Icron USB 2.0 RG2301N-LAN User manual

USB 2.0 RG2301N,
2301S or 2301GE-LAN
1-Port USB LAN or CAT 5e/6/7
Extender System
Quick
Start
Guide
12
34
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the Remote Extender to the
AC adapter and plug it into a power
source.
Connect the Local Extender to the
computer using the included USB
cable.
Attach USB device to the Remote
Extender.
Max 100m (CAT 5e/6/7 cable not included)
1Place extenders where desired and connect
the CAT 5e/6/7 extension link cabling to the
Link ports (RJ45) on the Local and Remote
Extenders.
Direct Connect
12
34
Connect the Local Extender to the
computer using the included USB
cable.
Place the Remote Extender where desired.
Connect a CAT 5e/6/7 patch cable from
the Link port (RJ45) to a network switch or
wall network port connected to a switch.
Connect the Remote Extender to the AC
adapter and plug it into a power source.
1Place the Local Extender where desired
and connect a CAT 5e/6/7 patch cable from
the Link port (RJ45) to a network switch or
wall network port connected to a switch.
Network Connect
Attach USB device to the Remote
Extender.
Computer
Max 100m between network devices
Max 100m between network devices
Remote Extender (back view)
Remote Extender (back view)
Remote Extender (back view)
Remote Extender (front view)
Local Extender (back view)
Local Extender (front view)
Package Contents:
• USB 2.0 RG2301N/S/GE-LAN Local Extender
• USB 2.0 RG2301N/S/GE-LAN Remote Extender
• USB 2.0 Cable
• AC Power Adapter
• Country Specific Power Cord
• Quick Start Guide
Computer
Local Extender (front view)
Local Extender (back view)
Remote Extender (front view)
Link
Link
Link 5V DC
Link 5V DC
Link 5V DC

FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, declare under our sole responsibility that the USB 2.0 RG2301 Series, to which this declaration relates, is in
conformity with European Standard EN 55022,EN 61000 and EN 55024.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government
guidelines for safe disposal and recycling or contact your national WEEE recycling agency for more information.
Product Operation and Storage
Please read and follow all instructions provided with this product, and operate for intended use only. Do not attempt to open the product
casing as this may cause damage and will void warranty. If a power supply is required for operation, use only the model provided with this
product.When not in use, product should be stored in a dry location between -20°C and 70°C.
Certification and Compliance
Information contained herein is subject to
change without notice. 90-01407-A03
Icron Technologies Corporation
4664 Lougheed Hwy.
Suite 221
Burnaby, BC,
V5C 5T5, Canada
[phone]