ICS Schneider Messtechnik CPG500 User manual

Digital pressure gauge model CPG500 GB
Digitalmanometer Typ CPG500 D
Digital pressure gauge model CPG500

2 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB Operating instructions model CPG500 Page 1 -18
D Betriebsanleitung Typ CPG500 Seite 19 - 34

Contents
WIKA Operating Instruction, Model CPG500 3
14034181.01 01/2013 GB/D
GB
C
C
Co
o
on
n
nt
t
te
e
en
n
nt
t
ts
s
s
1General Information.........................................................................................................4
2Safety ..............................................................................................................................6
2.1 Intended use....................................................................................................................6
2.2 Personnel qualification.....................................................................................................7
2.3 Special hazards...............................................................................................................7
3Specifications ..................................................................................................................8
4Design and Function........................................................................................................9
4.1 Short description / Description .........................................................................................9
4.2 Scope of delivery .............................................................................................................9
4.3 Functions and keys..........................................................................................................9
4.4 Menu functions ..............................................................................................................10
4.5 Connection to the process .............................................................................................10
5Transport, packaging and storage .................................................................................11
5.1 Transport.......................................................................................................................11
5.2 Packaging......................................................................................................................11
5.3 Storage..........................................................................................................................11
6Commissioning, operation .............................................................................................12
6.1 Commissioning ..............................................................................................................12
6.1.1 Changing the batteries...................................................................................................12
6.2 Operating the CPG500 digital pressure gauge ..............................................................13
6.2.1 Turning on (ON).............................................................................................................13
6.2.2 Turn off (OFF) ...............................................................................................................13
6.2.3 Turn on backlight...........................................................................................................13
6.2.4 MIN/MAX indication .......................................................................................................13
6.2.5 Full Scale (FS) indication...............................................................................................14
6.2.6 Erasing the MIN/MAX values.........................................................................................14
6.2.7 OFL Display...................................................................................................................14
6.2.8 Zero point correction (ZERO).........................................................................................14
6.2.9 Resetting the zero point correction ................................................................................15
6.2.10 Automatic power off.......................................................................................................15
6.2.11 Changing the unit ..........................................................................................................15
6.2.12 Filter settings .................................................................................................................16
6.2.13 Display serial number ....................................................................................................16
7Maintenance, cleaning and servicing .............................................................................17
7.1 Maintenance..................................................................................................................17
7.2 Cleaning ........................................................................................................................17
7.3 Recalibration .................................................................................................................17
8Dismounting, return and disposal ..................................................................................18
8.1 Dismounting ..................................................................................................................18
8.2Return ...........................................................................................................................18
8.3 Disposal ........................................................................................................................18

1 General Information
4 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
1 General Information
■The CPG500 digital pressure gauge described in the operating instructions has been
manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
■These operating instructions contain important information on handling the CPG500 digital
pressure gauge. Working safely requires that all safety instructions and work instructions are
observed.
■Observe the relevant local accident prevention regulations and general safety regulations for the
range of use of the CPG500 digital pressure gauge.
■The operating instructions are part of the instrument and must be kept in the immediate vicinity
of the CPG500 digital pressure gauge and readily accessible to skilled personnel at any time.
■Skilled personnel must have carefully read and understood the operating instructions, prior to
beginning any work.
■The manufacturer's liability is void in the case of any damage caused by using the product
contrary to its intended use, non-compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised modifications to the CPG500 digital
pressure gauge.
■The general terms and conditions, contained in the sales documentation, shall apply.
■Subject to technical modifications.
■Factory calibrations/DKD/DAkks calibrations are carried out in accordance with international
standards.

1 General Information
WIKA Operating Instruction, Model CPG500 5
14034181.01 01/2013 GB/D
GB
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation, which can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation, which can result in light
injuries or damage to equipment or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.

