IEI Technology HYPER-BW User manual

1
Pico-ITX SBC with Intel® 14nm Pentium®/Celeron® on-board SoC
with dual Mini HDMI, M.2 2242, GbE, USB 3.0, SATA 6Gb/s,
COM, Audio and RoHS
HYPER-BW
Quick Installation Guide
Version 1.0
Dec 12, 2017
Package List
HYPER-BW package includes the following items:
1 x HYPER-BW single board computer
1 x RS-232 cable
1 x SATA with power cable kit
1 x One Key Recovery CD
1 x QIG (Quick Installation Guide)
1 x Utility CD
©2017 Copyright by IEI Integration Corp.
All rights reserved.

2
Specifications
SoC:
Intel® Pentium® N3710 on-board SoC
(up to 2.56GHz, quad-core, 2MB cache, TDP=6W)
Intel® Celeron® N3160 on-board SoC
(up to 2.24GHz, quad-core, 2MB cache, TDP=6W)
Intel® Celeron® N3060 on-board SoC
(up to 2.48GHz, dual-core, 2MB cache, TDP=6W)
Intel® Celeron® N3010 on-board SoC
(up to 2.24GHz, dual-core, 2MB cache, TDP=4W)
Intel® Celeron® x5-E8000 on-board SoC
(up to 2.00GHz, quad-core, 2MB cache, TDP=5W)
BIOS:AMI UEFI BIOS
Memory:
One 204-pin 1333/1600 MHz single-channel DDR3L SDRAM
unbuffered SO-DIMM slot support up to 8 GB
Graphics Engine:
Intel® HD Graphics Gen 8 Engine with 16 low-power execution
units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Display Output:
Dual independent display
2 x Mini HDMI (up to 3840x2160@30Hz)
Ethernet:
LAN1: Realtek RTL8111 controller
External I/O Interfaces:
1 x USB 2.0
1 x USB 3.0
Internal I/O Interfaces:
1 x RS-232 (1x9 pin, P=1.25)
1 x SATA 6G/s with 5V SATA power connector (No RAID)
(SATA port0)
2 x USB 2.0 (2x4 pin, P=2.0)

3
Audio:
1 x HD Audio (2x5 pin)
Front Panel:
1 x Front panel (1x10 pin, power LED, HDD LED, power
buttom, reset buttom)
LAN LED: 1 x LAN LED (1x2 pin)
Expansion :
1 x M.2 2242 (B key)
Fan Connector:
1 x Smart fan connector (1x4 pin)
Power supply:
12V DC input only
1 x Power terminal block (1x2 pin)
Support AT/ATX mode
Power Consumption:
[email protected] (Intel® Pentium® processor N3710 with 8 GB
1600 MHz DDR3L memory)
Watchdog Timer:
Software programmable supports 1~255 sec. system reset
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Operation Humidity: 5% ~ 95%, non-condensing
Vibration: 3G
Dimensions: 100mm x 72mm
Weight(GW/ NW):300g/ 250g
Ordering Information

Pico-ITX SBC with Intel® Pentium® 14nm quad-core N3710 up
HYPER-BW-N4-R10:
to 2.56GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE,
M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS

4

Pico-ITX SBC with Intel® Celeron® 14nm quad-core N3160 up
HYPER-BW-N3-R10:
to 2.24GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE,
M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS

Pico-ITX SBC with Intel® Celeron® 14nm dual-core N3060 up
HYPER-BW-N2-R10:
to 2.48GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE,
M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS

Pico-ITX SBC with Intel® Celeron® 14nm dual-core N3010 up
HYPER-BW-N1-R10:
to 2.24GHz (4W) on-board SoC with dual Mini HDMI, PCIe GbE,
M.2 2242, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS

Pico-ITX SBC with Intel® Celeron® 14nm quad-core x5-E8000
HYPER-BW-E8-ECO-R10:
up to 2.00GHz (5W) on-board SoC with dual Mini HDMI, PCIe
GbE, M.2, USB 3.0, SATA 6Gb/s, COM, Audio, ECO packing
and RoHS
32000-070301-RS:

Dual-port USB cable
Realtek ALC892 7.1 Channel HD Audio peripheral board,RoHS
AC-KIT-892HD-R10:
Jumpers setting and connectors
LABEL FUNCTION
J_ATX_AT1 Select ATX or AT mode
J_CMOS1 CMOS state setting
COM1 External RS-232 Serial Port Connector
F_PANEL1
Front Panel Connector

5
USB_CON1
USB 2.0 and USB 3.0 Connector
USB2 USB 2.0 Connector
JSPI1
BIOS SPI ROM Programming Connector
CPU_FAN1 CPU Fan Connector
LED_LAN1
LAN1 link LED connector
PWR1
+12V DC power input connector
SATA_PWR2 SATA power connector
SATA1
SATA connector
J_AUDIO1 HDA audio Connector
COM1: External RS-232 Serial Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
NDCD1
6
NDSR1
2
NRXD1
7
NRTS1
3
NTXD1
8
NCTS1
4
NDTR1
9
NRI1
5
GND
10
GND
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short 1 - 2
ATX Power Mode (default)
Short 2 - 3
AT Power Mode
J_CMOS1: Clear CMOS Setup
PIN NO.
DESCRIPTION
Open Normal Operation (Default)
Push
Clear CMOS Setup

6
JSPI1: BIOS SPI ROM Programming Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +SPI_VCC 2 SPI_CS0#_CN
3 SPI_SO0_CN 4 SPI_CLK0_CN
5 SPI_SI0_CN 6 GND
USB2: USB 2.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +5V 2 GND
3 USB20_C_N2 4 USB20_C_P3
5 USB20_C_P2 6 USB20_C_N3
7 GND 8 +5V
USB_CON1: USB 2.0 and USB 3.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +5V 2 USB2P0_DM0_L
3 USB2P0_DP0_L 4 GND
5 USB3P0_RXDN0_C 6 USB3P0_RXDP0_C
7 GND 8 USB3P0_TXDN0_C
9 USB3P0_TXDP0_C 10 +5V
11 USB2P0_DM1_L 12 USB2P0_DP1_L
13 GND
F_PANEL1: Front Panel Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 NC 2 PWRBTN_SW
3 GND 4 HDDLED+
5 HDDLED- 6 PWRLED+
7 PWRLED+ 8 GND
9 EXTRST- 10 GND

7
SATA1: SATA connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
SATA_TX0+
3 SATA_TX0- 4 GND
5 SATA_RX0+ 6 SATA_RX0-
7 GND
LED_LAN1: LAN1 link LED connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +3.3VLAN 2 LAN1_LED_LINK#
PWR1: +12V DC power input connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 12V
SATA_PWR2: SATA power connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +5V 2 GND
CPU_FAN1: CPU Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 +12V
3 FANIO1 4 FANOUT1
J_AUDIO1: HDA audio Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
HDA_SYNC
2
HDA_BCLK
3
HDA_SDO
4
HDA_SPKR
5
HDA_SDI0
6
HDA_RST#
7 +5V 8 AGND
9 +12V 10 AGND

8
Board Layout: Jumper and Connector Locations

9
(Unit: mm)