ICP DAS USA PET-7000 Series User manual

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
PET-7000/ET-7000 Quick Start Guide
Congratulations on purchasing PET-7000/ET-7000 - the most popular automation solution for
Ethernet remote monitoring and control application. This Quick Start Guide will provide
information needed to get started with PET-7000/ET-7000. Please also consult the User
Manual for detailed information on the setup and use of
PET-7000/ET-7000.
In addition to this guide, the package includes the following items:
PET-7000/ET-7000 Module Software Utility CD
-PET-7000 / ET-7000 Website
http://www.icpdas-usa.com/remote_ethernet_io_modules.html
-ICP DAS USA Website
http://www.icpdas-usa.com/
Phone : [phone]
Email: [e-mail]
Tech Support: [e-mail]

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
2
PET-7000/ET-7000 Quick Start Guide
1
-----------------------------------------------------------
Configuring Boot Mode
Init mode: For configuration. After booting, ET-7000 will not run the
default firmware and cannot surf the internet. Use this mode to
update MiniOS7 image.
Normal mode: For normal working. After booting, ET-7000 will run the
default firmware and can use all ET-7000 functions.
----------------------------------------------------------------------------------
Connecting to Network, PC and Power
The ET-7000 is equipped with an RJ-45 Ethernet port for connection to an Ethernet
hub/switch and PC.

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
PET-7000/ET-7000 Quick Start Guide
3
4
---------------------------------------------------------------------------------
Installing the MiniOS7 Utility
Step 1: Get the MiniOS7 Utility tool
The MiniSO7 Utility can be obtained from companion CD or our site:
CD:\Napdos\minios7\utility\minios7_utility\
http://www.icpdas-usa.com/minios7utility.html
Step 2: Follow the prompts to complete the installation
After the installation has been completed, there will
be a new short-cut for MiniOS7 Utility on the
desktop.
----------------------------------------------------------------------------------
Using MiniOS7 Utility to Assign a New IP
The ET-7000 are Ethernet devices, which comes with a default IP address, therefore, you
must first assign a new IP address to the ET-7000.
The factory default IP settings are as follows:
Item
Default
IPAddress 192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
4
PET-7000/ET-7000 Quick Start Guide
Step 1: Run the MiniOS7 Utility
Double-click the MiniOS7 Utility
shortcut on your desktop.
Step 2: Press “F12” or choose “Search” from the “Connection” menu
After pressing F12 or choosing Search from Connection menu, the MiniOS7 Scan
dialog will appear, that will display a list of all the MiniOS7 modules on your network.
See the status tip, waiting
for the search to be done.

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
PET-7000/ET-7000 Quick Start Guide
Step 3: Choose the module name and then choose “IP setting” from the toolbar
Choose the module name for fields in the list, and then choose IP setting from the
toolbar.
Step 4: Assign a new IP address and then choose “Set” button
Step 5: Choose “Yes” button
After completing the settings, press the Yes
button in the Confirm dialog box to exit the
procedure.

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
PET-7000/ET-7000 Quick Start Guide
5
6
PET-7000/ET-7000 Quick Start Guide
----------------------------------------------------------------------------------
Enabling Adobe Flash Player in Your Brower
Your browser must support Adobe Flash Player and have it enabled in order to use the
ET-7000 web site.
If you do not have it installed, please go to the following website and install it.
The Adobe Flash Player Download Center:
http://get.adobe.com/flashplayer/
----------------------------------------------------------------------------------
Go to the ET-7000 Web Site to Check out Functions
The ET-7000 contains an advanced web configuration system that provides users with access
ET-7000 applications through a standard web browser.
Step 1: Start ET-7000/PET-7000
Make sure the switch placed in the
“ Normal” position.
Then reboot ET-7000/PET-7000.
Step 2: Open a browser
Please use a standard internet browser to view the ET-7000 webpage, such as Mozilla
Firefox or Internet Explorer…etc.
If you haven’t changed the default IP address of the ET-7000, please refer to “4. Using
MiniOS7 Utility to Assign a New IP” to configure it.

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
7
Step 4: Fill out the User name and Password
After entering the IP address, the login
dialog box will appear and prompt you to
enter your username and password.
The factory default user name and password
are as follows (Case sensitive):
Item Default
User name Admin
Password
Admin
Step 5: Welcome to ET-7000 web site
After logging into the
ET-7000 web site, the
welcome page will
appear.

PET-7000 series Ethernet Remote I/O - QuickStart (May/2020)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
8
PET-7000/ET-7000 Quick Start Guide
Under the Main Menu, expand the Web HMI, and then
select the Web HMI option to check the values of the data
acquisition.