idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN User manual

REVISION DATE
20220124
DOCUMENT NUMBER
TERMS OF USE: Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by
Certified Technicians who are employed by a registered business specialized in the installation of auto-
motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle,
it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide
and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever,
including but not limited to any consequential damages, incidental damages, damages for loss of time,
loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or
may not have resulted from the use, misuse, improper installation or operation of its products. ADS
reserves itself the right to suspend any Weblink® account without notice and decline to offer technical
support to non-Certified Technicians, non-compliant Certified Technicians or end users.
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
Patent No. US 8,856,780 CA 2759622
INSTALL GUIDE
COMIDSRSBZ3CMBMXA0EN
HARDWARE
CMBMXA0
ACCESSORIES
ADSUSB REQUIRED
COMPATIBLE RFKIT OPTIONAL
DRONE MOBILE DR2000 OPTIONAL
ADSTOOLSMB01 OPTIONAL
FIRMWARE
COMIDSRSBZ3CMBMXA0
www.idatastart.comAutomotive Data Solutions Inc. © 2022
78844

Patent No. US 8,856,780 CA 2759622
VEHICLE LIST - 1 OF 2
MAKE MODEL YEAR INSTALL TYPE
FEATURES
3X LOCK START/STANDALONE MOD. SECURE TAKEOVER DATA IMMOBILIZER BYPASS ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE POWER LIFTGATE PARKING LIGHT CTRL HEATED SEATS CTRL VENTILATED SEATS CTRL RAP SHUTDOWN CTRL TACHOMETER STATUS MONITORING BRAKE PEDAL STATUS MONITORING VSS STATUS MONITORING GLOW PLUG STATUS MONITORING DOOR STATUS MONITORING TRUNK STATUS MONITORING HOOD STATUS MONITORING*
MERCEDES-BENZ
C-Class AMG Coupe PTS AT 12-15 2 • • • • • • • • • • • • • • • • • • •
C-Class AMG Coupe STD key AT 12-15 1 • • • • • • • • • • • • • • • • • • •
C-Class AMG Sedan PTS AT 08-14 2 • • • • • • • • • • • • • • • • • • •
C-Class AMG Sedan STD key AT 08-14 1 • • • • • • • • • • • • • • • • • • •
C-Class Coupe PTS AT 12-15 2 • • • • • • • • • • • • • • • • • • •
C-Class Coupe STD key AT 12-15 1 • • • • • • • • • • • • • • • • • • •
C-Class Sedan PTS AT 08-14 2 • • • • • • • • • • • • • • • • • • •
C-Class Sedan STD key AT 08-14 1 • • • • • • • • • • • • • • • • • • •
CLS-Class AMG Sedan PTS AT 12-13 4 • • • • • • • • • • • • • • • • • • •
CLS-Class AMG Sedan STD key AT 12-13 3 • • • • • • • • • • • • • • • • • • •
CLS-Class Sedan PTS AT 12-13 4 • • • • • • • • • • • • • • • • • • •
CLS-Class Sedan STD key AT 12-13 3 • • • • • • • • • • • • • • • • • • •
E-Class AMG Sedan PTS AT 10-13 4 • • • • • • • • • • • • • • • • • • •
E-Class AMG Sedan STD key AT 10-13 3 • • • • • • • • • • • • • • • • • • •
E-Class AMG Wagon PTS AT 10-13 4 • • • • • • • • • • • • • • • • • • •
E-Class AMG Wagon STD key AT 10-13 3 • • • • • • • • • • • • • • • • • • •
E-Class Coupe PTS AT 10-13 2 • • • • • • • • • • • • • • • • • • •
E-Class Coupe STD key AT 10-13 1 • • • • • • • • • • • • • • • • • • •
E-Class Sedan Diesel PTS AT 10-13 4 • • • • • • • • • • • • • • • • • • • •
E-Class Sedan Diesel STD key AT 10-13 3 • • • • • • • • • • • • • • • • • • • •
E-Class Sedan PTS AT 10-13 4 • • • • • • • • • • • • • • • • • • •
E-Class Sedan STD key AT 10-13 3 • • • • • • • • • • • • • • • • • • •
E-Class Wagon PTS AT 10-13 4 • • • • • • • • • • • • • • • • • • •
E-Class Wagon STD key AT 10-13 3 • • • • • • • • • • • • • • • • • • •
* If equipped with a factory hood switch.
NOTES
I This fi rmware covers Automatic Transmission
(AT) vehicles only.
II All the covered Push To Start (PTS) vehicles are
equipped with a keyless authorization system
called "Keyless Go".
