iColor 540 User manual

7. Install the Uninet IColor ProRIP (stored on the provided dongle)
• Choose your language and follow the install steps
IColor ProRIP Setup
InstallShield Wizard for IColor ProRIP
The InstallShield Wizard will install IColor ProRIP
on your computer. To Continue, select Next.
IColor ProRIP Setup
License Agreement
Please read the following license agreement
carefully. If you agree, Accept and select Next.
IColor ProRIP Setup
Installation Choices
Choose ‘Full install of iColor ProRIP’ and
select Next.
SetUp
Application Type. Choose either 32-bit or
64-bit application type. To Continue, select
Next.
IColor ProRIP Setup
Choose Destination Location. Select folder
where setup will install files. To Continue,
select Next.
IColor ProRIP Setup
Select Program Folder. Please select a program
folder. Setup will add program icons to the
Program Folder listed below. You may type a new
folder name, or select one from the existing
folders list. Select Next to continue.
IColor ProRIP Setup
Agree to license terms and select Install.
Production Workflow SoftwareProduction Workflow Software
ProRIP
Production Workflow SoftwareProduction Workflow Software
ProRIP
Production Workflow SoftwareProduction Workflow Software
ProRIP
Production Workflow SoftwareProduction Workflow Software
ProRIP
Production Workflow SoftwareProduction Workflow Software
ProRIP
Production Workflow SoftwareProduction Workflow Software
ProRIP
Production Workflow SoftwareProduction Workflow Software
ProRIP
IColor ProRIP Setup IColor ProRIP Setup IColor ProRIP Setup
IColor ProRIP Setup
IColor ProRIP Setup
Please disable/uninstall any Anti Virus software before installation of the UNINET ProRIP
5. Using one of the provided cables (Network or USB), connect the printer to your PC (USB) or router/switch (network).
• To set a static IP address for the printer, please refer to the IColor 540 User Manual.
Quick Start Guide
For detailed instructions, please refer to the Uninet IColor 540 Printer User Manual
and the Uninet IColor® ProRIP User Manual
1. Remove The Packing Materials
And Check the Components
2. Remove Orange Tape
• From all sides
• Then open the top lid
6. The Uninet IColor 540 Digital Color + White Transfer Media Printer Has THREE Configurations To Suit Any Printing Project
These coincide with the ‘Print Queues’ in the iColor ProRIP (Step 14)
3. Remove Orange Security Tape Inside Printer
• If operating in a 110v environment, connect the power transformer.
Ensure the input voltage on the back of the transformer is set to ‘115’ using the red switch
Black
Yellow
Magenta
Cyan
REAR
FRONT
Slot Order (Front to Back)
B. Spot Color Underprinting.
(Typically used for right side
reading applications.)
Yellow
Magenta
Cyan
REAR
FRONT
Slot Order (Front to Back)
White/Clear
White/Clear
Yellow
Magenta
Cyan
REAR
FRONT
Slot Order (Front to Back)
A. Standard CMYK
Uninet IColor
ProRIP dongle
Uninet IColor 540
Insert power cord in the back of
the machine and plug into power.
C. Spot Color Overprinting
(Typically used for reverse
printing applications.)
Digital Color + White Transfer PrinterDigital Color + White Transfer Printer
4. Remove White Cartridge and...
• Remove protective foam from inside the machine and
protective film from the white cartridge and reinstall.

9. ProRIP opens, the Queue Wizard will begin the installation of the support files
for your IColor 540 printer
•Select Next •Select Install Printer
10. Select the IColor 540 printer
from the support menu and
select ‘OK’
11. Device package Search
• Select ‘Search’ for new printer package
• Select ‘Next’ to continue the installation
14. Select the proper Print Queue
for your project
A. Select your ‘Print Que’ and ‘Print Mode’
– The ‘Print Modes’ have preset values for white coverage,
choke, paper size, paper tray and mirror settings
These can be modified as needed
Print Queues
Print Mode
Selection
Note:
Preview icon
should match the
physical cartridge
configuration of
the printer.
15. Import + Print Graphic
A. Three ways to import graphics
– 1. Select the ‘green plus’ icon
and navigating to the
proper folder.
– 2. Select File > Import File
– 3. Simply dragging and dropping your file into the queue
B. Select the desired file
C. Select ‘Print’ icon in
the menu bar.
Uninet IColor 600
8. Uninet IColor ProRIP software
First time Setup
•Ensure the ProRIP dongle
is inserted and you are
connected to the internet
(required)
•Launch the software
•Set unit of measure and
decimal places, then
select OK.
12. Select your ‘Port’ from the menu
• Network or USB (Choose TCP/IP for network)
13. Port Configuration (network)
• If connected via network, once TCP/IP is selected, the software
will poll your network for available printers.
*** Be sure to set a static IP address for your printer so that the IP
addres does not change later. If this occurs, you will need to repeat
this step***
– If you need to change or reset the ports in the future:
Click Queue >> Manage Queues to view, update or change
the port settings.
– If connected via USB, choose the printer
as identified in the drop down menu.