ICS Schneider Messtechnik DN 40l DN65 User manual

MOP_MES_01343_EN_D - 07/12/2016
User Manuel
Electronic flowmeter
Version V3.0.4
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
2
DESIGNATION DESCRIPTION
Product Type E ectronic F owmeter
Product
E ectronic F owmeter 2015 Version V3.0.4
DN 40
DN65
DN80
DN 100
DN150
Product Reference (concerned in this manua )
Ref. 32972, 32973, 32974, 32975, 33791
Ref. 32974 used for a visua s
Documentation Ref. MOP_MES_01343_EN
Language Eng ish
Creation Date 01/07/2015
Modification Date 07/12/2016
Revision tracking
Rev. A – 01/07/2015:
- Origina Fi e
Rev. B – 05/01/2016:
- Use changes
Rev. C – 06/04/2016:
- Characteristics changes
Rev. D - 07/12/2016 :
- Change ‘‘charging the battery’’ process and new
‘‘ON/OFF’’ function for wired connection
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

3
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
1 • NOTE ....................................................................................................................4
2 • GENERAL WARNING .............................................................................................4
3 • SECURITY ............................................................................................................4
3.1 - GENERAL INSTRUCTIONS ...............................................................................4
3.2 - USE .............................................................................................................5
3.3 - LIMITS OF USE .............................................................................................5
3.4 - SPARE PARTS ...............................................................................................5
3.5 - SAFETY ELEMENTS ........................................................................................5
4 • RESPONSABILITY ................................................................................................5
5 • WARRANTY ..........................................................................................................6
6 • HANDLING / TRANSPORT / STORAGE ..................................................................6
6.1 - GENERAL INFORMATION ................................................................................6
6.2 - DELIVERY INFORMATION ................................................................................6
6.3 - SHIPMENT OF EQUIPMENT .............................................................................6
6.4 - STORAGE OF EQUIPMENT ...............................................................................6
7 • THE ELECTRONIC FLOWMETER: THE IDEAL CHOICE OF THE MAR ET ....................7
8 • STRENGTHS .........................................................................................................7
9 • OPTIONS AND TYPES ...........................................................................................8
10 • MEASURING PRINCIPLE .....................................................................................8
10.1 - FLOW MEASUREMENT ..................................................................................8
10.2 - PRESSURE MEASUREMENT ............................................................................8
11 • TECHNICAL SPECIFICATIONS .............................................................................9
11.1 - MEASUREMENT SYSTEM ...............................................................................9
11.2 - CHARACTERISTICS ......................................................................................9
11.3 - MEASURING ACCURACY .............................................................................11
11.4 - CONDITIONS OF USE .................................................................................11
11.5 - CONNECTION OUTLETS ..............................................................................12
12 • DIMENSIONS ...................................................................................................13
12.1 - FLOWMETER .............................................................................................13
12.2 - STABILIZING LEGS MADE IN ALUMINIUM ALLOY ............................................14
12.3 - STABILIZING LEGS MADE IN PLASTIC ..........................................................14
13 • PREFACE ..........................................................................................................15
14 • FOLD/UNFOLD .................................................................................................15
15 • FUNCTIONS OF THE FLOWMETER ....................................................................16
15.1 - POWERING ON ..........................................................................................16
15.2 - POWERING OFF .........................................................................................16
15.3 - TO START USE ..........................................................................................17
15.4 - CHANGING THE DISPLAY ............................................................................18
15.5 - RESETTING THE SAMPLE NUMBER TO ZERO ..................................................19
15.6 - RESETTING THE VOLUME TO ZERO ..............................................................19
15.7 - BATTERY SAVER ........................................................................................19
15.8 - BLUETOOTH® OR SERIAL CONNECTION ACTIVATION .....................................20
15.9 - LOW BATTERY .........................................................................................20
15.10 - CHARGING THE BATTERY .........................................................................21
15.11 - USING THE CHARGER AS A EXTERNAL POWER SUPPLY .................................21
15.12 - BLUETOOTH® INDICATOR ........................................................................21
15.13 - CONNECTING TO A HOST..........................................................................22
15.14 - APPLICATIONS FOR A SMART PHONE ..........................................................22
16 • USE OF SOFTWARE TERMITE ............................................................................23
16.1 - INSTALLATION OF TERMITE .......................................................................23
16.2 - WIRED CONNECTION .................................................................................24
16.3 - SETUP SOFTWARE TERMITE ........................................................................24
17 • SPECIFICATIONS FOR INSTALLATION ..............................................................27
18 • CARE AND MAINTENANCE OF THE DEVICE ........................................................29
18.1 - SAFETY INSTRUCTIONS ..............................................................................29
18.2 - GENERAL PREVENTIVE MAINTENANCE .........................................................29
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
4
1 • Note
POK SAS reserves the right to change or modify the specifications of its products at any time to incorporate
the atest techno ogica and regu atory deve opments. The information contained in this document is thus
subject to change without notice.