2 Safety
6 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
2 Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
CPG500 digital pressure gauge has been selected in terms of measuring range,
design and specific measuring conditions. Serious injuries and/or damage can occur
should these not be observed.
Further important safety instructions can be found in the individual chapters of
these operating instructions.
2.1 Intended use
The CPG500 digital pressure gauge can be used as a calibration instrument and also for any
application which requires accuracy pressure measurement.
The CPG500 digital pressure gauge has been designed and built solely for the intended use
described here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the CPG500 digital pressure gauge outside of its technical
specifications requires the instrument to be shut down immediately and inspected by an authorised
WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from humidity,
impacts, strong magnetic fields, static electricity and extreme temperatures, do not insert any
objects into the instrument or its openings). Plugs and sockets must be protected from
contamination.
If the CPG500 digital pressure gauge is transported from a cold into a warm environment, the
formation of condensation may result in the instrument malfunctioning. Before putting it back into
operation, wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary to the
intended use.

2 Safety
WIKA Operating Instruction, Model CPG500 7
14034181.01 01/2013 GB/D
GB
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to equipment.
The activities described in these operating instructions may only be carried out by
skilled personnel who have the qualifications described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge of
country-specific regulations, current standards and directives, are capable of carrying out the work
described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
2.3 Special hazards
WARNING!
■Use the CPG500 digital pressure gauge only with safe gases and liquids per
directive 67/548/EEC.
■If it is obvious that safe operation of the instrument is no longer possible, the
instrument must be put out of operation and marked in order to secure it against
inadvertent use.
■The measurement signal of the reference (or test sample) can be influenced by
massive electromagnetic irradiation and/or the indication of the signal could be
completely absent.
■If the digital pressure gauge CPG500 is used in applications with oil as a pressure
medium, make sure it will not be used with flammable material or gases directly
afterwards since it can lead to dangerous explosions and danger to personnel
and machinery.
■Digital pressure gauges should only be fitted or remored when the system is free
from pressure.
■Observe the working conditions in accordance with chapter “3. Specifications”.
■Always operate the pressure indicator within its overload limits.

3 Specifications
8 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
3 Specifications

4 Design and Function
WIKA Operating Instruction, Model CPG500 9
14034181.01 01/2013 GB/D
GB
4 Design and Function
4.1 Short description / Description
The CPG500 is a digital pressure gauge featuring a Min/Max display function. Full scale (FS)
accuracy is ± 0.25% based on the upper limit of the measurement range.
Dynamic pressure peaks are measured at a sampling rate of 10 ms (100 measurement
values/second). The MIN/Max memory is continuously updated and rewritten.
4.2 Scope of delivery
■Cross-check scope of delivery with delivery note
■Batteries are installed ex works
4.3 Functions and keys
■4½-digit LCD-Display with backlight
■Displays measurement values and menu functions
Actual value display
Battery status
Bargraph with Peak & Hold Funktion
MIN/MAX or FullScale (FS)
Display Description
Bar graph
Graphic indication of the actual pressure.
A pressure peak is indicated by means of a pixel (graduation mark).
The indicated value is refreshed at intervals of 50 ms (20 measurements/s).
ACT Indicates the actual pressure.
The indicated value is refreshed at intervals of 300 ms (3 times/s).
MIN/MAX Indicates the MIN, MAX or FS value according to setting.
The indicated value is refreshed at intervals of 300 ms (3 times/s).
FS Upper limit of the scale (e.g. 700 bar).
Units Indicates the chosen unit.
Battery Indicates the battery status (5 segments).

4 Design and Function
10 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
Key
Description
Turns the device on / off.
Press for 2 seconds. Turns on the backlight (stays on for 20 seconds).
Selects display unit: MIN, MAX or FS Minimum value Pressure peak
Displays the upper limit of the scale (e.g. 700 bar)
Press for 2 seconds. Changes the unit.
Auto Power Off – on/off. Zero point calibration.
Erases MIN and MAX values from the memory.
Confirms the MENU functions.
4.4 Menu functions
The following settings can be made in the MENU function:
■Auto Power Off – on or off
■Unit selection (bar, PSI, kPa, MPa)
Press the MENU key for 2 seconds to activate the functions menu. Press the MENU key again to
select the next function.
Press the OK key to save the function setting.
The device then switches to the display mode.
4.5 Connection to the process
The CPG500 digital pressure gauge is available with male thread G1/4 or G1/2 for the
corresponding versions.
When fitting the CPG500 digital pressure gauge do not exceed the specified
torques.
Pressure connection
Torque
G ¼
25 Nm
G ½
25 Nm
When fitting directly, ensure that the case of the CPG500 digital pressure gauge can
be rotated freely.

