ICRealtime CONSOLE-5X User manual

IC-CONSOLE-5X –User Manual
Contents
Functionality....................................................................................................................................................... 2
Login/Shutdown ................................................................................................................................................. 4
Login:.............................................................................................................................................................. 4
Shut Down: ......................................................................................................Error! Bookmark not defined.
How to use Zones............................................................................................................................................... 5
Configuration: ..................................................................................................Error! Bookmark not defined.
Control point.................................................................................................................................................. 5
Zones (Menu Settings > Zone) ....................................................................................................................... 6
Operation ........................................................................................................................................................... 6
Cable Connection ........................................................................................................................................... 6
Keyboard Setup.............................................................................................................................................. 6
Operation....................................................................................................................................................... 6
Speed Dome Menu (Step) .................................................................................................................................. 8
Iris/Zoom/Focus ............................................................................................................................................. 8
Preset ............................................................................................................................................................. 8
Set Preset ....................................................................................................................................................... 8
Go to preset ................................................................................................................................................... 8
Delete preset ................................................................................................................................................. 8
Scan..................................................................................................................Error! Bookmark not defined.
Pan ...................................................................................................................Error! Bookmark not defined.
Tour ......................................................................................................................Error! Bookmark not defined.
Pattern .............................................................................................................Error! Bookmark not defined.
Playback/Channel Changing ............................................................................................................................... 9
Note ............................................................................................................................................................... 9
Logout ............................................................................................................................................................ 9
Playback ......................................................................................................................................................... 9
Record............................................................................................................................................................ 9
PTZ Control and Video Color........................................................................................................................ 10
Tour.............................................................................................................................................................. 10
Single-Window/Multiple-Window Switching............................................................................................... 10

IC-CONSOLE-5X –User Manual
Functionality
SN
Note
Icon
Button Name
Function
1
General
function
panel
ESC
ESC
Cancel current operation
In playback mode, click this key to go back to
dynamic surveillance mode.
SETUP
Main menu shortcut
button
Go back to main menu.
SHIFT
Change input method
Switch between input methods
ENTER
Confirm button
Confirm current operation
0～9
Character and
numerals
Switch between numeral/characters, click
Shift to switch.
2
DVR
control
panel
ID
ID shortcut
Shortcut key to go to ID zone search
CAM
Device channel
number
Control DVR channel.
MULT
Split button
Control DVR window split
AUX
Auxiliary
Go to video color interface and open DVR local
PTZ interface.
FN
Function key
Work with the number buttons.
【FN】+1: Go to DVR assistant interface.
【FN】+2: Tour
PTZ
PTZ button
Control channel PTZ.
PLAY
Playback button
Control DVR playback
3
Speed
dome
control
panel
IRIS
iris
Control iris.
FOCUS
focus
Control focus
ZOOM
zoom
Control zoom.
OTHER
Speed dome menu
Go to speed dome menu.
PERSET
Preset
Go to preset setup interface.
SCAN
Scan
Go to scan setup interface.
PAN
Pan
Go to pan setup menu.
TOUR
Tour
Go to tour setup menu.
PATTERN
Pattern
Go to pattern setup menu.

IC-CONSOLE-5X –User Manual
SN
Note
Icon
Button Name
Function
4
Joystick
-
-
Aux menu and function operation.
5
Indicator
light
panel
PWR
Power indicator
light
The light is on when the keyboard is properly
connected to the power supplying.
TR/TX
Network data
receive and send
indicator light
The light is flashing when the keyboard is
connected to the network.
NET
Network indicator
light
The light is on when the device is connected to
the network.
232
RS232 indicator
light
The light is flashing when there is 232 data
transmission.
485
RS485 indicator
light
The light is flashing when there is 485 data
transmission.
USB
USB indicator light
The light is on when the keyboard is connected to
the USB device.
6
LCD
-
-
OSD menu

IC-CONSOLE-5X –User Manual
Login
Login:
Connect the keyboard to the power supply. Check to see if the power light is on. You can see the
welcome interface after the device is properly booted up. Click either the ENTER or SETUP button to
go to the following screen:
Select the user you wish to log in as and input the appropriate password. Then click ENTER.
How to change the Username:
You cannot directly go and change the username; instead you must remove a user and re-add them.
How to delete a pre-existing user.
To do this: Login and go to Menu Settings > 3. Account > (3)Del User.
Now highlight the user you wish to modify using left and right on the joystick, and then press ENTER
to confirm deletion.
How to add a new user.
To add the user back in; go to Menu Settings > 3. Account > (2)Add User.
Now input the username in the USER: field.
Input a password in the PW: field - The password MUST contain only numbers.
And repeat the password once again in the OK: field.
Define which group you wish to add the user to using left and right on the joystick, then press ENTER
to confirm adding the user.
To delete an incorrectly input character move the joystick to the left.
To switch between character input; press SHIFT on the keyboard this will switch between
Uppercase letters, Lowercase letters and Numerical characters.
PLEASE NOTE: The 3 default usernames (admin, default, guest) CAN NOT be deleted.
Once you have input the user name and password, the system will take you to the main menu.
The user you wish to log in as can be changed by moving the joystick to the left or right.
Username
Password
admin
888888
default
888888
guest
888888
The admin has full control over the keyboard, with no limitations.
The default cannot add or delete a user, modify user rights or manage rights.
The guest can only operate control points. There are no other rights available to this user.