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 2 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
VEHICLE LIST - 2 OF 2
MAKE MODEL YEAR INSTALL TYPE
FEATURES
3X LOCK START/STANDALONE MOD. SECURE TAKEOVER DATA IMMOBILIZER BYPASS ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE POWER LIFTGATE PARKING LIGHT CTRL HEATED SEATS CTRL VENTILATED SEATS CTRL RAP SHUTDOWN CTRL TACHOMETER STATUS MONITORING BRAKE PEDAL STATUS MONITORING VSS STATUS MONITORING GLOW PLUG STATUS MONITORING DOOR STATUS MONITORING TRUNK STATUS MONITORING HOOD STATUS MONITORING*
MERCEDES-BENZ
GLK-Class Diesel PTS AT 09-12 2 • • • • • • • • • • • • • • • • • • • •
GLK-Class Diesel PTS AT 13-14 4 • • • • • • • • • • • • • • • • • • • •
GLK-Class Diesel STD key AT 09-12 1 • • • • • • • • • • • • • • • • • • • •
GLK-Class Diesel STD key AT 13-14 3 • • • • • • • • • • • • • • • • • • • •
GLK-Class PTS AT 09-12 2 • • • • • • • • • • • • • • • • • • •
GLK-Class PTS AT 13-14 4 • • • • • • • • • • • • • • • • • • •
GLK-Class STD key AT 09-12 1 • • • • • • • • • • • • • • • • • • •
GLK-Class STD key AT 13-14 3 • • • • • • • • • • • • • • • • • • •
SLK-Class AMG PTS AT 12-13 2 • • • • • • • • • • • • • • • • • • •
SLK-Class AMG STD key AT 12-13 1 • • • • • • • • • • • • • • • • • • •
SLK-Class PTS AT 12-13 2 • • • • • • • • • • • • • • • • • • •
SLK-Class STD key AT 12-13 1 • • • • • • • • • • • • • • • • • • •
* If equipped with a factory hood switch.
NOTES
I This fi rmware covers Automatic Transmission
(AT) vehicles only.
II All the covered Push To Start (PTS) vehicles are
equipped with a keyless authorization system
called "Keyless Go".
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 3 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 4 OF 28
• 20220124
BOX CONTENTS - 1 OF 1
21 3 4
2
1
3
21 3
42 8
1 3 5 7
10
9
6
7
9
3
10
8
11
13
14
12
15
17
18
19
20
16
6
4
1
2
5
3
6
4
1
2
5
3
6
4
1
2
5
2
1
3
4
42 8
1 3 5 7
10
9
6
7
9
3
10
8
6
4
12
5
2
1
2
1
3
4
2
1
3
4
2
1
3
4
7
9
3
10
8
11 12
6
4
12
5
H-HARNESS 1
MODULE
BOX CONTENTS
T-HARNESS 1
2 PIN BLACK CONNECTOR
EXPANSION PACK
EXTRA CONNECTOR HOUSING
10 PIN WHITE CONNECTOR
12 PIN BLACK CONNECTOR
PROGRAMMING
BUTTON
LED 1 LED 2
RED
BLUE
BLACK
BLACK
RF PORT/WEBLINK PORT
BLACK
BLUE
BLACK
BLACK
BLACK
USB
BLUE
TELEMATIC
PORT
WHITE
BLACK
BLUE
BLACK
BLACK
XP LED 1 XP LED 2
AFTERMARKET HOOD SWITCH AND CABLE
WARNING STICKER
LED LED
TOP VIEW TOP VIEWBOTTOM VIEW
EXPANSION PACK ASSEMBLY
(Accessories sold separately)
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTER
USB PORT
4 PIN BLACK CABLE
ELECTRONIC IGNITION SWITCH REMOVAL TOOL (accessory sold separately)
IGNITION
SWITCH
ADS-TOOLS-MB01 OR
MERCEDEZ BENZ P/N 639 589 01 07 00
MODULE
WEBLINK PORT
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 5 OF 28
• 20220124
COMPATIBLE ACCESSORIES - 1 OF 1
RF KIT
RF KIT (Visit our website to see if this accessory is included with your product)
ANTENNA
FLASH RF DECODER
BEFORE INSTALLATION
RF DECODERBLUE CABLE BLACK CABLE
(NC) RED
(NC) BLACK
BLACK
BLUE
MODULE
RF PORT
MODULE
TELEMATIC PORT
DRONE
(NC)
TELEMATIC KIT (accessory sold separately)
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TECHNICAL NOTE - 1 OF 1
IMPORTANT INSTALL VIDEO GALLERY AVAILABLE ONLINE
Before installing this product, consult our Install Video Gallery and watch:
• Vehicle Disassembly Procedure videos
• Module Connection Procedures videos
• Module Programming Procedures videos
To access the videos, simply log in your Weblink user account,
and click on "Install videos" under the "Support" tab.
