Idaho Jones Pump-A-Collect User manual

User Guide
Pump-A-Collect
2x24mm Cups
Hands-Free, Wearable, Silicone Collection Cups
17, 19, 21, and 27mm attachments are sold separately
Comfy silicone

Pump wherever and whenever you want, discreetly and
comfortably.
Our goal with our Pump-A-Collect cups is to empower
you further in your pumping journey. Instead of having
anges and bottles sticking out of your bra, you can
now pop down your shirt and enjoy pumping with
hands-free-dom and graceful discretion.
The silicone anges of Pump-A-Collect are designed to
provide the ultimate comfort in pumping. You will never
want to go back to subjecting your precious breasts to
hard plastic.
Hope you enjoy your Pump-A-Collect cups and freedom!
Idaho Jones® Pump-A-Collect
Hands-Free, Wearable, Silicone Collection Cups
2

Table of Contents
What’s in the Box
Cleaning
How to Assemble
Correct Placement
Position for Expressing
Disconnecting and Storing Milk
Compatible Pumps
Inserting the Tubing Into the Pump
Inserting the Tubing Into the
Pump-A-Collect Collection Cups
Troubleshooting
Replacing your Pump-A-Collect Parts
5
6
7
9
10
11
12
13
13
17
19
3

Important Information
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
USING YOUR PUMP-A-COLLECT CUPS FOR THE FIRST TIME.
•Wash your hands with soap and water and dry thoroughly before
assembling parts.
•Ensure all parts are clean and dry before each use.
•Avoid harsh detergents as this may damage the product.
•Exposure to detergent may make the silicone appear cloudy over
time.
•Do not use a steam sterilizer or dishwasher for any of the collection
cup parts at any point.
•All parts, EXCEPT FOR THE WHITE MEMBRANE CAPS, can be boiled
for a total of 3 minutes in a pot of boiling water before rst use only.
Do not boil again. Only hand wash and/or use UV sterilization/cold
water sterilization going forward.
•Please do not ever boil the white membrane caps. Hand washing them
before rst use is sucient.
•Do not boil your parts after the rst sterilization. Only hand wash and/
or use UV sterilization/cold water sterilization going forward.
•Store in a cool, dry space and avoid direct sunlight.
•Replace the parts or the product if they show signs of wear or
damage.
•Replace the valves and membrane caps every 1-3 months depending
on frequency of use.
•Please do not use a cleaning brush inside the valves as this may
damage the valve or shorten its lifespan.
•If you experience any pain while using this device, seek professional
advice from a Lactation Consultant to ensure you have a correctly-
tted ange.
•Contains small parts which may be a choking hazard for children.
4

What’s in the Box:
2x Membrane caps
2x Membranes
2x Valve bases
2 Collection cups
(6Oz/180ml)
2x Silicone breast shields / anges
2x 24mm
2x Valves
*Breast pump and tubing not included
**27mm anges and 17mm, 19mm, 21mm inserts are sold separately
5

Cleaning
BEFORE FIRST USE
•Disassemble all parts.
•Wash in warm soapy water.
•Rinse well with clean water.
•Submerge all parts, EXCEPT FOR THE WHITE MEMBRANE
CAPS, in a pot of water and boil for no longer than 3 minutes.
•Use a large pot to prevent parts from touching sides or the
bottom of pot.
•Shake off excess water and air-dry on a dedicated rack or
clean cloth.
хDO NOT boil the white membrane caps. Hand washing them
before rst use is sucient.
AFTER EACH USE
•Put aside the membrane caps since they do not come in
contact with breastmilk when used correctly.
•Disassemble all other parts (collection cup, silicone breast
shield, insert, valve, valve base and membrane).
•Rinse with cold clean water soon after use.
•Wash in warm soapy water.
◦Valves can be cleaned by gently rubbing between
ngers (do not use brush).
•Rinse well.
•Shake off excess water and air-dry on a dedicated rack or
clean cloth.
хDo not wash parts in the dishwasher.
HOW TO SANITIZE
•Follow the cleaning instructions for “after each use” above.
•Use UV or cold water sterilization.
х DO NOT steam sterilize or boil after the rst time.
6

How to Assemble
1
2
3
7

5
How to Assemble
4
8

Correct Placement
PLACEMENT IN BRA
IDEAL BRA FIT
Correct nipple alignment
and a supportive bra that
keeps the cups securely
in place will ensure your
pumping sessions are
comfortable and effective.
Double check that you have
a good seal between the
ange and your skin.
9

Position for Expressing
IDEAL GOOD
MAY LEAK MAY LEAK
WON’T WORK
UPRIGHT SLIGHTLY FORWARD
BENDING FORWARD RECLINING
LAYING BACK (OR SIDE)
10

Disconnecting and Storing Milk
DISCONNECTING AND STORING MILK
Remove your membrane caps or tubing from the cups.
Carefully remove the cups from your bra and place
them on a at, rm surface until you’re ready to
transfer your milk.
2
1
3Pour the milk out of the dedicated hole at the top of
the collection cups.
Warning! There might be some
milk remaining in the nipple hole
in the middle. Align the nipple
hole with the hole at the top. Pour
the remaining milk into the bottle
carefully. Make sure to do a nal tip
to fully empty the collection cup.
11