IC-CONSOLE-5X –User Manual
How to use Zones
Control point
This is used to set control point information. See the image below. All the items listed below
should be set. You can use the ID, device name, COM address or the IP address to search a
device easily in zones.
NOTE: The information which you input here should be unique. Otherwise, the system
cannot save the setup.
ID: Is the device ID number so that you can recognize the device quickly.
Name: Here you can define a customised device name.
Type: Device type. The options for this include: SD/NVS/DVR.
Link: Please select the type and set the corresponding parameters. The options for this
include: NET/RS232/RS485. The interface is shown below.

IC-CONSOLE-5X –User Manual
PLEASE MAKE SURE THE COM TYPE AND THE PARAMETERS YOU SET HERE ARE THE SAME
AS THE ACTUAL SITUATIONS. OTHERWISE, THE KEYBOARD CAN NOT CONTROL THE
DEVICE!
Zones (Menu Settings > Zone)
With this interface, you can quickly search a device via device ID, device name, COM
address, IP and etc. The Keyboard can automatically connect to the device and you can use
the keyboard to control it.
Operation
Cable Connection
Please connect the keyboards A/B line to the speed dome A/B line connection so that the
connection is correct.
Keyboard Setup
a) Ensure that the keyboard A/B line and speed dome A/B line connection is set up
correctly.
b) Set the speed dome address so that the speed dome address and the keyboard RS485
address are the same.
c) Go to the zones interface on the keyboard.
Note: Please select protocol according to the speed dome type. The default setup is DH-
SD.
d) After the setup, click ESC to exit control point control interface. System pops up a
dialogue box you can click ENTER to save data or click ESC to cancel setup.
Operation
On the keyboard, click ID to go to the control point interface to set speed dome ID to connect to
the speed dome.
After successful connection, the interface is shown as below. See the image below.

IC-CONSOLE-5X –User Manual
Step: Defines the movement speed. Input number buttons on the keyboard and then
click ENTER to confirm. The speed ranges from 1 to 8. The step 1 is faster than step 8.
The lens movement supports 8 directions. It includes: up/down/left/right/top left/top
right/bottom left/bottom right. Please use the joystick to control.

IC-CONSOLE-5X –User Manual
Speed Dome Menu (Step)
On the keyboard, click the OTHER button. The interface is shown as below.
Iris/Zoom/Focus
Iris
On the keyboard, use the +and –buttons on the IRIS button, or turn joystick up/down to
control the iris.
Focus
On the keyboard, use the +and –buttons on the FOCUS button, or turn joystick left/right to
control the focus.
Zoom
On the keyboard, use the -1W and T+1 buttons on the ZOOM button, or turn joystick
clockwise or counter clockwise to control the zoom.
Preset
On the keyboard click PRESET, the interface is shown as below.
Set Preset
a) Use joystick to control the PTZ to set the preset position.
b) On the keyboard click the PRESET button, you will be brought to the preset interface.
c) Input the desired preset number and then select set preset, click ENTER to save preset
setup.
Go to preset
Select Preset and then input preset number, click PRESET to go to the corresponding preset
position.
Delete preset
Input the preset number at the preset No. item and then select Delete, click ENTER go
remove it.

IC-CONSOLE-5X –User Manual
Playback/Channel Changing
The DVR local user has the higher priority than then keyboard user. Before you login,
please logout the DVR local menu user, otherwise, you can not use the keyboard to
control the device.
a) Click ENTER on the keyboard, you can go to the menu options interface.
b) Select zones.
c) Input the ID, device name, IP address.RS232, RS485 which you have set on the control
point interface, Click ENTER to begin the search.
The system can automatically connect to the DVR if the search is successful.
If the system pops up with a dialogue box to inform you the address does not exist,
Please check the information and input again.
Note
Click ID on the keyboard and then input ID number. Click ENTER to quickly find the device.
Logout
Click ID on the keyboard and then click ESC to exit.
Playback
When PLAY is pressed on the keyboard; you will be brought to the DVR search interface.
Use the joystick to control the playback buttons and click ENTER to confirm. See the image
below for an example of what this should look like.
Record
On the keyboard, click AUX and 1at the same time，to go to the DVR record control
interface. Use the joystick to set channel number and status. Click ENTER to save current
setup.

IC-CONSOLE-5X –User Manual
PTZ Control and Video Color
On the keyboard, if you press FN followed by 1, you can go to the DVR aux interface. Use the
joystick to select PTZ or video colour set.
If you press the AUX followed by the 2 button, you can directly go to the PTZ control
interface.
Tour
On the keyboard, press FN followed by the 2 button, you can control the tour function of
the DVR.
Note:
This function is only valid when the tour function of the DVR is enabled. You need to go to
the (Setting >Display) to enable tour function.
Single-Window/Multiple-Window Switching
On the keyboard, if you press channel number followed by CAM, you can go to the specified
channel. For example, click number 1 then CAM to go to channel 1.
On the keyboard, press a number followed by MULT, you can enable multiple-channel
display mode. For example, if you press number 4 then MULT, the system goes to 4-
window display mode.