2 • General warning
Please read the information contained in this operating manual before using the
equipment. The use, maintenance, or any other operation of the equipment, must
be carried out exclusively by personnel informed of safety rules and trained in the
use of this material.
The non-compliance of safety instructions can be dangerous and cause serious
bodily harm and/or property damage. PO SAS cannot be held liable for any
incidents that occur during the use if the instructions and safety (specific to the
area of operation and equipment) are not respected and/or followed.
3 • Security
This symbo indicates important safety tips. Pay carefu attention to prevent serious bodi y
harm and/or property damage.
This symbo indicates instructions that must be observed to ensure smooth operation of the
device. P ease a ways make sure to fo ow a the necessary precautions.
This symbo indicates usefu information to know and understand the correct operation of
the device.
3.1 - General instructions
The device shou d be hand ed by trained professiona s who have read the operating instructions, given
in this manua , prior to use. The device shou d never be hand ed by peop e suffering from ack of sight,
hearing, and i ness or under the inf uence of a coho or drugs, ega prescriptions or over-the-counter drugs.
Be ow you wi find information to work safe y, which must be fo owed when using the device.
• The device must be used in accordance with the conditions written and provided by POK in the present
user manua .
• A ways check, before each use, the genera condition of the device is in working condition.
• Make sure the battery power is fu y charged.
• Any use not adhering to the requirements of the technica instructions cou d ead to risks of damage to
persons, property or the environment.
• Any contact with ive parts (under vo tage) may cause death.
• In case of damage ike y to affect the housing (IP protection) of the device must be stopped.
• Transformations and changes to the device are strict y prohibited.
• Avoid e ectrostatic charging on p astic units and cab es.
• Do not c ean the unit with a damp c oth. In princip e, a friction with non-conductive materia s shou d be
avoided.
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

5
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
• Property damage and/or bodi y harm are important to remember in these cases:
- Unauthorized remova of protective e ements
- Improper use or hazardous materia situations
- Insufficient maintenance
- Never put anything, in particu ar meta , inside the meter.
- Avoid using the meter near app iances generating strong magnetic fie ds
- Avoid dust deposits on the meter
- Adhere to the safety ru es that app y to your faci ity / environment before using the device. It
emits permanent y when it is connected to a remote device.
3.2 - Use
The correct use of the device is mandatory and POK assumes comp iance with the conditions of service and
maintenance of the equipment.
P ease respect the technica imits of the equipment.
The product shou d not be used if a component is damaged or missing.
The recommended pressure of use is 7 BAR. The efficiency of the equipment outside of
this range is not guaranteed. The non-comp iance of safety instructions and a use of the
equipment beyond the recommended pressures can be dangerous and cause serious bodi y
harm or even death.
3.3 - Limits of use
POK guarantees the equipment to operate at the maximum working pressure of PN16. Except
exp icit agreement in writing, our warranty does not cover the uses exceeding this pressure.
