ICP DAS USA DL-300-WF Series User manual

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
1
DL-300-WF Series Quick Start
For DL-301-WF/DL-302-WF/DL-303-WF
Aug 2018, Version 1.00
What’s in the shipping box?
DL-300-WF Logger
Quick Start
Technical Support
User Manual and Utilities
http://ftp.icpdas.com/pub/cd/iiot/dl-300/document/
http://ftp.icpdas.com/pub/cd/iiot/utility/
Product Website
http://www.icpdas.com/root/product/solutions/remote_io/rs-485/dl_s
eries/dl-300-wf.html
E-mail
[email protected]

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
2
The DL-300-WF logger can be powered by either a PoE switch or a
+12 ~ +48 V power supply as below:
+12 ~ +48 VDC
Power Supply
Push In (Solid Wire or Wire with wire-end ferrule)


1
Connecting the Power Supply

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
3
Flexible Wire

Push and Release

Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
4
The factory default settings for Wi-Fi communication of the DL-300-WF
are as follows.
Mode: AP
Wireless Security: WPA/WPA2, "00000000"
DHCP Server (AP Mode): DHCP Server on, start IP: 192.168.255.2
Wi-Fi Channel (AP Mode): 11
IP Address: 192.168.255.1
Gateway Address: 192.168.255.254
Subnet Mask: 255.255.0.0
SSID: DL-301-WF or DL-302-WF or DL-303-WF
Modbus TCP Port: 502
The Wi-Fi IIOT Utility is provided to configure and test the DL-300-WF
module through the Wi-Fi interface. Please refer to chapter 6 of the user
manual for details.
You can also use a browser to configure and test the DL-300-WF
module through the Ethernet interface. Please refer to chapter 4 of the
user manual for details.
2
Powering-on the DL-300-WF logger