ICP DAS USA PIR-23-WF Series User manual

PIR-23x-WF Series Quick Start
1
------------------------
------
---------------------------------------
-
-----
Package Contents
2
------------------------
------
---------------------------------------
-
-----
Wire Connections
May
201
9
Version 1.1.0
Module
Mounting Plate
Quick Start
M4x12 Drywall
Screws x 2
NO: 10 A @ 250 VAC
NC: 6 A @ 250 VAC
220 VAC

3
------------------------
------
----------------------------------
-
----------
Installation

user manual for details.
 User Manual and Utility
http://ftp.icpdas.com/pub/cd/IIoT/PIR-200/document/User
Manual
http://ftp.icpdas.com/pub/cd/IIoT/utility/
 Product Website
http://www.icpdas.com/root/product/solutions/re
mote_io/rs-485/sensor_series/sensor_series_sele
ction.html
 E-mail
[e-mail]
IP : 192.168.255.1
Gateway : 192.168.0.1
Mask : 255.255.0.0
4
---------------------------------------------------------------------------
Technical Support
5
------------------------
------
----------------------------------
-
----------
Factory Default Settings

The factory default settings for Wi-Fi communication of the
PIR-23x-WF Series are as follows.
 Mode: AP
 Wireless Security: WPA/WPA2, "00000000"
 DHCP Server (AP Mode): DHCP Server on, start IP:
192.168.255.2
 Wi-Fi Channel (AP Mode): 11
 IP Address: 192.168.255.1
 Gateway Address: 192.168.255.254
 Subnet Mask: 255.255.0.0
 SSID: PIR-230-WF (PIR-231-WF)
 Modbus TCP Port: 502
The Wi-Fi IIOT Utility is provided to configure and test the PIR-23x-WF
Series module through the Wi-Fi interface. Please refer to chapter 4 of
the user manual for details. You can also use a browser to configure
and test the PIR-23x-WF Series module through the Ethernet interface.
Please refer to chapter 3 of the of the user manual for details.
6
------------------------
------
----------------------------------
-
----------
Powering-on the PIR-23x-WF Series logger