3.4 - Spare parts
For spare parts, on y use parts and accessories from POK direct y.
3.5 - Safety elements
It is prohibited to make the safety e ements inoperative, to modify or use in a manner contrary to their
purpose.
4 • Responsability
POK is not responsib e for any damage caused by its equipment (and a accessories) resu ting from improper
use or by unqua ified or untrained staff. Any c aims from third parties are a so exc uded.
Whether the prob em is mechanica , e ectrica , or the software, POK wi not be he d responsib e for the
consequences of any changes made (in particu ar - changes in characteristics or changes made by the user)
without the written agreement of POK.
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
6
5 • Warranty
• Without prejudice to the ega guarantee which app ies in any case, POK offers a one year guarantee (from
the date of shipment to customer) on the who e package of equipment (the device, battery charger and
accessories) with the exception of worn parts, against a defects in design, construction, manufacturing and
against any abnorma wear, provided, however, to have used the hardware in accordance with the present
technica instructions.
• If damage occurs whi e attempting to troub eshoot, modify or change parts and has not been authorized
by POK without it’s prior written consent, the guarantee wi not be uphe d.
• The POK guarantee exc udes a damage caused by fo owing:
- Misuse or non-comp iance in accordance with standard practice
- A wiring error
- Neg igence
- Lack of maintenance
- Mishand ing
- Improper storage
- Use in po uted areas (chemica , e ectrochemica , aggressive vapors, etc.)
• Maintenance and repair of POK products can on y be comp eted by a specia ized qua ified and trained
professiona according to POK.
• POK cannot in any case bare the consequences of direct or indirect oss suffered by the customer in case
of fai ure of its equipment. The responsibi ity for POK is strict y imited to its supp ies and wi in no case give
rise to compensation for damages.
• Repair or modification of the device during the warranty period cannot have the effect of extending that
period.
• Packaging costs, packing supp ies, shipping/transportation and insurance of the device to POK during a
return service, during the warranty period, remains the customers responsibi ity.
• POK warranty inc udes repair (parts and abor) or rep acement of defective parts after technica expertise.
The p ace where the warranty verification is certified is at the POK factory current y ocated in Nogent-sur-
Seine, France.
• In case of any disputes or disputes re ating to a provision or to its ru es, the Tribuna of Commerce in
TROYES has exc usive jurisdiction, even in cases of appea or p ura ities of the defendants.
6 • Handling / transport / storage
6.1 - General information
When unpacking the equipment after transport, check that there is no mechanica damage and/or oose
parts in the interior of the package. In case of damage, the carrier must be informed immediate y. In this
case, do not put the equipment into use.
6.2 - Delivery information
POK equipment is de ivered in a doub e-wa ed cardboard box. The package is secure y c osed with adhesive
tape. A de ivery note is inc uded with the equipment.
6.3 - Shipment of equipment
In case of reshipping the equipment or transferring the shipment to other sites, the shipping process above
sha be fo owed.
6.4 - Storage of equipment
When storing the device, it is recommended to keep it in its origina packaging to protect from humidity,
dust and kept at norma room temperature.
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

7
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
7 • The electronic flowmeter: the ideal choice of the market
The e ectronic f owmeter POK V3.0.4 is the idea choice for measuring the f ow and pressure of water in
mu tip e app ications.
Existing in various diameters (from DN40 to DN150) this f owmeter can measure f ow rates from 20 Lpm to
10,000 Lpm and pressures up to 16 BAR.
