IEI Technology IOWA-MARK User manual

8

1
Half-Size ISA Board, VIA® MARK 533/800MHz,
VGA/LVDS/TTL, LAN, SATA, Audio with on-board 128MB
Memory
IOWA-MARK
Quick Installation Guide
Version 1.1
Feb 15, 2007
Package List
IOWA-MARK package includes the following items:
 1 x IOWA-MARK single board computer
 1 x mini jumper pack
 1 x ATA66/100 flat cable
 2 x SATA cable (SATA version)
 1 x single RS-232 cable
 1 x Audio cable
 1 x SATA Power cable (SATA version)
 1 x KB/MS Y cable
 1 x USB cable
 1 x Utility CD
 1 x QIG
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
 CPU: VIA® MARK 533/800MHz
 System Chipset: VIA® MARK+ VIA®VT82C686B
 BIOS: Award BIOS
 System Memory:
-1x 168-pin PC100/133MHz up to 512MB
-On Board 128MB SDRAM
 Ethernet: 10/100Mbps Realtek RTL8100C Ethernet chipset
 I/O Interface:
4 x USB 1.1
1 x IDE
1 x FDD
1 x LPT
1 x lrDA
2 x SATA with ALI M5283 RAID 0,1 function support.
2 x RS-232
1 x PS/2 for KB/MS
 Audio: Realtek ALC655 with AC’97 codec
 Digital I/O: 8-bit digital I/O, 4-bit input/ 4-bit output
 Display: VGA intergrated in VIA® MARK
24 bits TTL
18-bit dual channel LVDS
 SSD: CF Type II
 WDT: Software Programmable supports 1-255 sec. System reset, by
ICP6629
 Power Supply: 5V Only, AT/ATX support
 Power Consumption:
[email protected],(VIA MARK 800MHz, On board 128MB+ PC133 128MB)
[email protected],(VIA MARK 533MHz, On board 128MB+ PC133 128MB)
 Temperature: Operation:0~60°C(32~140°F)
 Humidity: Operation:5%~95% non-condensing
 Dimension: 185mm x 122mm
 Weight: GW: 1.0Kg

7
Board Layout: Jumper and Connector Locations

6
CN20:TFT LCD Connector
PIN DESCRIPTION PIN DESCRIPTION
1 VCC_FP 2 VCC_FP
3 GROUND 4 GROUND
5 VCC_FP 6 VCC_FP
7 SMB_DATA 8 GROUND
9 TFT_B0 10 TFT_B1
11 TFT_B2 12 TFT_B3
13 TFT_B4 14 TFT_B5
15 TFT_B6 16 TFT_B7
17 TFT_G0 18 TFT_G1
19 TFT_G2 20 TFT_G3
21 TFT_G4 22 TFT_G5
23 TFT_G6 24 TFT_G7
25 TFT_R0 26 TFT_R1
27 TFT_R2 28 TFT_R3
29 TFT_R4 30 TFT_R5
31 TFT_R6 32 TFT_R7
33 GROUND 34 GROUND
35 FPCLK 36 FPVS
37 FPDEN 38 FPHS
39 SMB_CLK 40 ENVEE
CN4:Floppy Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GROUND 2 DEN0
3 GROUND 4 N/C
5 GROUND 6 DEN1
7 GROUND 8 INDEX-
9 GROUND 10 MTR0-
11 GROUND 12 DISKSEL1-
13 GROUND 14 DISKSEL0-
15 GROUND 16 MTR1-
17 GROUND 18 DIR-
19 GROUND 20 STEP-
21 GROUND 22 WDATA-
23 GROUND 24 WGATE-
25 GROUND 26 TRAK0-
27 GROUND 28 WRTPRT-
29 GROUND 30 RDATA-
31 GROUND 32 HDSEL-
33 GROUND 34 DSKCHG-
CN25: External LED Connector
PIN DESCRIPTION
1 PWRBTN
2 +5V
3 GROUND
4 GROUND
5 +5V
6 RESET
7 HDDLED-
8 GROUND

3
Ordering Information
 IOWA-MARK-533-128MB-R11
ISA CPU Card VIA MARK 533MHz, VGA/LVDS/TTL, LAN,Audio with
on board 128MB Memory
 IOWA-MARK-533S-128MB-R11
ISA CPU Card VIA MARK 533MHz, VGA/LVDS/TTL, LAN, SATA,
Audio with on board 128MB Memory
 IOWA-MARK-800-128MB-R11
ISA CPU Card VIA MARK 800MHz, VGA/LVDS/TTL, LAN,Audio
with on board 128MB Memory
 IOWA-MARK-800S-128MB-R11
ISA CPU Card VIA MARK 800MHz, VGA/LVDS/TTL, LAN, SATA,
Audio with on board 128MB Memory
 32200-000017-RS: FDD cable
 19800-000049-RS: LPT cable
Jumpers setting and Connectors
CN1: Extenal: -VCC Power Connector
JP2: Clear CMOS Setup
PIN DESCRIPTION
Short1-2(Default)* Keep CMOS
Setup(Normal Operation)
Short2-3 Clear CMOS Setup
JP3: Power +3.3V & +5V Select
PIN DESCRIPTION
1-2(Default)* +3.3V
2-3 +5V
CN6: Audio Connector (Line out, Line in & MIC in)
PIN DESCRIPTION PIN DESCRIPTION
1 Line Out (Right) 2 Line In (Right)
3 GROUND 4 GROUND
5 Line Out (Left) 6 Line In (Left)
7 GROUND 8 GROUND
9 MIC In 10 NC
CN24: Internal USB 1.1 Connector (2 ports)
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 2 GROUND
3 DATA1- 4 DATA2+
5 DATA1+ 6 DATA2-
7 GROUND 8 VCC
CN28: CPU Fan Connector
PIN DESCRIPTION
1 Rotation Signal
2+5V
3Ground

