IEI Technology KINO-G410-R10 User manual

1
Mini-ITX SBC supports socket LGA775 Intel® Core™ 2 Quad CPU with
1333Mhz FSB, DDR3, VGA, Dual PCIe GbE, six COM, four SATAII and
Audio, ROHS
KINO-G410-R10
Quick Installation Guide
Version 1.0
Nov. 17th, 2010
Package Contents
KINO-G410-R10 package includes the following items:
z1 x KINO-G410-R10 Single Board Computer
z2 x SATA cable
z1 x I/O shielding
z1 x Mini Jumper Pack
z1 x Utility CD
z1 x One key Recovery Utility CD
z1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
zCPU
LGA775 45nm Intel® Core™2 Quad, Core™2 Duo, Pentium® D,
Celeron® at FSB 800/1066/1333MHz processors
zSystem Chipset
Intel® G41 + ICH7
zGraphic Engine
Intel® GMA X4500
zBIOS
UEFI BIOS
zSystem memory
Two 240-pin 800/1066MHz Dual-Channel DDR3 SDRAM DIMM
supported (system max. 8GB)
zEthernet
Dual Realtek RTL8111E PCIe GbE Controllers with ASF2.0 support
zI/O Interface
4 x SATA II
8 x USB 2.0
5 x RS-232
1 x RS-232/422/485
1 x PS/2 KB/MS
1 x LPT
zExpansions
1 x PCIe x16 slot
zAudio
Realtek ALC888 HD Audio Codec
zDigital I/O: 8-bit digital I/O, 4-bit input/ 4-bit output
zSuper I/O: FINTEK F81865F
zTPM(optional)
On board Infineon SLB9635TT1.2
zDisplay Interface:
VGA Integrated in the Intel® G41, 24-bit LVDS by VGA-LVDS-R10
zWatchdog timer:

3
Software programmable supports 1~255 sec. system reset
zPower Supply: ATX power supply
zPower Consumption:
[email protected], [email protected], 3.3V@0.27A
(2.8GHz Intel® Core™2 Duo E7400 with 1GBx2 DDR3 1066MHz)
zHumidity: Operation: 5% ~ 95%, non-condensing
zTemperature: -10°C ~ 60°C
zDimension: 170 mm x 170 mm
zWeight: GW: 1100g; NW: 700g
Ordering Information
KINO-G410-R10:
Mini-ITX SBC supports socket LGA775 Intel® Core™ 2 Quad CPU with
1333MHz FSB, DDR3, VGA, Dual PCIe GbE, 6 COM, 4 SATAII and Audio,
ROHS
KINO-G410T-R10:
Mini-ITX SBC supports socket LGA775 Intel® Core™ 2 Quad CPU with
1333MHz FSB, DDR3, VGA, Dual PCIe GbE, 6 COM, 4 SATAII and Audio,
TPM, ROHS
CB-USB02-RS: Dual Ports USB Cable with Bracket
32102-000100-200-RS: SATA power cable
CF-775A-RS:CPU cooler for 130W
CF-775B-RS:CPU cooler for 90W
CF-520-RS-R11:CPU cooler for 115W
32200-015100-RS: LPT cable
32205-000300-100-RS: RS-232/422/485 cable
19800-000112-RS:Dual RS-232 cable with Bracket
VGA-LVDS-R10: VGA to 24-bit dual channel LVDS Converter Module
Jumpers setting
LABEL FUNCTION
J_CMOS1 CMOS state setting
JP2 COM6 Port Mode setting
J_CMOS1: Clear CMOS Setup
J_CMOS1 DESCRIPTION
Short 1-2 (default) Keep CMOS Setup(default)
Short 2-3 Clear CMOS Setup

4
JP2: COM6 Mode Selection
JP2 DESCRIPTION
Short 1-2(default) RS – 232(default)
Short 3-4 RS - 422
Short 5-6 RS – 485
short 5-6 and7-8 RS485 with RTS control
Table of Connectors
LABEL FUNCTION
KB_MS1 PS/2 MOUSE & KEYBOARD Connectors
VGA1 VGA 15-pin Connector
LAN1
LAN2 RJ45 LAN Connectors
USB01
USB23 External USB Connectors
USB45
USB67 Internal USB Pin Headers
AUDIO_CV1 Audio Connector
CPU12V1 Power Input Connector
ATX1 Internal ATX power Input Connector
COM1,2,3 COM 9pin Connector
COM4,5 Internal Serial Pin Header (RS-232)
COM6 Internal Serial Pin Header (RS-232/422/485)
LPT1 LPT Connector
JP4 VGA-LVDS Connector
CPU_FAN1 CPU Fan Connector
SYS_FAN1 System Fan Connector
F_PANEL1 External Switches and Indicators pin header
JSPI1 SPI flash connector
DIO1 Digital Input and Output Connector
SATA1,2,3,4 Serial ATA Connectors
BAT1 BIOS battery Connector
CN1 SMBUS CONNECTOR
PCIEX16_1 PCIEX16 slot
DIMM1
DIMM2 204pin DDR3 Female slots