Compatible Pumps
AMEDA
MEDELA Lactina, Symphony, Pump In Style Advance,
Pump In Style with MaxFlow, Sonata, Freestyle,
Freestyle Flex, Swing Maxi, Swing.
FREEMIE
SPECTRA
ARDO
EVENFLO
MOTIF
LANSINOH
HYGEIA
RUMBLE TUFF
PHILIPS AVENT
MOMCOZY
UNIMOM
ZOMEE
BELLABABY
BABY BUDDHA
If your pump is not included in this list, please contact us at
[email protected].
Mya, Mya Joy, Finesse, Purely Yours, Purely Ultra
Independence, Liberty.
S1, S2, M1, 9+, 9s, Synergy Gold.
Calypso
Advanced
Luna, Duo
Enjoye
Serene Express
Single Electric
Double Electric Portable
Minuet
Z1, Z2
12

PUMP
CUP
TUBE
Inserting the Tubing Into the Pump
To maximize suction and pumping output, please use your
pump’s existing tubing.
Insert the tubing
into your pump as
per your pump’s
instruction manual.
You need to insert
your tubing into the
ports on membrane
caps very rmly. CUP
TUBE
PUMP
Inserting the Tubing Into the
Pump-A-Collect Collection Cups
The tubing must go all the way down in the allocated gap in
the ports on the membrane caps.
Sometimes, twisting and pushing the tube inside is the most
effective way of achieving the rmest t.
Your tubing should be tightly secured in the ports on the
membrane caps and should NOT come off as a result of a
gentle pull.
13

Inserting the Tubing Into the
Pump-A-Collect Collection Cups
If your pump’s tubing doesn’t have any adapters (e.g. Spectra
S1, S2, 9 Plus, Lansinoh, Ardo Calypso), simply insert the tubing
rmly in the membrane cap as far down as possible. You may
nd twisting and pushing might enable you to push the tubing
further down into the membrane cap.
TUBING WITHOUT ANY ADAPTERS
TUBE
CUP
MEMBRANE CAP
If you have trouble inserting your tubing, use Tubing Adapter A.
TUBING ADAPTER A
TUBE
MEMBRANE CAP
14

TUBING WITH REMOVABLE ADAPTERS
If the adapter can be removed (e.g. Baby Buddha, Pumpables
SuperGenie, Bella Baby), remove it.
Inserting the Tubing Into the
Pump-A-Collect Collection Cups
And then insert the tubing into the ports on the membrane
caps.
TUBING ADAPTER A
TUBE
MEMBRANE CAP
If you have trouble inserting your tubing, use Tubing Adapter A.
15

If the adapter CANNOT be removed (e.g. Medela Pump In Style
Advance, Pump In Style with MaxFlow, Freestle Flex, Swing),
use Tubing Adapters A + B.
Inserting the Tubing Into the
Pump-A-Collect Collection Cups
TUBING WITH NON-REMOVABLE ADAPTERS
TUBING ADAPTER A
TUBING ADAPTER B
ALTERNATIVELY, you can also cut the tubing close to the
collection cup side at adapter end and attach it directly to the
collection cup, without any adapters or with Tubing Adapter A.
16

Troubleshooting
ISSUE SOLUTION
Condensation
in tubing
Ensure the tubing, the silicone membranes,
and membrane caps are dry before use.
If condensation occurs, ensure tubing is
dry before next use: Disconnect the tubing
from cups and turn the pump back on to
dry the tubing while you are storing your
breastmilk.
Milk in tubing
Check the membranes for damage.
Replace the membranes if needed and
clean/replace the tubing.
Do not sterilize tubing in the dishwasher,
steam sterilizer, or by boiling.
Low or no
suction
Make sure your pump is turned on and the
suction level is set properly. Check duckbill
valves for any damage or wear. Replace
valves if needed. Conrm that duckbill
valves are oriented in the correct position;
see assembly instructions for guidance.
Check that all parts are dry and
securely assembled.
Check tubing to ensure it is inserted into
the ports on membrane caps rmly.
Keep collection cups with tubing
perpendicular and upright in bra;
see placement and bra t instructions.
17

Troubleshooting
Air escaping
or whistling
Some audible air is normal as air
movement is part of suction control.
Review “Inserting the Tubing”
section to ensure that you are using your
tubing appropriately and that your tubing is
inserted into the ports on
membrane caps rmly.
ISSUE SOLUTION
Backow
Protector/
Membrane
Cap opening/
clicking
Separate silicone membrane from
membrane cap and valve base and
ensure that all parts are clean and dry.
Examine membrane for damage or warping
and replace as needed. Reattach the
membrane to the valve base and conrm
that seal is tight before closing with
membrane cap.
Nipple Pain or
Discomfort
Seek advice from a Lactation Consultant
as comfort can be key to sustaining a
breastfeeding journey.
Ensure you are using well-tted breast
shields for both breasts. Lubricate breast
shields with a thin layer of coconut oil if
necessary.
DO NOT continue using your Pump-A-Collect Cups if you
experience pain or discomfort while pumping.
18

Replacing Your Pump-A-Collect Parts
VALVES MEMBRANES
Replace every 1-3 months depending on frequency of use.
To get the most out of your parts:
•Do not steam sterilize or boil after rst use.
•Do not wash them in the dishwasher.
•Wash all parts in warm soapy water and air dry.
•You can use UV or cold water sterilization.
You can purchase replacement valves and membranes on our
website:
www.idaho-jones.com
19

WEARABLE
COMPLETE FREEDOM
TO PUMP ANYWHERE
ANYTIME!
@idaho-jones
www.idaho-jones.com