Idview Digital IV-8MP180BU User manual

Quick Start Guide
IV-8MP180BU 180°Panoramic Mini Bullet Network Camera
Step1: Connect the cables to the corresponding interface on the rear cover of the Junction Box.
Then fix the rear cover on the position where it is intended to be installed. The rear cover
can be fixed in the following two ways:
① Fix the rear cover directly;
② Fix the rear cover via a bracket;

Quick Start Guide
Note:
The bracket is optional, which can be applied in special scenarios that require screws of larger
sizes.
Step2: When the front cover is correctly fixed to the rear cover, the camera will be powered on by
contact power supply. Adjust shooting direction and rotate locking ring.
Note:
Loosen the screws of SD card structure to get access to the SD card slot if you need. Fix the screws
again after inserting the SD card to complete the operation.