IDTECH VersaScan II User manual

VersaScan IITM
Barcode Scanner
User’s Manual
80105502-001 rev.A

FCC WARNING STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the
following conditions: this device may not cause harmful interference and this device must
accept any interference received, including interference that may cause undesired operation.
CANADIAN DOC STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise for digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de las classe B prescrites dans le Réglement sur le
brouillage radioélectrique édicté par les ministère des Communications du Canada.
CE STANDARDS
Testing for compliance to CE requirements was performed by an independent laboratory.
The unit under test was found compliant to class B limits of part 15 of the FCC rules.

LIMITED WARRANTY
ID TECH warrants to the original purchaser for a period of 36 months from the date of invoice
that this product is in good working order and free from defects in material and workmanship
under normal use and service. ID TECH’s obligation under this warranty is limited to, at its
option, replacing, repairing, or giving credit for any product which has, within the warranty
period, been returned to the factory of origin, transportation charges and insurance prepaid,
and which is, after examination, disclosed to ID TECH’s satisfaction to be thus defective. The
expense of removal and reinstallation of any item or items of equipment is not included in this
warranty. No person, firm, or corporation is authorized to assume for ID TECH any other
liabilities in connection with the sales of any product. In no event shall ID TECH be liable for
any special, incidental or consequential damages to purchaser or any third party caused by
any defective item of equipment, whether that defect is warranted against or not. Purchaser’s
sole and
exclusive remedy for defective equipment, which does not conform to the requirements of
sales, is to have such equipment replaced or repaired by ID TECH. For limited warranty
service during the warranty period, please contact ID TECH to obtain a Return Material
Authorization (RMA) number & instructions for returning the product.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANT ABILITY OR
FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO OTHER WARRANTIES OR
GUARANTEES, EXPRESS OR IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS
PRODUCT IS SOLD AS IS. IN NO EVENT SHALL ID TECH BE LIABLE FOR CLAIMS
BASED UPON BREACH OF EXPRESS OR IMPLIED WARRANTY OF NEGLIGENCE OF
ANY OTHER DAMAGES WHETHER DIRECT, IMMEDIATE, FORESEEABLE,
CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSE INCURRED BY REASON OF
THE USE OR MISUSE, SALE OR FABRICATIONS OF PRODUCTS WHICH DO NOT CON-
FORM TO THE TERMS AND CONDITIONS OF THE CONTRACT
The information contained herein is provided to the user as a convenience. While every effort
has been made to ensure accuracy, ID TECH is not responsible for dam-ages that might
occur because of errors or omissions, including any loss of profit or other commercial
damage, nor for any infringements or patents or other rights of third parties that may result
from its use. The specifications described herein were current at the time of publication, but
are subject to change at any time without prior notice.
© 2009 International Technologies & Systems Corporation. The information contained herein
is provided to the user as a convenience. While every effort has been made to ensure
accuracy, ID TECH is not responsible for damages that might occur because of errors or
omissions, including any loss of profit or other commercial damage. The specifications
described herein were current at the time of publication, but are subject to change at any time
without prior notice.
ID TECH is a registered trademark of International Technologies & Systems Corporation.
VersaScan II and Value through Innovation are trademarks of International Technologies &
Systems Corporation.