Featuring advanced e ectronic techno ogy; the meter has specific functions such as:
• Battery Saver: disp ay can be turned off without interrupting the measurement
• Integrated high-capacity battery life: Over 8 hours of continuous use
• Battery Charger with slow charge: to extend the ife span of the battery
• Recharge the battery using a standard AC outlet
• Recharge the battery using a cigarette lighter (12V/24V): Optiona
• RS485 Output: transfer measurements to a remote computer using a wired connection (up to 500
meters distance)
• Connect via Bluetooth®* to a computer, tab et or mobi e phone to disp ay remote measurements
• ON / OFF button: to avoid se f-discharge of the battery during storage
• Simple battery charge level indicator
• Easy and intuitive recalibration function
• 2.8” Large display on TFT color graphic display:
- Disp ay of f ow rate in pm - Liters per minute or gpm - Ga ons per minute (defau t setting)
- Disp ay of f ow rate in m3/h (cubic meters per hour)
- Pressure disp ay in BAR or PSI (defau t setting)
- Disp aying the cumu ative vo ume (with the possibi ity of resetting)
• User-friendly menus
• Flow and economic pressure measurement for a wide range of operating conditions whi e ensuring a
certain degree of precision
• Stabilizing legs for f oor insta ation
*B uetooth® is a registered trademark of the B uetooth SIG consortium.
8 • Strengths
• Mu tip e Connections: Cab e, B uetooth
• Intuitive contro s via push button
• Exce ent Price / performance ratio
• Wide measuring range
• Abi ity to change the disp ay anguage (factory setting)
• Can be reca ibrated
• Robust housing
• Very itt e maintenance
• Bui t-in charger
• Asymmetrica coup ing possib e
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
8
9 • Options and types
Avai ab e in different sizes depending on the f ow to be measured:
Charger for cigarette ighter 12V / 24V - 1.2A ( 009290 )
Data transfer cab e, 5 m in ength with RS485 / RS232 converter (009291)
10 • Measuring principle
10.1 - Flow measurement
The device uses the simp e princip e of measurement, using a spinning prope er on a horizonta axis. The
rotation of the prope er generates pu ses that are detected and measured by the e ectronic device.
The rotationa speed is proportiona to the f ow ve ocity of the f uid.
10.2 - Pressure measurement
The pressure measurement is ca cu ated by means of a sensor using the proven ceramic ce techno ogy. The
ce signa is amp ified and converted to an ana og vo tage used by the e ectronic device.
DIAMETER FLOW MEASUREMENT PRESSURE REFERENCE
DN40 20 pm to 1500 pm 0 to 16 bar 32972
DN65 300 pm to 3500 pm 0 to 16 bar 32973
DN80 500 pm to 5000 pm 0 to 16 bar 32974
DN100 750 pm to 10000 pm 0 to 16 bar 32975
DN150 2000 pm to 25000 pm 0 to 16 bar 33761
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

9
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
11 • Technical specifications
11.1 - Measurement system
11.2 - Characteristics
Measuring princip e F ow Rate: Prope er
Pressure: Ceramic ce
Primary functions Measuring f ow rate and water pressure
MEASUREMENT RANGE
Pressure from 0 to 16 bar
F ow rate:
from 20 pm to 20000 pm
• DN40 : 20 pm to 1500 pm
• DN65 : 300 pm to 3500 pm
• DN80 : 500 pm to 5000 pm
• DN100 : 750 pm to 10000 pm
• DN150 : 2000 pm to 25000 pm
REFERENCES
DN40 32972
DN65 32973
DN80 32974
DN100 32975
DN150 33761
COUPLINGS
Adaptab e to a types of coup ings, specify your preference when ordering (see POK cata og).