4
CN9: Audio CD In Connector
PIN DESCRIPTION
1 CD SIGNAL (Left)
2 GROUND
3 GROUND
4 CD SIGNAL (Right)
CN5: IDE Connector (40pin 2.54mm)
PIN DESCRIPTION PIN DESCRIPTION
1 RESET# 2 GROUND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GROUND 20 N/C
21 DRQ 22 GROUND
23 IOW# 24 GROUND
25 IOR# 26 GROUND
27 CHRDY 28 (PULL LOW TO GND)
29 DACK# 30 GROUND
31 INTERRUPT 32 N/C
33 SA1 34 N/C
35 SA0 36 SA2
37 HDC CS1# 38 HDC CS3#
39 HDD ACTIVE# 40 GROUND
CN22: 6-pin Pin Header
Keyboard/Mouse Connector
PIN DESCRIPTION
1 +5V
2 MOUSE DATA
3 MOUSE CLOCK
4 KEYBOARD DATA
5 KEYBOARD CLOCK
6 GROUND
CN19: IrDA Connector
PIN DESCRIPTION
1 VCC
2 N/C
3 IR-RX
4 Ground
5 IR-TX
CN2: Power Connector
PIN DESCRIPTION
1 +5v
2 Ground
3 Ground
4 +12v
CN16: LVDS LCD Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GROUND 2 GROUND
3 LVDSA_Y0+ 4 LVDSA_Y0-
5 LVDSA_Y1+ 6 LVDSA_Y1-
7 LVDSA_Y2+ 8 LVDSA_Y2-
9 LVDSA_CLK+ 10 LVDSA_CLK-
11 N/C 12 N/C
13 GROUND 14 GROUND
15 LVDSB_Y0+ 16 LVDSB_Y0-
17 LVDSB_Y1+ 18 LVDSB_Y1-
19 LVDSB_Y2+ 20 LVDSB_Y2-
21 LVDSB_CLK+ 22 LVDSB_CLK-
23 N/C 24 N/C
25 GROUND 26 GROUND
27 OPTION 28 OPTION
29 VCC_LVDS 30 VCC_LVDS
CN29:PS-ON Connector
PIN DESCRIPTION
1 Ground
2 PS-ON
3 +5V Standby

5
CN3: Parallel Port Connector
PIN DESCRIPTION PIN DESCRIPTION
1 STROBE# 2 AUTO FORM FEED #
3 DATA 0 4 ERROR#
5 DATA 1 6 INITIALIZE
7 DATA 2 8 PRINTER SELECT LN#
9 DATA 3 10 GROUND
11 DATA 4 12 GROUND
13 DATA 5 14 GROUND
15 DATA 6 16 GROUND
17 DATA 7 18 GROUND
19 ACKNOWLEDGE 20 GROUND
21 BUSY 22 GROUND
23 PAPER EMPTY 24 GROUND
25 PRINTER SELECT 26 N/C
CN23: Internal USB 1.1 Connector (2 ports)
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 2 GROUND
3 DATA3- 4 DATA4+
5 DATA3+ 6 DATA4-
7 GROUND 8 VCC
CN17: Internal Serial Port Connectors
PIN DESCRIPTION
1 DATA CARRIER DETECT (DCD)
2 DATA SET READY (DSR)
3 RECEIVE DATA (RXD)
4 REQUEST TO SEND (RTS)
5 TRANSMIT DATA (TXD)
6 CLEAR TO SEND (CTS)
7 DATA TERMINAL READY (DTR)
8 RING INDICATOR (RI)
9 GROUND (GND)
10 GROUND (GND)
CN12: Keyboard / Mouse Connector
PIN DESCRIPTION
1 KEYBOARD DATA
2 MOUSE DATA
3 GROUND
4 +5V
5 KEYBOARD CLOCK
6 MOUSE CLOCK
CN18: 10-pin Digital I/O Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GROUND 2 +5V
3 OUTPUT 0 4 OUTPUT 1
5 OUTPUT 2 6 OUTPUT 3
7 INPUT 0 8 INPUT 1
9 INPUT 2 10 INPUT 3
CN21:Inverter
PowerConnector
PIN DESCRIPTION
1 Ground
2 Ground
3 +12V
4 Ground
5 LCD Enable