ICON COBALT Essential User manual

COBALT Essential™Sensor Faucet
Standard Operations 102664
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
ACTIVATION
page 1
Rev 081023
To prevent ooding acvaons will stop aer 30 seconds.
AUTO ACTIVATION
The faucet will automacally acvate based on IR detecon. The IR sensor has 3 LEDs, a red, green, and blue to indicate detecon
and acvaon status.
When no object is detected no LED indicaon will be displayed.
During object detecon the faucet will blink a green LED in 5-second intervals. If the faucet is powered by a plug-in transformer
a solid blue LED will also illuminate.
MANUAL ACTIVATION
Press the acvate buon on the control module, this will toggle the water on and o.
SENTINEL ACTIVATION
Sennel acvaon will automacally acvate the faucet 24 hours aer the last acvaon, by default sennel acvaon is o.
To toggle this feature, hold down the acvate buon for 5 seconds The red LED located in the IR sensor window will stay on
for 3 seconds to indicate it has been turned on, or blink for 3 seconds if it has been turned o.
ACTIVATION REFUSAL
When an acvaon is aempted but the device is in a state of end-of-life baery, obstrucon, or disabled, a red LED will ash,
and the faucet will not acvate.
ALERTS
Alerts are indicated by a red LED ashing every 10 seconds.
OBSTRUCTION
When an object has remained detected for 30 minutes auto acvaons will be disabled. To reset an obstrucon alert, the faucet
must not detect anything for at least 5 seconds.
Acvaons cannot last more than 30 seconds. An obstrucon will not cause your faucet to run connuously.
LOW BATTERY
When the baery voltage has dropped below 6V.
BATTERY END-OF-LIFE
When the baery voltage has dropped below 5V. If the faucet is running only on baery power acvaons will be disabled
and the red LED will ash rapidly.

COBALT Essential™Sensor Faucet
Standard Operations 102664
I-CON Systems, Inc., for product support call 1-866-730-7192 or visit us online at support.i-con.com
One or more products contained herein are protected by U.S. Patent with other undergoing the patent process www.i-con.com/patents
page 2
Rev 081023
AUTO-RANGE
Hold the Auto-Range buon for 3 seconds. A 5-second countdown will occur indicated by a green light ashing every second in the
IR window. While the Auto-Range feature is running the green LED will go solid. Once Auto-Range is nished the green LED will blink
3 mes.
If during Auto-Range no object is detected or there is an error with the Auto-Range process (such as the IR sensor malfunconing)
The value will be set to the default range of 8 inches.