DIMENSIONS
See dimensiona drawings § 12.1, 12.2 et 12.3
WEIGHT
See dimensiona drawings § 12.1, 12.2 et 12.3
MATERIAL
F owmeter housing G ass fi ed composite materia
Body A uminum a oy with hard anodized surface treatment
F ow sensor De rin (high y-crysta ine po ymer)
Pressure measurement Coup ing: stain ess stee
Membrane: Ceramic A 203
Stabi izing egs A uminum a oy with hard anodized surface treatment
Screws and nuts Stain ess stee
OPTIONS
Charger for cigarette ighter 12V/
24V - 1.2A 009290
Data transfer cab e, ength 20m
with converter RS485 / RS232 009291
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
10
DISPLAY AND USER MODE
Graphic disp ay
2.8” Graphic TFT co or disp ay
Size: 43.2 X 57.6 mm
Pixe s: 240 X 320
Contro e ements Sea ed push ON/OFF button with LED indicator
Quick “SELECT” push button for use of the device
Wired interface BINDER 6 pin connection for the battery charger or the data transfer
cab e
Interface without wires
B uetooth Modu e 2.1
Scope: more than 100m in an open fie d
Pairing Code: 1357
DISPLAY FUNCTIONS
Mu ti window disp ays
Window 1 :
- F ow rate in pm or per gpm (factory setting)
- Pressure in BAR or PSI (factory setting)
Window 2 :
- F ow rate m3/h
- Pressure in BAR or PSI (factory setting)
Window 3 :
- Vo ume in m3
Window 4 :
- Ca ibration Mode
Changing the disp ay Simp y push the ‘‘SELECT’’ button and ho d for a moment (0.5 s)
Screen saver Push the ‘‘SELECT’’ button and ho d for more than 5 seconds
Disp ay functions Window 1, 2 and 3 in French (defau t anguage)
Window 4 in Eng ish (defau t anguage)
POWERING ON
Push the ON/OFF button once
SETTING
Disp ay units Adjust by 2 DIP interna switches
Maximum f ow rate Adjust by 3 DIP interna switches
CALIBRATION
Ca ibration is possib e by opening the housing and pushing an interna button
CHARGER
Type of charge A constant current, then constant vo tage
Charge time 5 hours
Input vo tage 5 V (by USB jack)
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

11
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
11.3 - Measuring accuracy
11.4 - Conditions of use
REFERENCE CONDITIONS
Products to measure Water
Temperature +20°C
Pressure 7 bar
Upstream waterf ow section Identica water f ow direction to that of the device
MAXIMUM MEASUREMENT ERROR
F ow measurement +/- 1,5 %
Pressure measurement +/- 1 %
TEMPERATURE
Maximum operating temperature +10°C to +60°C
Maximum battery charge
temperature 0°C to °40°C
Maximum storage temperature -20°C to +70°C
PROTECTIVE CAPACITY OF THE ELECTRICAL ENCLOSURE EN60529
IP65
BATTERY
Type Lithium Ion Po ymer
Capacity 1800 mAh
Nomina vo tage 3,7 V
Consumption
190 mA with disp ay on and B uetooth® modu e and seria ink
activated
150 mA with disp ay on and B uetooth® modu e and seria ink
deactivated
90 mA with disp ay off and B uetooth® modu e and seria ink
activated
40 mA with disp ay off and B uetooth® modu e and seria ink
deactivated
Battery ife >8 hours with disp ay on and seria ink deactivated
>40 hours with disp ay off and seria ink deactivated
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
12
11.5 - Connection outlets
CABLE CONNECTION (RS485)
Automatic connection detection
Frame format
• Connection RS485
• STX nnnnn LMP ddddd BAR pp.ppCRLF
• STX : Start Of Text (02H)
• nnnnn: samp e number (0 to 65535)
• ddddd : f ow va ue of 5 digits (0 to 9)
• pp.pp : pressure va ue of 4 digits (0 to 9) with a dot
• CR : Carriage Return (0DH)
• LF : Line Feed (0AH)
Remarques :
• when the f owmeter is set up in GMP, LMP is rep aced by GMP
• when the f owmeter is set up in PSI, BAR is rep aced by PSI
Connection speed 9600 Bauds
BLUETOOTH® CONNECTION
Automatic connection detection
Frame format
• B uetooth connection
• STX nnnnn LMP ddddd BAR pp.ppCRLF
• STX : Start Of Text (02H)
• nnnnn: samp e number (0 to 65535)
• ddddd : f ow va ue of 5 digits (0 to 9)
• pp.pp : pressure va ue of 4 digits (0 to 9) with a dot
• CR : Carriage Return (0DH)
• LF : Line Feed (0AH)
Remarques :
• when the f owmeter is set up in GMP, LMP is rep aced by GMP
• when the f owmeter is set up in PSI, BAR is rep aced by PSI
Termina name POK V3
Pairing Code 1357
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

13
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
12 • Dimensions
12.1 - Flowmeter
DIAMETER A (mm) B (mm) C (mm) WEIGHT ( g)
DN40 250 166 160 2,93
DN65 255 166 184 3,37
DN80 263 166 199 3.55
DN100 268 173 220 4,07
DN150 274 199 272 5,27
PO SAS can supp y each product with
different coup ings. Depending on your
order the coup ings can be different
from the ones shown here.