Then, select a vehicle make, year and model to display the available videos.
Æ
Æ
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 6 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
A
COMPONENT LOCATOR - 1 OF 1
INTERIOR VIEW
DRIVER SIDE VIEW PASSENGER SIDE VIEW
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 7 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
01
ENGINE
START
STOP
OFF ACC ON STARTSTART
START
02
ENGINE
START
STOP
OFF ACC ON STARTOFF
03
04
05
06
07
08
ENGINE
START
STOP
OFF ACC ON STARTSTART
START
09
10
ENGINE
START
STOP
OFF ACC ON STARTOFF
11
12
13
14
RF
15
16
17
MODULE INSTALLATION PROCEDURE - 1 OF 1
START the vehicle. Verify all vehicle
functionalities. If the vehicle displays error
messages or any malfunction: stop the
installation and service the vehicle.
Turn OFF the vehicle.
Verify all keyfob functionalities (Door Lock,
Door Unlock, Trunk Release and RFID access
if equipped).
Insert the expansion pack in the module.
Connect the module to the computer with the
programming cable (WEBLINK port). Flash
the module with the latest firmware then flash
the expansion pack.
Connect and secure every connector to the
vehicle, as shown in STEP 1 of the WIRING
DIAGRAM.
WARNING: Any vehicle harness that is
disconnected during installation, must be
re-connected before performing any system
tests. Failure to comply will result in vehicle
displaying error messages. An OEM scantool
will be required to clear the error messages.
START the vehicle. Verify all vehicle
functionalities.
WARNING: If the vehicle displays error
messages or any malfunction, stop the
installation, verify every connection and if the
problem persists, call technical support.
Turn OFF the vehicle.
Connect every connector to the module, as
shown in STEP 2 of the WIRING DIAGRAM.
Connect every other connector to the module,
as shown in STEP 3 of the WIRING DIAGRAM.
If the vehicle is not equipped with a factory
hood switch, install an aftermarket hood
switch as shown in STEP 4 of the WIRING
DIAGRAM.
If required, connect a compatible RF Kit to the
RF port of the module.
If required, connect a compatible Telematics
Device to the TELEMATIC port of the module.
Put sticker 1 on a clean and visible surface
in the engine bay and put sticker 2 under the
dashboard near the OBDII connector.
Module installation procedure completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 8 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TYPE 1 - WIRING DIAGRAM - 1 OF 1
A (VEHICLE HARNESS)
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN (NOT USED)
BLACK 20 PIN
BLACK 10 PIN
BLACK 10 PIN
BLUE 6 PIN
BLUE 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
CONNECT TO MODULE
RELAY
IGNITION SWITCH
A
STEP 1
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 9 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TYPE 2 - WIRE CHART - 1 OF 1
MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR
MERCEDES-BENZ
C-Class AMG Coupe PTS AT 12-15 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
C-Class AMG Sedan PTS AT 08-14 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
C-Class Coupe PTS AT 08-15 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
C-Class Sedan PTS AT 12-14 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
E-Class Coupe PTS AT 10-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
GLK-Class Diesel PTS AT 09-12 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
GLK-Class PTS AT 09-12 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
SLK-Class AMG PTS AT 12-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
SLK-Class PTS AT 12-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 10 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TYPE 2 - WIRING DIAGRAM - 1 OF 2
A (VEHICLE HARNESS)
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN
BLACK 20 PIN
BLACK 10 PIN
BLACK 10 PIN
BLUE 6 PIN
BLUE 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
CONNECT TO MODULE
RELAY
IGNITION SWITCH
A
STEP 1
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
CAN JUNCTION CONNECTOR
CAN CONNECTORS
01 CANH
02 CANL
SEE MODULE PROGRAMMING PROCEDURE - PTS
TO IDENTIFY THE REQUIRED CAN CONNECTOR.
ONCE IDENTIFIED, DISCONNECT IT FROM THE CAN
JUNCTION CONNECTOR AND CONNECT IT TO C1.
REFER TO WIRE CHART
REFER TO COMPONENT LOCATOR
IF THE REQUIRED CAN CONNECTOR DOES NOT FIT IN C1:
SEE NEXT PAGE FOR INSTRUCTIONS
01 PINK/RED - CANH
02 PINK/BLACK - CANL
C1
CONNECT CONNECT
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 11 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
01 - CANH
02 - CANL
1- RELEASE RETAINING CLIP OF CAN CONNECTOR.