DataBar (RSS) Limited, Expanded.......................
6-7
10-12
Preface, Ez Troubleshooting.........................................
7
8
Reading Mode......................................................... 9
53-60
61-64
65-67
34~41
42~45
46~48
68-70
71-72
73-74
Code 39 (Full ASCII/STANDARD), Code 32..............
4-5
2-3
1
Setup Code, Preamble, Postamble..............................
PDF417, Idle Mode Setting........................................
Industrial 2 of 5, Matrix 2 of 5....................................
15~16 Enable/Disable Barcode Symbology..............26-27
Table of contents...............................................................
Cloning Mode................................................................
How to fix the scanner to the terminal...........................
How to change a cable.....................................................
How to set up the parameter............................................
Interfaces selection, Computer type, Default.................1
213
Check Version, Beep tone, Terminator.........................
314
415
Accuracy adjustment....................................................
516
Code ID........................................................................
617
Symbologies Code Identifier.........................................
7Set Code ID, Customer Configuration...............
8~9 18-19
20
Delay between block and character...........................
10 Keyboard layout, Caplock Mode, Numeric Key..........21
11 RS232: Baud rate, Data bits, Parity...........................22
12 RS232: Stop bit, Handshaking, ACK/NAK,
Flow Control, BCC.....................................................23
13
14 Wand Emulation parameter setting............................24
SETTING GROUP(GROUP1~14)
SYMBOLOGY FORMATTING(GROUP15~33)
FULL ASCII(CODE39)TABLE, FUNCTION
KEY TABLE(GROUP34~48)
APPENDIX
28
China postcode(Toshiba code)..................................17
18 MSI code, UK Plessey code......................................30
32
Code93, Telepen, IATA..............................................19 Interleaved 2 of 5, Code 11....................................... 34
20
21 36
22Codabar.....................................................................38
ABC Codabar, CX Codabar.......................................
23 40
41
24Codabar Coupling......................................................
25 42
26 UPC-E....................................................................... 44
27 UPC-E(0)&(1), UPC-E EXPAND............................... 45
UPC-A.......................................................................
28 46
47
48
49
29 EAN-8........................................................................
EAN-13, ISSN, ISBN.................................................
30
31
32 EAN/UCC 128, CODE 128........................................
Full ASCII table(Code 39)..............................
Trouble Shooting............................................
Function code table(Code 39) for PC-AT.......
GENERAL
Appendix 1 Default table...........................................
Appendix 2 Cable Pin Assignment............................
Appendix 3 Barcode test chart..................................
CONTENTS
33 52
75Appendix 4 Special setting code....................................76Appendix 5 PDF417 demo chart....................................
50-51

The VersaScan II decoder are mainly applied to the long range barcode
scanner.
VersaScan II

4
 
      "       
 !          
 
 
 
   
 
 583': 5, 254/4- 
9: 85=9     4+<+8 +*/: '4? *':' 5, :.+ ,/89: 85= 
4* 85=9  &&&& ?5; )'4 '*0;9: :.+ ":8/4-A9 +4-:. 9:'8:/4-
,853 :.+ *5:9 ,58='8* #.+ 2+4-:. 5, :.+ 9:8/4- 9.5;2*
(+ /4   58   & */-/:9
8* 85=9@ 95 54  &&&&
4* 85=9  *5:  9 '4 +4*/4- 5, )254/4-
&&&& ":'4* ,58 '4? ":8/4-
  

   
   
  *;62/)':+9 ' ='4*A9 9+::/4-9 /4 5:.+8 ='4*9 : )'4 9'<+ :/3+
=.+4 ' 4;3(+8 5, ='4*9 3;9: (+ 685-8'33+* :5 :.+ 9'3+ 9+::/4-9
 $9/4- :./9 -;/*+ 3'1+ '22 :.+ 4+)+99'8? 9+::/4-9 ,58 54+ ='4*
 ")'4 :.+     ('8 )5*+ 9.5=4 (+25=
 %.+4     /9 9)'44+* '22 9+:;6 6'8'3+:+89 =/22 (+
)54<+8:+* :5 '26.'4;3+8/) ).'8'):+89 '4* 9.5=4 54 :.+ 354/:58
 $9/4- ' ('8 )5*+ 68/4:+8 68/4: 5;: '22 :.+ 9+:;6 6'8'3+:+89 '9
5*+  ('8 )5*+ 2'(+29
 ")'4 :.+ 68/4:+* 2'(+29 9+7;+4:/'22? =/:. +'). ='4* :5 (+
685-8'33+*
 22 )254/4- 9:8/4-9 '8+ ;66+8 )'9+
 22 )254/4- 9:8/4-9 68/4:+* 54 2'(+29 9.5;2* (+ :.+ 9'3+ '9 :.59+ 54
:.+ 354/:58 9+7;+4:/'22? ,853 ,/89: :5 2'9:
 254/4- 35*+ =5819 /4 %58* 5:+ !'* 542?
 +<+8 +*/: :.+ *':' 54 :.+ ,/89: 85=  : /9 '4 +4:8? -':+ ,58
)254/4-
 #.+ )254/4- 9:8/4-A9 2+4-:. )'4 (+ '*0;9:+* (? )53(/4/4- 3;2:/62+
9:8/4-9 /4:5 54+ 58 (? (8+'1/4- 54+ 9:8/4- :5 3;2:/62+ 9:8/4-9 9:'8:/4-
,853 :.+ 9+)54* 85= ',:+8  +4-:. 3;9: (+ /4 9+7;+4)+9 5, ,5;8
9;). '9  &
 + 9;8+ :5 68/4: :.+ *5:9 +>'):2? =.+8+ :.+? '8+ 9.5=4 54 :.+ 354/:58