5 Transport, packaging and storage
WIKA Operating Instruction, Model CPG500 11
14034181.01 01/2013 GB/D
GB
5 Transport, packaging and storage
5.1 Transport
Check the CPG500 digital pressure gauge for any damage that may have been caused by
transport. Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
■Storage temperature: -20…+60 °C
■Humidity: <85 % relative humidity (non-condensing)
Avoid exposure to the following factors:
■Direct sunlight or proximity to hot objects
■Mechanical vibration, mechanical shock (putting it down hard)
■Soot, vapour, dust and corrosive gases
■Potentially explosive environments, flammable atmospheres
Store the CPG500 digital pressure gauge in its original packaging in a location that fulfills the
conditions listed above. If the original packaging is not available, pack and store the CPG500
digital pressure gauge as described below:
1. Wrap the CPG500 digital pressure gauge in an antistatic plastic film.
2. Place the CPG500 digital pressure gauge, along with shock-absorbent material, in the
packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag, containing a
desiccant, inside the packaging.
WARNING!
Before storing the digital pressure gauge (following operation),
remove any residual media. This is of particular importance if the medium
is hazardous to health, e.g. caustic, toxic, carcinogenic, radioactive, etc.

6 Commissioning, operation
12 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
6 Commissioning, operation
6.1 Commissioning
The CPG500 digital pressure gauge is supplied with batteries fitted. The device is operational as
soon as it is turned on.
6.1.1 Changing the batteries
CAUTION!
Turn off the device before replacing the batteries.
Open the battery compartment. Insert the new batteries as
depicted.
Ensure correct polarity of the batteries. Batteries: 2 x 1.5 V
(LR6 - AA)
When in continuous operation (without light), the battery life is approx.
1,500 hours.
A battery symbol permanently displays the actual battery status

6 Commissioning, operation
WIKA Operating Instruction, Model CPG500 13
14034181.01 01/2013 GB/D
GB
6.2 Operating the CPG500 digital pressure gauge
6.2.1 Turning on (ON)
6.2.2 Turn off (OFF)
Press once (briefly)
6.2.3 Turn on backlight
Press for 2 seconds. The backlight is shut off automatically after 20 seconds.
6.2.4 MIN/MAX indication
Use this key to toggle the required value.
The key function is sequential; the values are indicated in the display in sequence.
The MIN/MAX function is used to measure pressure peaks. The respective lowest (MIN) and
highest (MAX) measured values are stored in the MIN/MAX memory. Values in the MIN/MAX
memory are erased when the device is turned off. If different pressure tests are to be carried out in
succession, the MIN/MAX memory must be erased after each measurement.
MIN/MAX-value is indicated in the display.
A self-test procedure is carried out
The measuring range is indicated (FS)
Auto Power Off function is active.
Power off activates automatically after
5 minutes. This function can be
altered in MENU.
Display mode:
ACT value displayed

6 Commissioning, operation
14 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
6.2.5 Full Scale (FS) indication
Displaying the upper limit of the scale (FS) is designed to increase readability of the bar graph
indication.
The upper limit of the measurement range is indicated numerically. FS is indicated in sequence
after MIN and MAX.
FS is displayed.
6.2.6 Erasing the MIN/MAX values
Erases MIN/MAX values.
6.2.7 OFL Display
This indicates that the applied pressure is outside of the full scale range.
If the message will remain displayed while the CPG500 is pressure less, please
contact WIKA.
6.2.8 Zero point correction (ZERO)
The zero point can be corrected manually if undesired deviations occur when no system pressure
is being applied (atmospheric pressure).
CAUTION!
The zero point correction sets the current ACT value to zero. In order to exclude faulty
measurements, ensure no system pressure is being applied when carrying out this
function.
This initiates the zero point correction. The ACT (actual) value is indicated in the display as 0.0 bar.
The correction remains active until the device is turned off.
OFL/ZEro is displayed for 3 seconds if the measured pressure (0 bar) is greater
than 5% of the measurement range.
Zero point correction cannot be carried out. Please ensure that no system
pressure is being applied.

