iColor 600 User manual

1. Remove the packing materials
and check the components.
2. Open the front door and top lid of the printer.
4. Install the Uninet IColor Printer Driver.
• Insert the provided USB Flash drive, and select “Uninet IColor Software”
NOTE: Only connect the Printer to the PC when prompted to by the software.
6. Install the Uninet IColor TransferRIP software
A. Insert the dongle into an available USB port.
– The TranferRIP software is located on still the inserted
Uninet IColor Software USB Drive.
B. When prompted, enter the Update Code.
– Your code is in a text file on the UniNet iColor Software USB Drive.
– Please copy and paste the entire string of code.
C. The date below will automatically populate.
D. Then select “Close”.
5. Connect the power cord and USB cable to the printer.
Power on the printer.
www.icolorprint.com
3. Remove orange security tape, protective sheet and packing material from around the printer.
A. Remove the toner and drum cartridges and remove the protective orange tape and protective sheeting from each.
B. Lock the blue lever forward.
C. Reinstall the cartridges.
* Please note the blue handle on the white cartridge is already in the locked position *
• Do Not Remove After Installation
Quick Start Guide
For detailed instructions please refer to the Uninet IColor 600 Printer User Manual
and the Uninet IColor TransferRIP User Manual
Digital Color + White Transfer PrinterDigital Color + White Transfer Printer

Note: There are two options for “Color Mapping”
Note: Recommend using of the MPT Tray
Underprinting White
•Typically used for right side reading
applications such as printing color
on clear or dark medias
Overprinting White/Clear
• Typically used for garment
decoration
9. Load Files
Step 4
A. Select your paper size
B. Select load file
C. Select preview graphic
10. Color Adjustments
Step 4
A. Make any desired color
adjustments to the artwork.
B. Select “Next”.
11. Modify the White Coverage
Step 5
A. Depending on media and
artwork, make adjustments
to the artwork.
B. Select “Next”.
Note: 150% to 250% is
suggested for most
applications.
Use of the “Underfilling” feature is highly recommended.
12. Printing
Step 6
• Adjust settings to
print the artwork
based on the
media being used.
• Select “Print”.
• When prompted,
select the “online”
button on the front
panel of the printer
to print the job.
7. Install the Uninet IColor TransferRIP software
Step 2
• Import the two profiles for white under print or
white/clear over printing
– CMYK
Black Toner
– CMYW
White Toner
– The profiles are
located on the
Uninet IColor
Software
USB Drive
8. Color Mapping
Step 3
A. Choose the desired profile based on the
Black or White cartridge being installed.
B. Select on “Color Mapping”.
C.Choose the desired color mapping option.
– The location of the cartridges in the printer must
match the mapping in the software.
D. Select “Save” and select the desired profile.
Black/White/Clear
Yellow
Magenta
Cyan
REAR
FRONT
Black/White/Clear
Yellow
Magenta
Cyan
REAR
FRONT