5
V
GA1: External 15-pin Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RED 2 GREEN
3 BLUE
4
NC
5 GND 6 GND
7 GND 8 GND
9
V
CC 10 CRT_PLUG#
11 NC 12 DDC_DATA
13 HSYNC 14
V
SYNC
15 DDC_CLK
KBMS1: PS/2 KB/MS Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 KB_DATA
2
NC
3 GND
4
KBPWR
5 KB_CLK 6 NC
7 MS_DATA 8 NC
9 GND 10 KBPWR
11 MS_CLK 12 NC
13 KB_GND 14 KB_GND
COM1,2,3 : Serial port connector.( D-SUB)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 DCD
2
RX
3
T
X
4
DTR
5 GND 6 DSR
7 RTS 8 CTS
9 RI1
COM4,COM5: Internal Serial Pin Header (RS-232)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 DCD
2
DSR
3 RXD
4
RTS
5
T
XD 6 CTS
7 DTR 8 RI
9 GND 10 NC

6
COM6: Serial port connector,RS-232/422/485
PIN DESCRIPTION PIN DESCRIPTION
1 DCD 2 DSR
3 RXD
4
RTS
5
T
XD 6 CTS
7 DTR 8 RI
9 GND 10 GND
11 RS422 TX2+/RS485+ 12 RS422 TX2-/RS485-
13 RS422 RX2- 14 RS422 RX2-
AUDIO_1: AUDIO Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 Line out_R 2 Line in_R
3 GND 4 GND
5 Line out_L 6 Line in_L
7 GND 8 GND
9 MIC_R 10 MIC_L
LAN1, LAN2: RJ45 LAN Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 3.3V
2
MDI
A
0+
3 MDI
A
0-
4
MDI
A
1+-
5 MDI
A
1- 6 MDI
A
2+
7 MDI
A
2- 8 MDI
A
3+
9 MDI
A
3- 10 GND
USB0_1,USB2_3: USB Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC (+5V) 5 VCC (+5V)
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GND 8 GND
BAT1: +3V Battery Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 BAT (+3V) 2 GND

7
USB4_5,USB6-7: USB Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +5V 2 GND
3 USB- 4 USB+
5 USB+ 6 USB-
7 GND 8 +5V
CPU12V1: Power input connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 +12V 4 +12V
ATX1: ATX POWER Input Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 5V 16 PS_ON-
5 GND 17 GND
6 5V 18 GND
7 GND 19 GND
8 NC 20 NC
9 5VSB 21 5V
10 12V 22 5V
11 12V 23 5V
12 3.3V 24 GND
F_PANEL1: External Switches and Indicators pin header
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 ACPILED 2 BEEP_PWR
3 NC 4
NC
5 GND 6
NC
7 -PWRBTSW 8 PC_BEEP
9 GND 10 NC
11 HDLED 12 EXTRST-
13 HDLED 14 GND

8
LPT1: LPT Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 STB 2
A
FD
3 PTD0
4
ERR
5 PTD1 6 INITR
7 PTD2 8 SLIN
9 PTD3 10 GND
11 PTD4 12 GND
13 PTD5 14 GND
15 PTD6 16 GND
17 PTD7 18 GND
19 -ACK 20 GND
21 BUSY 22 GND
23 PE 24 GND
25 SLCT 26 NC
J
P4: VGA-LVDS Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 +5V
3 H-SYN
4
Unpugged
5
V
-SYN 6 +5V
7 GND 8 GND
9 RED 10 +3.3V
11 GREEN 12 +3.3V
13 BULE 14 +3.3V
15 GND 16 GND
17 5VDDC_DATA 18 +12V
19 5VDDC_CLK 20 +12V
SYS_FAN1: System Fan Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 FAN_IN 2
V
CC_FAN
3 GND

9
CPU_FAN1:CPU Fan Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 12V
3 FAN_IN
4
FANCTL
JSPI1:Flash Bios Pin Header
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 CS# 2 SO
3 WP# 4 GND
5 SI 6 CLK
7 HOLD 8 3.3V
DIO1:Digital Input and Output Pin Header
PIN NO DESCRIPTION PIN NO. DESCRIPTION
1 GND 2
V
CC5S
3 GPO3
4
GPO2
5 GPO1 6 GPO0
7 GPI3 8 GPI2
9 GPI1 10 GPI0
SATA1,2,3,4:Serial ATA Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 TXP
3
T
XN
4
GND
5 RXN 6 RXP
7 GND
CN1:SMBUS CONNECTOR
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND
2
S_DATA
3 S_CLK
4
+5V

10
Board Layout: Dimensions

11
Board Layout: Jumper and Connector Locations