System requirements■
(As of January 2015)
PCD
CPU Clock........... Intel®Core™2 Duo Processor
E6600/2.40 GHz, equivalent or
faster
System memory .. 2 GB or more
Monitor ................ Full HD (1920 x 1080) recom-
mended
At least XGA (1024 x 768)
Sound card.......... For sounding alarms
Speaker............... For sounding alarms
LAN ..................... 100BASE-TX or faster
Other:
USB 1.1 or 2.0
Hard disk ............. At least 1 GB of free space.
NOTE:
DO NOT install more than 2 LAN cards in the PC.
Operating SystemD
Microsoft®Windows® 8.1
Microsoft®Windows® 8
Microsoft®Windows® 7 (SP1 or later)
Microsoft®Windows Vista®(SP2 or later)
•TheIP100FScanbeusedwithboth32and64bitver-
sionsoftheoperatingsystemslistedabove.
•Exceptfor“RT”versionsofMicrosoft®Windows®8.1 or
Microsoft®Windows®8.
USB flash drive and its files■
The USB drive contains the IP100FS and its installer.
•“REMOVABLE” and “CD Drive ICOM” windows appear
when the USB flash drive is attached to the PC.
DO NOT restart or shutdown the PC with the USB
ashdriveattachedtoit.Thismaybethecauseof
data loss and malfunctions. ALWAYS remove the
ashdrivefromthePCbeforerestartingorshutting
down the PC.
PC Standby mode■
Depending on the PC, the software may not operate
properlyafterreturningfromthestandbymode.Ifthis
occurs,turnOFFyourPC’sstandbymode.
Options■
*1 WhenusingwiththeIP100FS,theMONITORswitchis
disabled.
*2 CT-23isnecessarywhenyouconnecttheSM-26and
the PC.
Note on the CT-23:
•The CT-23 audio communication contains a high
pitched tone that most people cannot hear. Howev-
er,ifyoudohearit,lowerthePC’saudiovolume.
•If thebooster,amplierorlteringfunctionis set
in the microphone interface of the PC, deactivate
them.
•Ifthemicrophone’sPTTmalfunctionoccurs,adjust
the microphone recording level properly.
About the firewall setting■
TheIP100FScommunicationmaybeblockedbyyour
rewall.
Inthatcase,aprotocolandportnumberslistedbelow
shouldbeallowedtopasstherewall.
Seeyourrewallinstructionsforthecorrectsettings.
Protocol: UDP
Port number:
SourcePortNumber*→ ServerPortNumber*
SourcePortNumber*← ServerPortNumber*
SourcePortNumber*← Dynamic port
*Refertotheportnumberssetinthesitesettingsof
the IP100FS.
(→ MenuBar>Option>Setting...)
RWARNING! NEVERdisassemble,modifyorrepair
the IP100FS USB flash drive. This may result in an
electricalshock,causeareordamagethedrive.
RWARNING! NEVER operate or touch the IP100FS
USB flash drive with wet hands. This may result in an
electrical shock or damage the drive.
CAUTION: DO NOT place the IP100FS USB flash
drive in direct sunlight.This could damage the IP100FS
drive.
CAUTION:
DO NOT useharshsolventssuchasben-
zine or alcohol to clean the IP100FS USB flash drive,
asthey candamagethe drive’ssurfaces.Ifthe USB
ashdrivebecomesdustyordirty,wipeitcleanwitha
dry, soft cloth.
Always place the IP100FS USB flash drive in a secure
placetoavoidinadvertentusebychildren.
PRECAUTIONS
INSTRUCTIONS
The IP100FS ip a d v a n c e d r a d i o s y s t e m r e m o t e c o m -
m u n i c a t o r allows you to remotely communicate with
WLAN transceivers connected to your IP1000C from
a PC through IP networks.
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
beforeusingtheIP100FS.
SAVE THESE INSTRUCTIONS — These instructions
contain important safety and operating instructions for
the IP100FS.
EXPLICITDEFINITIONS
WORD DEFINITION
RWARNING! Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
ofpersonalinjury,reorelectricshock.
IPADVANCEDRADIOSYSTEM
REMOTECOMMUNICATOR
OPERATIONNOTE
•Ensure that your PC supports USB port(s) operation by
conrmingtheUniversalSerialBuscontrollerisinthePC’s
Device Manager.
•We recommend that you insert the IP100FS USB ash
drive to the PC’s USB port. Connecting it through a hub
may damage the drive or make it work improperly.
•When operating the PC or external devices, see their in-
struction manuals for operational details.
INSTALLATIONNOTE
FCCINFORMATION
CAUTION: Any changes or modifications not expressly ap-
provedbyIcom Inc., could void your authority to operate the
equipment under FCC regulations.
FOR CLASS B UNINTENTIONAL RADIATORS:
Thisequipmenthas beentestedandfoundtocomply with
the limits for a Class B digital device, pursuant to part 15 of
theFCCRules.Theselimitsaredesignedtoprovidereason-
ableprotectionagainstharmfulinterferenceinaresidential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
televisionreception,whichcanbedeterminedbyturningthe
equipment off and on, the user is encouraged to try to correct
theinterferencebyoneormoreofthefollowingmeasures:
•Reorientorrelocatethereceivingantenna.
•Increase the separation between the equipment and re-
ceiver.
•Connecttheequipmentintoanoutletonacircuitdifferent
from that to which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnician
for help.
1.BEFORESTARTINGTHEIP100FS
Follow the instructions and install the IP100FS dispatching software. The IP100FS USB flash drive must
also be inserted into the PC every time you start up the IP100FS dispatching software.
•Tooperatethesoftware,refertotheIP100FSHelple.
•Purchaseaspeaker,headsetoramicrophone(Seeoptionsbelow)tomeetyourneeds.
Thedisplayeddialogueboxes,indicationsoropera-
tions may differ slightly, depending on your system
settings,typeofOSanditsservicepack*level.
* In this leaflet, service pack is written as SP from further
on.
IP100FS
About the IP100FS Help file:
PleaserefertotheHelpleofthesoftwareforassistance
with the functions or settings.
ToopentheHelple,click“Help”intheMenuBarofthe
softwareandselect“Help,”orsimplypushthe[F1] key on
thePC’skeyboard.
HM-152
h a n d m i c r o p h o n e
SM-26*1
d e s k t o p m i c r o p h o n e
CT-23*2
p t t m i c r o p h o n e a d a p t e r