A
C
B
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
14
12.2 - Stabilizing legs made in aluminium alloy
12.3 - Stabilizing legs made in plastic
POSITION A (mm) B (mm) C (mm) WEIGHT ( g)
Unfo ded 349 513 91 2,63
Fo ded 370 173 91 2,63
POSITION A (mm) B (mm) C (mm) WEIGHT ( g)
Unfo ded 378 550 103 2,63
Fo ded 380 197 103 2,63
A
A
BB
CC
A
A
BB
CC
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

15
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
13 • Preface
The device is intended to disp ay the f owrates as indicated in §11.2. Outside of these temperature ranges
the data is erroneous and is not guaranteed.
The various sensors may be damaged if an operating pressure of 16 BAR is exceeded.
A ways check the presence of the protective cap on the device, when no cab e is connected.
14 • Fold/Unfold
- 1 - Unfo d the stabi izing egs by pu ing on them (Rep A)
- 2 - Check if they are correct y attached to the f owmeter
- 3 - Ensure a of the tips on the stabi izing egs are in contact with the ground and that the f owmeter can
not s ide or move (Rep B)
- 4 - After use, pu the ocking ring to disengage the ocking mechanism to fo d (Rep C)
DO NOT WAL ON THE STABILIZING LEGS, OR PUT WEIGHT ON THEM, AS THIS
COULD DAMAGE THE LEGS.
Rep BRep A Rep C
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
16
15 • Functions of the Flowmeter
15.1 - Powering On
Powering on the device is done by pressing the ON/OFF button. An LED i uminates around the button to
indicate the device is turned on.
15.2 - Powering Off
Powering off the device is done by pressing the ON/OFF button. The i uminating LED ight turns off; indicating
the power of the device is off.
When the flowmeter is powered off, the volume totalizer is reset to zero
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

17
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
15.3 - To start use
To start the f owmeter, momentari y press the “SELECT” button (0.5 seconds)
The home screen disp ays the POK ogo and the firmware version.
After 10 seconds, the device disp ays page 1, on which the f ow measurement is disp ayed in pm format (or
gpm depending on the setting) and pressure BAR format (or PSI depending on the setting).
The screen a so disp ays
the percentage of battery
ife (from 0 to 100 %)
associated with a symbo .
Release
V3.0.4
LPM
BAR
00000
100%
00.00
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
18
15.4 - Changing the display
When the device is powered on, it has mu tip e disp ay windows. The transition from one window to another
is done by momentari y pressing the “SELECT” button (0.5 seconds):
Disp ay page 1
Disp ay page 2
Disp ay page 3
LPM
BAR
00000
100%
00.00
M³h
BAR
00000
100%
00.00
Vol me (m³)
00000
100%
Start the flowmeter
by pressing on ‘‘SELECT’’
Display page 1
Display page 2
Display page 3
Short press on "Select"
Short press on "Select"
Short press on "Select"
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

19
MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
15.5 - Resetting the sample number to zero
Reset the samp e number of the B uetooth® or RS485 connection by activating the seria connection (see
§15.8)
15.6 - Resetting the volume to zero
Page three measures the vo ume of tota water. Reset the vo ume by pushing the “SELECT” button for five
seconds.