6 Commissioning, operation
WIKA Operating Instruction, Model CPG500 15
14034181.01 01/2013 GB/D
GB
6.2.9 Resetting the zero point correction
Turn off the device. Zero point correction is no longer active when the device is turned off
and on again.
6.2.10 Automatic power off
Press for 2 seconds.
Depending on the device configuration, two different displays are possible:
Auto Power Off
Continuous operations
PO On
Press Auto Power Off
is activated after 5 minutes.
PO OFF
Press The device must
be turned off manually.
The settings Auto Power Off or Continuous operations remain stored and are active
when the device is turned off and on again.
6.2.11 Changing the unit
Press for 2 seconds.
Press
Press once (briefly)
The next unit is indicated
Confirm unit selection.
or

6 Commissioning, operation
16 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
6.2.12 Filter settings
Press for 2 seconds.
Press
Press
Press once (briefly)
Filter selection is indicated.
(Filter 0 no damping, Filter 3 max. damping)
Confirm filter configuration.
6.2.13 Display serial number
Press
Display of serial number (1. line).
Display of software version (2. line).
Press
or

7 Maintenance, cleaning and servicing
WIKA Operating Instruction, Model CPG500 17
14034181.01 01/2013 GB/D
GB
7 Maintenance, cleaning and servicing
7.1 Maintenance
This CPG500 digital pressure gauge is maintenance-free.
Repairs must only be carried out by the manufacturer. Except for battery replacement.
7.2 Cleaning
CAUTION!
■Before cleaning, correctly disconnect the CPG500 digital pressure gauge from
the pressure supply, and switch it off.
■Clean the CPG500 digital pressure gauge with a moist cloth.
■Wash or clean the dismounted CPG500 digital pressure gauge before returning it,
in order to protect staff and the environment from exposure to residual media.
■Residual media in dismounted CPG500 digital pressure gauge can result in a risk
to persons, the environment and equipment. Take sufficient precautionary
measures.
For information on returning the CPG500 digital pressure gauge see chapter "8.2
Return".
7.3 Recalibration
DKD certificate - Certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with time
intervals of approx. 12 months. Every factory recalibration includes, additionally, an extensive free-
of-charge check of all system parameters with respect to their compliance with the specification.
The basic settings will be corrected if necessary.

8 Dismounting, return and disposal
18 WIKA Operating Instruction, Model CPG500
14034181.01 01/2013 GB/D
GB
8 Dismounting, return and disposal
WARNING!
Residual media in dismounted digital pressure gauge can result in a risk to persons,
the environment and equipment. Take sufficient precautionary measures.
8.1 Dismounting
Only disconnect test- and calibration installations once the system has been depressurised!
8.2 Return
WARNING!
Strictly observe when shipping the CPG500 digital pressure gauge:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.).
When returning the digital pressure gauge, use the original packaging or a suitable transport
package.
To avoid damage:
1. Wrap the CPG500 digital pressure gauge in an antistatic plastic film.
2. Place the CPG500 digital pressure gauge, along with the shock-absorbent material, in the
packaging. Place shock-absorbent material evenly on all sides of the shipping box.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
Enclose the completed return form with the CPG500 digital pressure gauge.
The return form is available on the internet:
www.wika.de / Service / Return
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compatible way
and in accordance with the country-specific waste disposal regulations.

