
1.1 Specifications :
•CPU : Support Intel 66/100/133MHz FSB CPU ,Celeron®up to 566
MHz , Pentium III ( FC-PGA ) 933 MHz ( or Above ) Processor.
•Bus : PICMG bus, meets PCI 2.1 standard
•DMA channels : 7
•Interrupt levels : 15
•Chipset : VIA Apollo Pro133 chipset 66/100/133MHz HOST Clock
•
RAM : Four 168-pin DIMM sockets support SDRAM and VCM(NEC:
Virtual Channel Module) RAM module, up to 1GB.
•Ultra DMA/66 (Enhanced PCI IDE Interface) : up to four PCI
Enhance IDE hard drives. The Ultra DMA/66 IDE can handle data
transfer up to 66MB/s. The best of all is that this new technology is
compatible with existing ATA-2 IDE specifications. So, there is no
need to do any change for customer’s current accessory.
•Multi-I/O Chip : W83977TF & W83877TF, all I/O setup by BIOS
Four 16C550 RS-232C Ports
One EPP/ECP Parallel Port, Floppy Port
•Floppy disk drive interface : two 2.88 MB, 1.44MB, 1.2MB, 720KB,
or 360KB floppy disk drives.
•Four high speed Serial ports : NS16C550 compatible UARTs
•Bi-directional Parallel Port
•Built-in LM78 Hardware Monitoring System to monitor power
supply voltage and fan speed status.
•IrDA port : Support Serial Infrared(SIR) and Amplitude Shift
Keyed IR(ASKIR) interface.
•USB port : Support two USB ports for future expansion.
•ISAPLUSTM : designed to enhance the ISA bus drive capability
•Watch-dog timer : can be set by PROGRAM period. Reset or NMI is
generated when CPU does not periodically trigger the timer. Your
program uses hex 043/843 and 443 to control the watch-dog and
generate a system reset.
ROCKY-3701 Socket 370 CeleronTM & Pentium III 4