REMOVE CAN WIRES FROM HOUSING.
2- RELEASE LOCKING MECHANISM.
3- INSERT EMPTY HOUSING IN CAN JUNCTION CONNECTOR
(TO AVOID LOSING IT).
4- INSERT CAN WIRES IN PROVIDED HOUSING.
CONNECT IT WITH C1 HARNESS,
AS SHOWN IN WIRING DIAGRAM.
INSTRUCTIONS TO CHANGE THE HOUSING OF CAN WIRES
(ONLY IF THE CAN CONNECTOR DOES NOT FIT IN C1)
TYPE 2 - WIRING DIAGRAM - 2 OF 2
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 12 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TYPE 3 - WIRING DIAGRAM - 1 OF 1
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN (NOT USED)
BLACK 20 PIN
BLUE 6 PIN
BLUE 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO MODULE
RELAY
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
A: 10 PIN (VEHICLE HARNESS)*
*REMOVE THE HOUSING (GREEN OR WHITE) FROM OEM
CONNECTOR A. REPLACE IT WITH SUPPLIED HOUSING (BLACK).
OEM HOUSING IS NOT USED IN THE INSTALLATION.
BLACK 8 PIN
BLACK 8 PIN
BLACK 10 PINBLACK 10 PIN
BLACK 10 PIN
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
B: BLUE 8 PIN (VEHICLE HARNESS)
IGNITION SWITCH
B
A
STEP 1
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 13 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TYPE 4 - WIRE CHART - 1 OF 1
MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR
MERCEDES-BENZ
CLS-Class AMG Sedan PTS AT 12-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
CLS-Class Sedan PTS AT 12-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
E-Class AMG Sedan PTS AT 10-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
E-Class AMG Wagon PTS AT 10-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
E-Class Sedan Diesel PTS AT 10-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
E-Class Sedan PTS AT 10-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
E-Class Wagon PTS AT 10-13 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
GLK-Class Diesel PTS AT 13-14 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
GLK-Class PTS AT 13-14 CanH ~ Black 02 pin 01 Brown/Red (DATA) Front door jamb, passenger side A
CanL ~ Black 02 pin 02 Brown (DATA) Front door jamb, passenger side A
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 14 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
TYPE 4 - WIRING DIAGRAM - 1 OF 2
A: 10 PIN (VEHICLE HARNESS)*
*REMOVE THE HOUSING (GREEN OR WHITE) FROM OEM
CONNECTOR A. REPLACE IT WITH SUPPLIED HOUSING (BLACK).
OEM HOUSING IS NOT USED IN THE INSTALLATION.
MODULE
07 GRAY/WHITE - HOOD STATUS (-) INPUT
08 GRAY/BLACK (NOT USED)
BLACK 2 PIN
BLACK 20 PIN
BLACK 8 PIN
BLACK 8 PIN
BLACK 10 PINBLACK 10 PIN
BLACK 10 PIN
BLUE 6 PIN
BLUE 10 PIN
WHITE 10 PIN
1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4
2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1
IF NOT EQUIPPED
WITH AN OEM HOOD SWITCH,
INSTALL AN AFTERMARKET HOOD SWITCH
CONNECT TO VEHICLE
START VEHICLE WITH OEM KEYFOB TO TEST CONNECTIONS
CONNECT TO MODULE
RELAY
B: BLUE 8 PIN (VEHICLE HARNESS)
IGNITION SWITCH
B
A
STEP 1
STEP 2
WARNING
CONNECT TO MODULE
CONNECT IF REQUIRED
HOOD SWITCH
STEP 3
STEP 4
01 PINK/RED - CANH
02 PINK/BLACK - CANL
CAN JUNCTION CONNECTOR
CAN CONNECTORS
C1
01 CANH
02 CANL
SEE MODULE PROGRAMMING PROCEDURE - PTS
TO IDENTIFY THE REQUIRED CAN CONNECTOR.
ONCE IDENTIFIED, DISCONNECT IT FROM THE CAN
JUNCTION CONNECTOR AND CONNECT IT TO C1.
REFER TO WIRE CHART
REFER TO COMPONENT LOCATOR
IF THE REQUIRED CAN CONNECTOR DOES NOT FIT IN C1:
SEE NEXT PAGE FOR INSTRUCTIONS
CONNECT CONNECT
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 15 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
01 - CANH
02 - CANL
TYPE 4 - WIRING DIAGRAM - 2 OF 2
1- RELEASE RETAINING CLIP OF CAN CONNECTOR.
REMOVE CAN WIRES FROM HOUSING.