Inhalt
WIKA Betriebsanleitung, Typ CPG500 19
14034181.01 01/2013 GB/D
D
I
I
In
n
nh
h
ha
a
al
l
lt
t
t
1Allgemeine Informationen ..............................................................................................20
2Sicherheit ......................................................................................................................22
2.1 Bestimmungsgemäße Verwendung ...............................................................................22
2.2 Personalqualifikation .....................................................................................................23
2.3 Besondere Gefahren .....................................................................................................23
3Technische Daten..........................................................................................................24
4Aufbau und Funktion .....................................................................................................25
4.1 Kurzbeschreibung / Beschreibung .................................................................................25
4.2 Lieferumfang .................................................................................................................25
4.3 Funktionen und Tasten..................................................................................................25
4.4 Menü-Funktionen...........................................................................................................26
4.5 Anschluss an die Hydraulik............................................................................................26
5Transport, Verpackung und Lagerung ...........................................................................27
5.1 Transport.......................................................................................................................27
5.2 Verpackung ...................................................................................................................27
5.3 Lagerung .......................................................................................................................27
6Inbetriebnahme, Betrieb ................................................................................................28
6.1 Inbetriebnahme..............................................................................................................28
6.1.1 Batteriewechsel .............................................................................................................28
6.2 Bedienung des CPG500................................................................................................29
6.2.1 Einschalten (ON) ...........................................................................................................29
6.2.2 Ausschalten (OFF) ........................................................................................................29
6.2.3Beleuchtung einschalten................................................................................................29
6.2.4 MIN/MAX-Anzeige .........................................................................................................29
6.2.5 FS Full Scale Anzeige ...................................................................................................30
6.2.6 Löschen der MIN/MAX Werte ........................................................................................30
6.2.7 OFL Display...................................................................................................................30
6.2.8 Nullpunktkorrektur (ZERO) ............................................................................................30
6.2.9 Zurücksetzen der Nullpunktkorrektur .............................................................................31
6.2.10 Automatische Abschaltung ............................................................................................31
6.2.11 Verändern der Einheiten................................................................................................31
6.2.12 Verändern der Filtereinstellungen (Dämpfung) ..............................................................32
6.2.13 Anzeige der Seriennummer ...........................................................................................32
7Wartung, Reinigung und Service ...................................................................................33
7.1 Wartung.........................................................................................................................33
7.2 Reinigung ......................................................................................................................33
7.3 Rekalibrierung ...............................................................................................................33
8Demontage, Rücksendung und Entsorgung ..................................................................34
8.1 Demontage....................................................................................................................34
8.2 Rücksendung ................................................................................................................34
8.3 Entsorgung ....................................................................................................................34

1 Allgemeine Informationen
20 WIKA Betriebsanleitung, Typ CPG500
14034181.01 01/2013 GB/D
D
1 Allgemeine Informationen
■Das in der Betriebsanleitung beschriebene Digitalmanometer CPG500 wird nach
den neuesten Erkenntnissen gefertigt.
Alle Komponenten unterliegen während der Fertigung strengen Qualitäts- und Umweltkriterien.
Unsere Managementsysteme sind nach ISO 9001 und ISO 14001 zertifiziert.
■Diese Betriebsanleitung gibt wichtige Hinweise zum Umgang mit dem Digitalmanometer
CPG500. Voraussetzung für sicheres Arbeiten ist die Einhaltung aller angegebenen
Sicherheitshinweise und Handlungsanweisungen.
■Die für den Einsatzbereich des Digitalmanometer CPG500 geltenden örtlichen
Unfallverhütungsvorschriften und allgemeinen Sicherheitsbestimmungen einhalten.
■Die Betriebsanleitung istProduktbestandteil und muss in unmittelbarer Nähe des
Digitalmanometer CPG500 für das Fachpersonal jederzeit zugänglich aufbewahrt werden.
■Das Fachpersonal muss die Betriebsanleitung vor Beginn aller Arbeiten sorgfältig durchgelesen
und verstanden haben.
■Die Haftung des Herstellers erlischt bei Schäden durch bestimmungswidrige Verwendung,
Nichtbeachten dieser Betriebsanleitung, Einsatz ungenügend qualifizierten Fachpersonals sowie
eigenmächtiger Veränderung am Digitalmanometer CPG500.
■Es gelten die allgemeinen Geschäftsbedingungen in den Verkaufsunterlagen.
■Technische Änderungen vorbehalten.
■Werkskalibrierungen/DKD/DAkkS-Kalibrierungen erfolgen nach internationalen Normen.