Reset can on y be done on y when f owmeter is on disp ay page 3
When the f owmeter is powered off, the vo ume tota izator is reset to zero
When the screen saver is active, the tota izator is not reset to zero
15.7 - Battery saver
To activate the battery saver, simp y press the push button “SELECT” for more than 5 seconds, whi e on page
1 or page 2. In screen saver mode, the unit continues to operate norma y; on y the disp ay is turned off.
To turn on the disp ay from screen saver mode, press the push button “SELECT” for 5 seconds.
When the unit is in standby, the tota izator cannot be reset to zero.
The screen saver mode can be enab ed even if a host is connected to the device.
LPM
BAR
01283
100%
05.25
M³h
BAR
00307
100%
06.12
LPM
BAR
01283
100%
05.25
M³h
BAR
00307
100%
06.12
BT Terminal
Communication
00031 LPM : 5 05 BAR : 07. 5
00030 LPM : 5 07 BAR : 07. 7
000 9 LPM : 5 0 BAR : 07.36
000 8 LPM : 5 5 BAR : 07.38
000 7 LPM : 5 7 BAR : 07.40
000 6 LPM : 5 30 BAR : 07.4
000 5 LPM : 5 35 BAR : 07.44
000 4 LPM : 5 40 BAR : 07.46
000 3 LPM : 5 4 BAR : 07.46
000 LPM : 5 4 BAR : 07.46
000 1 LPM : 5 40 BAR : 07.44
BT Terminal
Communication
00000 LPM : 5 05 BAR : 07. 5
00031 LPM : 5 05 BAR : 07. 5
00030 LPM : 5 07 BAR : 07. 7
000 9 LPM : 5 0 BAR : 07.36
000 8 LPM : 5 5 BAR : 07.38
000 7 LPM : 5 7 BAR : 07.40
000 6 LPM : 5 30 BAR : 07.4
000 5 LPM : 5 35 BAR : 07.44
000 4 LPM : 5 40 BAR : 07.46
000 3 LPM : 5 4 BAR : 07.46
000 LPM : 5 4 BAR : 07.46
000 1 LPM : 5 40 BAR : 07.44
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de

MOP_MES_01343_EN_D - 07/12/2016 - Copyright© POK SAS - I ustrations are on y informative
20
15.9 - Low battery
The device measures the charge eve of the battery, in rea time, and disp ays it on each page in the top
right corner.
The va ue varies between 0 and 100%.
When the charge eve is between 10% and 20% the disp ay screen on pages 1,2 and 3 turns ye ow.
When the charge eve of the battery reaches ess than 10%, the disp ay screen f ashes red (on pages 1, 2
or 3).
15.8 - Bluetooth® or serial connection activation
The B uetooth® and seria connections are not activated when starting the f owmeter. Their activation is
enab ed (both together) by pushing « SELECT » button for 2 seconds.
A further pressure on « SELECT » button for 2 seconds deactivate B uetooth® and seria connections.
When the connections are switched on, the symbo
B uetooth® “ ” f ashes on the screen.
When the connections are switched off, the symbo
B uetooth® “ ” disapears.
When connections are switched on and the f owmeter
is connected to a remote host by B uetooth®, the
symbo B uetooth® “ ” is fixed on the screen.
When connections are switched on and the
f owmeter is connected to a remote host by seria
ink, the symbo B uetooth® “ ” sti f ashes on
the screen.
Connections can be actived or deactived on y from
page 1 and 2.
Vol me (m³) 20%
Vol me (m³)
0%
M³h
BAR
00307
100%
06.12
M³h
BAR
00307
100%
06.12
M³h
BAR
00307
100%
06.12
M³h
BAR
00307
100%
06.12
ICS Schneider Messtechnik GmbH
Briesestraße 59
D-16562 Hohen Ne endorf / O T Bergfelde
Tel.: 03303 / 504066
Fax: 03303 / 504068
info@ics-schneide r.de
www.ics-schneide r.de