Icron RG2324 User manual

Quick
Start
Guide
12
34
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the Remote Extender to the
AC adapter and plug it into a power
source.
Connect the Local Extender to the
computer using the included USB
cable.
Attach USB device(s) to the Remote
Extender.
Max 500m multimode ber for RG2324
Max 10km singlemode ber for RG2344
1Place extenders where desired and connect
the ber cable to the Link ports (SFP) on the
Local and Remote Extenders.
Remote Extender (back view)
Remote Extender (back view)
Package Contents:
• USB 2.0 RG2324/2344 Local Extender
• USB 2.0 RG2324/2344 Remote Extender
• USB 2.0 Cable
• AC Power Adapter
• Country Specic Power Cord
• Quick Start Guide
Computer
Local Extender (front view)
Local Extender (back view)
USB 2.0 RG2324/
USB 2.0 RG2344
4-Port USB 2.0 Fiber Extender System
Remote Extender (front view)
LinkMode
Config
(LC-LC crossover duplex cable not included)
Link
Mode
Config
24V 1A
LinkMode
Config
Link
Mode
Config
24V 1A
Host
Activity
Link
Power

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, a Maxim Integrated brand, declare under our sole responsibility that the USB 2.0 RG2324/2344, to which this
declaration relates, is in conformity with European Standards EN 55024, EN 55032, EN 61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product. When not in use, product should be
stored in a dry location between -20°C and 70°C.
Certication and Compliance
Icron Technologies Corporation
A Maxim Integrated Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
[phone]
Copyright © 2021 Icron | A Maxim Integrated Brand.
All rights reserved. Information contained herein is
subject to change without notice.