2- RELEASE LOCKING MECHANISM.
3- INSERT EMPTY HOUSING IN CAN JUNCTION CONNECTOR
(TO AVOID LOSING IT).
4- INSERT CAN WIRES IN PROVIDED HOUSING.
CONNECT IT WITH C1 HARNESS,
AS SHOWN IN WIRING DIAGRAM.
INSTRUCTIONS TO CHANGE THE HOUSING OF CAN WIRES
(ONLY IF THE CAN CONNECTOR DOES NOT FIT IN C1)
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 16 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
01
OFF
ACC ON
START
02
OFF
ACC ON
START
03
>>
04
OFF
ACC ON
START
05
06
OFF
ACC ON
START
07
MODULE PROGRAMMING PROCEDURE - STD KEY - 1 OF 1
LED 1 is solid RED. Insert key into ignition.
Turn key to ON position.
Wait, LED 1 will turn solid GREEN then will
turn solid RED.
WARNING: If LED 1 flashes RED/GREEN, turn
ignition to OFF position. The vehicle is PTS.
Follow appropriate PTS sections.
START vehicle for 15 seconds. LED 1 will turn
solid RED.
Wait, LED 1 will turn solid GREEN then will
turn OFF.
Turn key to OFF position. Remove key from
ignition.
Module Programming Procedure completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 17 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
>>
>>
01
ENGINE
START
STOP
STOP ACC ON START
ON
02
03
>>
>>
04
05
ENGINE
START
STOP
STOP ACC ON START
START
06
07
ENGINE
START
STOP
STOP ACC ON START
STOP
08
MODULE PROGRAMMING PROCEDURE - PTS - 1 OF 1
One of the connectors of the CAN junction
connector controls the keyless authorization
system (Keyless Go). The following procedure
will allow the module to identify the required
CAN connector.
Have the CAN junction connector accessible.
Identify every CAN connector whose CanH
and CanL wires match the colors listed in the
WIRE CHART.
LED 1 is solid RED. Push start button to ON
position.
Wait, LED 1 will flash RED/GREEN.
Disconnect the first connector of the CAN
junction connector whose CanH and CanL
wires match the colors listed in the WIRE
CHART. Wait 5 seconds.
If the parking lights flash, the required
connector is found. Connect it to the C1
connector as shown in the WIRING DIAGRAM
and go to step 5.
If the parking lights do NOT flash, the required
connector is NOT found. Reconnect it to the
CAN junction connector and repeat step 4 with
another connector.
Wait, LED 1 will turn solid GREEN then will
turn solid RED.
START vehicle for 15 seconds. LED 1 will turn
solid RED.
Wait, LED 1 will turn solid GREEN then will
turn OFF.
Push start button to OFF position.
Module Programming Procedure completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 18 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
>>
01
02
ENGINE
START
STOP
OFF ACC ON START
ON
03
04
ENGINE
START
STOP
OFF ACC ON STARTOFF
05
>>
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
Time restriction. Complete next step within 7
seconds.
Cycle ignition ON five times [5x OFF/ON]
rapidly. Parking Light will flash once [1x].
Wait, Parking Light will flash twice [2x], pause
for 1.5 second, then will flash once [1x] to
indicate that the valet mode is ON or twice [2x]
to indicate that the valet mode is OFF.
Turn ignition to OFF position.
Valet Mode Programming Procedure
completed.
To exit valet mode: repeat steps 1 to 4 then
START vehicle for 15 seconds.
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 19 OF 28
• 20220124
DOC.: #78844

Patent No. US 8,856,780 CA 2759622
>>
01
02
ENGINE
START
STOP
OFF ACC ON START
ON
03
04
05
06
>>
07
08
ENGINE
START
STOP
OFF ACC ON STARTOFF
09
ENGINE
START
STOP
OFF ACC ON STARTSTART
START
10
AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Program aftermarket remotes
before usage. A maximum of four [4x]
aftermarket remotes per system.
Time restriction. Complete next step within 7
seconds.
Cycle ignition ON five times [5x OFF/ON]
rapidly.
Parking Light will flash once [1x].
Time restriction. Complete next step within 5
seconds from previous step.
Press once [1x] on LOCK button of aftermarket
remote.
Parking Light will flash once [1x].
To program additional remotes: repeat steps 4
to 6 using each additional remote.
Wait, Parking Light will flash twice [2x].
Turn ignition to OFF position.
START vehicle for 15 seconds.
Aftermarket Remote Programming Procedure
completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2022 COMIDSRSBZ3CMBMXA0EN
PAGE 20 OF 28
• 20220124
DOC.: #78844