symbol Symbol

Definition Definition

SpO2%

PR bpm

IP22

Oxygen Level

Pulse Rate (beats per minute)

Serial Number

Protected against dripping

water Follow instructions

for use

Conformity to WEEE

Directive

Type BF applied part

Storage temperature and

relative humidity

Battery Indicator

GENERAL DESCRIPTION

PRECAUTIONS FOR USE

MAINTENANCE

TROUBLE SHOOTINGCONNECTING TO APP (optional)PULSE OXIMETER DISPLAY

GENERAL USE INSTRUCTIONS

CHARGING THE UNIT

TECHNICAL SPECIFICATIONS

WARNINGS

SYMBOL DEFINITIONS

A normal SpO2reading typically ranges from 95%-99%.

A normal at rest Pulse Rate reading ranges between 60-100

beats per minute.

If you have questions regarding your SpO2or Pulse Rate readings

we recommend speaking with your healthcare professional.

Note:

1. The pulse bar indicates the adequacy of Pulse Rate and SpO2.

If the bar shows less than 30%, readings may be inaccurate.

2. If the screen displays the signal strength symbol (?), the unit

is having trouble getting a reading. Keep your hands still and

retry.

OX200 QUICK START GUIDE

1. Place your finger inside the unit

2. Readings appear automatically

after a few seconds

3. Connect to App (Optional)

To obtain full warranty coverage, please be sure to complete your

product registration within 30 days from date of purchase.

If you choose not to register your product, this Limited Warranty

will be void.

You can register your device online at www.ichoicerelax.com/register

When you download the ichoiceRelax app for the first time, you will

be prompted to enter in your personal information. The information

entered here will automatically save to our database and constitute

as your product registry.

Call Customer Service

Monday - Friday

10am - 4:00pm EST

Phone: (215) 874-0458

STATEMENT OF CHOICEMMED AMERICA CORP. / LIMITED WARRANTY

ChoiceMMed America Corp. warrants to the original purchaser

that this equipment will be free from defects in materials and

workmanship for a period of two years from the date of purchase.

This warranty shall be limited to the repair adjustment and/or

replacement at the manufacturer's option of defective parts free of

charge except the cost of transportation to ChoiceMMed America

Corp. Manufacturer's responsibility is limited to actual cost of

item. When returning equipment for warranty service, all shipping

and insurance charges must be prepaid and the proof of purchase

must be enclosed. Returns will only be shipped to locations within

the USA. ChoiceMMed America Corp. will not be responsible for

expenses or inconveniences, or consequential damages occasioned

by equipment or by breach of any expressed or implied warranty

with respect thereto.

Limitations

This warranty covers all defects encountered in normal use of the

equipment and does not apply in the following cases.

1. If the equipment has been serviced by other than a

certified center.

2. Damage to the equipment due to mishandling, abuse, accident

or not following operating instructions.

3. INSTRUMENTS: Warranty does not extend to display face,

batteries, carrying case or charging cable.

For troubleshooting assistance please contact Consumer Support.

Our representatives are trained to provide you assistance over the

phone and may be able to resolve your problem without returning.

For the best possible assistance please have your unit available

when calling us.

www.ichoicerelax.com/help

ChoiceMMed America Corp.

2558 Pearl Buck Rd, Suite 8A, Bristol

PA 19007

1. Search for the ichoiceRelax app

in the App store or Google Play

Store. Download the App to your phone.

ichoiceRelax is compatible with iOs 12.0 and

Android 5.0+

2. Launch the app and fill out the proper fields

(You will need a valid email address).

3. The app will automatically look for a

compatible heart rate sensor within range.

You must place the heart rate sensor on your

finger to turn it on. Once connected, the app

will load.*

*You cannot access the app without a heart rate

sensor. If there is no signal from the sensor

and/or you remove the sensor from your

finger, the app will lock and seach for a unit

within range again.

What is a Pulse Oximeter?

A pulse oximeter is a non-invasive device that

monitors blood oxygen saturation (SpO2) and pulse

rate (heart rate). Pulse oximeters provide an easy

way of assessing your blood oxygen level and

pulse rate.

What is SpO2?

SpO2is also known as oxygen saturation. Oxygen

saturation is a measure of how much oxygen the

blood is carrying as a percentage of the maximum

it could carry.

What is a normal reading?

Pulse Rate - The normal resting range for pulse

rate is typically considered from 60-100 beats per

minute. Ask your health professional this question

as it pertains to you.

Oxygen Saturation - The normal range for SpO2

is typically considered from 95%-99%. The SpO2

measurement may be lower for people who live

at high altitudes. Ask your health professional this

question as it pertains to you.

What kind of conditions may cause an

inaccurate reading?

Cold hands, poor circulation, weak pulse,

movement, fingernail polish and acrylic nails may

cause inaccurate results.

The SpO2is not changing – is it stuck?

Your SpO2reading will not change rapidly like the

pulse rate reading. It may vary by 1%-2%.

The pulse rate is changing rapidly – is it broken?

Your heart rate changes with emotions, excitement

and exercise. It is normal for the readings to

fluctuate.

When do I charge the battery?

The battery indicator on the display will blink when

charging is needed. A stable battery icon indicates

the unit is fully charged.

Warranty Information

Heart Rate

(PR)

Bluetooth

Indicator

Signal

Strength

Battery

Indicator

Pulse Bar

Oxygen Level

(SpO2)

This device omplies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Attention that changes or modification not expressly approved

by the party responsible for compliance could void the user’s

authority to operate the equipment.

Note: This product has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to prodvide

reasonal protection against harmful 41 interference in a

residential installation. This product generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this product does cause harmful interference to

radio communications or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and receiver.

c) Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician for

help.

FCC DECLARATION