3. Scan CLONING MODE (Figure 1).
All parameters will be coverted to alphanumeric characters and
shown on the monitor.

9)
6
9)

The VersaScan II is designed to switch easily between interface options.
7

53~61)
61)
RESET
42
8
5 (page 15)
53~64)
53~64)

. A001$
. C007$
. C001$
. C003$
. C002$
PC-AT
. C004$
9

2.
3.the
If Auto-Sensing Mode is on, the LED will go off
if no bar code is detected after Deactivation Time
elapses.(The default is 3 sec.)
The LED lights automatically when a BAR CODE
is detected.
If Auto-Sensing Mode is on, the Magnetic Switch
and Green LED will be activated at the same time.
4. For advanced settings of Auto-Sensing Mode(such as Deactivation Time,
Magnetic Switch and Green LED) please refer to the next pages.
10

11
. F034$
MAGNETIC SWITCH ON
MAGNETIC SWITCH OFF
. F035$
1. The Magnetic Switch is automatically activated whenAuto-
Sensing Mode is on.
2. To enable Magnetic Switch, the scanner should be paired with
an Auto Stand.
3. When Magnetic Switch is off, the scanner will start auto-sensing
without an Auto Stand.
MAGNETIC SWITCH
GREEN LED/ SUPPLEMENT LIGHT
. F032$
GREEN LED ON
. F033$
GREEN LED OFF
1. The Green LED is automatically activated whenAuto-Sensing
Mode is on.
2. Green LED serves as Supplement Light for a CCD scanner in
order to enhance the sensitivity of scanner in Auto-Sensing
Mode.

12
1. The default Deactivation Time is 3 Sec.
2. Deactivation Time is the time interval between the last scan and
the automatic deactivation of LED in Auto-Sensing Mode.
3. You can set the Deactivation Time value by the following three
steps:
Step 1: scan Deactivation Time
Step 2: scan two digits(Limit Range: 01 ~ 30sec.) from the numeric
table below.
Step 3: scan Deactivation Time
DEACTIVATION TIME
. F030$
DEACTIVATION TIME
1. The scanner will beep three times as a reminder that a setting is
not yet complete.
2. If you make a mistake, forget a step, etc., scan RESET to start again.

BEEP OFF

SETUP CODE ON
CLEAR PRE/ POSTAMBLE

(default)

Symbologies Factory
ID AIM ID (new)
MSI
MSI(MOD 10 / CDV & not send CD) O]M0
]M1
EAN8(+2/+5 OFF)
EAN8(+2 ON)
EAN8(+5 ON)
S
]E4
]E4
]E4
UPC-E(+2/+5 OFF)
UPC-E(+2 ON)
UPC-E(+5 ON)
E
]E0
]E3
]E3
UPC-A(+2/+5 OFF)
UPC-A(+2 ON)
UPC-A(+5 ON)
A
]E0
]E3
]E3
EAN-13(+2/+5 OFF)
EAN-13(+2 ON)
EAN-13(+5 ON)
F
]E0
]E3
]E3
Code 93 L ]G0
Code 11(disable CDV)
Code 11(send one CD)
Code 11(send two CD)
Code 11(not send CD)
J
]H0
]H0
]H1
]H3
Telepen(ASCII)
Telepen(Numeric) U]B0
]B1
Symbologies Factory
ID AIM ID (new)
EAN 128 T ]C1
Code 128 K ]C0
Code 32 B ]X0
Codabar
Codabar(ABC Codabar)
Codabar(CDV & Send CD)
Codabar(CDV & not send CD)
N
]F0
]F1
]F2
]F4
UK Plessey P ]P0
Matrix 2 of 5 Y ]X0
Full ASCII Code 39(disable CDV)
Full ASCII Code 39(CDV & send CD)
FullASCIICode39(CDV& notsendCD)
D
]A4
]A5
]A7
Standard Code 39(disable CDV)
Standard Code 39(CDV & send CD)
Standard Code 39(CDV & not send CD)
M]A0 ]A1
]A3
IATA 2 of 5 R ]R0
Industrial 2 of 5 V ]S0
China Post Code H ]X0
Interleaved 2 of 5(CDV & send CD)
Interleaved 2 of 5(CDV & not send CD)
Interleaved 2 of 5(disable CDV)
I]I1 ]I3
]I0
6
42 61