Icom MB-96F User manual

• Applicable transceivers
MB-96F is designed for the following Icom
transceivers equipped with MB-68/74/74N;
• IC-F3/S series • IC-F4TR
• IC-F3GT/GS series
• IC-F30GT/GS series
•IC-F41GT/GS MT series
• IC-F11/S series • IC-V8fT3H
(MB-96F will also be compatible with future
transceiver models.)
Supplied item
Hanger ^O
fc0M O
0c
^—9
•Fitting the hanger on your belt
Pass the belt through the leather loop on
the back of the hanger.
Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Thank you for purchasing the loom MB-
96F belt hanger. The MB-96F allows a
transceiver to be attached to your belt
reducing interference during operation.
For your information!
When fitting the hanger using a narrow belt,
the hanger may be easily lifted up with the
transceiver when detaching the transceiv
er.
To reduce this play, fasten with string, wire
etc. through the holes as shown below.
O Attaching the transceiver
Count on us!
A-6306H-1 EX Printed in Japan
© 2003 Icom Inc.