ICP Electronics LCD-Kit02 User manual

LCD-Kit02
VGA Input LCD Kit of
9.4”DSTN color 640x480 Display
©Copyright 2000 by ICP Electronics Inc. All Rights Reserved.
Manual first edition July 17, 2000.
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does not
represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of the
possibility of such damages.
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.

LCD-Kit02 1
Contents
1. Introduction.................................................................................2
1.1 Specifications...........................................................................................3
1.2 What You Have.........................................................................................4
2. Installation..................................................................................5
2.1 LCD-Kit02 Connection Board Layout...................................................6
2.2 Dimension Drawing................................................................................7
3. LCD-Kit02Connectors.............................................................8
3.1 LCD-02 Connector Board Layout.........................................................8
3.1.1 LCD Connector........................................................................................9
4. Appendix .................................................................................12
Unpacking Precautions

LCD-Kit02 2
1
Introduction
Welcome to the LCD-Kit029.4”DSTN color LCD. The LCD-Kit02
is made for the system manufacturers, integrators, or VARs that
want to provide all the performance, quality and reliability.
The LCD-Kit02is designed with 640 x 480 resolution color display
and Low Reflection to present a High Image Quality. With its
compact size (9.4”), LCD-Kit02is also the most suitable solution
for OA Equipment, Display Terminals, and Industrial portable
Workstation LCD monitor.
The LCD-Kit02comes with specifically designed mounting kit for
fast installation.

LCD-Kit02 3
1.1 Kit Specifications :
lSingle Supply Voltage : +12V
lOutline Dimensions: 269.5mm x 209mm x 57.5mm
lPanel Size : 9.4” Diagonal
lActive Area: 191.99mm x 143.98mm
lViewing Area : 196.0mm x 147.0mm
lNumber of Pixels : 640 (W) x 480 (H)
lPixel Format : 1 pixel = R + G + B dots
lPixel Arrangement : R, G, B Vertical Strip
lPixel Pitch : 0.30mm (H) x 0.30mm (V)
lBrightness : 60 cd/m2
lViewing Direction : 6 o’clock (in direction of max. contrast)
lViewing Angle : +/- 45o(H), -10o~ +30o(V)
lContrast Ratio : > 18
lSurface Treatment : Anti-glare and Hard Coat
lBacklight: Cold-cathode fluorescent lamps for sidelighting
lOperating Temperature : 0~50oC
lRS232 I/F Touch Panel (option)

LCD-Kit02 4
1.2 What You Have
In addition to this User's Manual, the LCD-Kit02package includes
the following items:
lLCD-Kit02 User’s Manual
If it is missing or damaged, contact the dealer from whom you pur-
chased the product. Save the shipping materials and carton in case
you want to ship or store the product in the future.

LCD-Kit02 5
2
Installation
This chapter describes how to install the LCD-Kit02and include all
connections description such as jumpers, connectors and
switches setting.The layout of LCD-Kit02connectors are shown
on the next chapter. Also the Unpacking Precautions are shown
on appendix that you should be careful with are described on the
following page.

LCD-Kit02 6
2.1 LCD-Kit02 Connection Layout
9.4" DSTN LCD
CN1
CN2
IV-23100
JP1 CN4CN3CN2
CN7
CN1
CN8
CN6
CN5
LCD-02

LCD-Kit02 7
2.2 LCD-Kit02 Dimension Drawing
25
255
DOWN
208
186
187
209
102.5
29
107
104
UP
O3.5
17
203

LCD-Kit02 8
3
LCD-Kit02Connectors
3.1 LCD-02 Connection Board Layout
CN1
CN8 CN5
CN7 CN6
CN3CN2 CN4
JP1
LCD-02

LCD-Kit02 9
3.1.1 LCD-02 Connector
lJP1 : BACKLIGHT control
1FPVEE
2CONTROL
1
3 3ENABKL
1-2 short : Backlight control using FPVEE
2-3 short : Backlight control using ENBKL ( default )
lCN1: Panel Signal from CPU board (reference)
PIN NO FUNCTION PIN NO FUNCTION
1+12V 23 P14
2+12V 24 P15
3GND 25 P16
4GND 26 P17
5PLCD 27 P18
6PLCD 28 P19
7FPVEE 29 P20
8GND 30 P21
9P0 31 P22
10 P1 32 P23
11 P2 33 GND
12 P3 34 GND
13 P4 35 SHFCLK
14 P5 36 FLM
15 P6 37 M
16 P7 38 LP
17 P8 39 GND
18 P9 40 ENBKL
19 P10 41 GND
20 P11 42 N/C
21 P12 43 PLCD(+5V)
22 P13 44 PLCD(+5V)
□
○
○

LCD-Kit02 10
SHFCLK: Shift Clock. Pixel clock for flat panel data.
FLM: First Line Marker.Flat Panel equivalent of VSYNC.
LP: Latch Pulse(may also be called CL1).
M: M signal for panel AC drive control (may also be called
ACDCLK).
ENABKL: power sequencing control for enabling the backlight
FPVEE:Power sequencing control for panel bias voltage VEE. May
also be configured as ENABKL
lCN2: Panel contrast adjust
1+VEE
2Vcontrast
1
33GND
lCN3 :Power Connector for Backlight inverter
1POWER
2CONTROL
3GND
1
44VR
lCN4 : reserved for touch panel
1+12V
2GND
3GND
1
44VCC
lCN5 : INVERTER POWER SWITCH
1
2
1+12V
□
○
○
□
○
○
○
□
○
○
○
□
○

LCD-Kit02 11
2POWER
Default : 1-2 short
lCN6 : Panel interface channel one
PIN FUNCTION
1FLM
2M
3FPVEE
4LP
5GND
6SHFCLK
7GND
8P11
9P10
10 P9
11 P8
12 P3
13 P2
14 P1
15 P0
lCN7 : Panel interface channel two
PIN FUNCTION
1P15
2P14
3P13
4P12
5P7
6P6
7P5
8P4
9VCC
10 GND
11 GND

LCD-Kit02 12
12 +VEE
13 +VEE
14 VO
lCN8 : Backlight Brightness control for external VR
1VR
1
22GND
Default : 1-2 short
Appendix
Unpacking Precaution
üSome components on LCD-Kit02are very sensitive to static electric
charges and can be damaged by a sudden rush of power. Ground
yourself to remove any static charge before touching your LCD-
Kit02. You can do it by using a grounded wrist strap at all times or
by frequently touching any conducting materials that is connected
to the ground.
üDo not touch the inner side of LCD panel and the connector/cable of
fluorescent lamp/backlight when the power is on. The inverter
supplies HIGH VOLTAGE to these parts (~ 550Vrms).
üDisconnect power supply before handling and doing connection on
LCD-Kit02. Do not plug any connector or jumper while the power is
on. It will cause fatal damage to your LCD panel.
üMake sure that every connector is connected in correct direction.
Any incorrect connection may cause smoke or burn of electrical
parts or fatal damage of your LCD panel.
üBe careful with the liquid crystal material. Do not swallow, inhale or
have skin contact with this material in case that the LCD panel is
broken and the liquid flow out. If you inhale the liquid material, rinse
□
○

LCD-Kit02 13
your mouth immediately with water then go to see a doctor. If you
have skin contact with the liquid, wash it immediately with alcohol.
Be careful, too, with the chips of glass if the panel is broken.
üFor outdoor usage, an ultra-violet ray protect-lens is recommended
to apply onto LCD display. It will prevent your LCD from strong sun-
light, scratches, dust and water invasion etc. which can cause
damage to the LCD display.