IEI Technology SPCIE-C236 User manual

1
Full-size PICMG 1.3 CPU Card supports LGA1151 Intel E3-1200/Core™
i3/Pentium®/Celeron® CPU per Intel® C236, DDR4, VGA/IDP,
Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s,
HD Audio, iAMT, and RoHS
SPCIE-C236
Quick Installation Guide
Version 1.0
Jul 27, 2016.
Package List
SPCIE-C236 package includes the following items:
1 x SPCIE-C236 single board computer
1 x SATA cable (P/N: 32000-0628000-RS)
1 x Mini jumper pack
1 x QIG (Quick Installation Guide)
1 x Utility CD
©2016 Copyright by IEI Integration corp.
All rights reserved.

2
Specifications
CPU:
LGA1151 Intel® E3-1200/Core™ i3/Pentium®/Celeron®
processor supported
PCH:Intel® C236
Memory:
Four 288-pin 2133/1867MHz dual-channel DDR4 SDRAM
unbuffered DIMMs support ECC & non-ECC up to 64GB
(C236)
BIOS: UEFI BIOS
Graphic Engine:
Intel® HD Graphics Gen 9 supports DX11/12, OpenCL 2.x and
OpenGL 4.3/4.4 Decode/Encode for HEVC, VP8, VP9,
VDENC
Ethernet:
LAN1: Intel® I219LM Clarkville-V with Intel® iAMT 11.0
supported
LAN2: Intel® I210 PCIe controller
Super IO: Fintek F81866
EC:IWDD
External I/O:
2 x USB 3.0
2 x RJ-45
1 x VGA
Internal I/O:
1 x 6-pin wafer for KB/MS
1 x iDP
1 x LPT
6 x SATA3.0 (SATA0, SATA1,SATA2, SATA3) (C236supports
RAID 0, 1, 5 , 10)
7 x USB 2.0 (1 type A 180°, 6 by pin header)
2 x RS-232
2 x RS-232/422/485

3
2 x USB 3.0 (4 pin header)
Front Panel: 1 x Front Panel (Power LED, HDD LED, Speaker,
Power Button, Reset Button)
LAN LED:2 x 2 Pin for LAN1 LED, LAN2 LED (Active)
Audio: Support 7.1 channel HD audio by IEI AC-KIT-892HD kit
TPM:1 x 20-pin (2x10) header
SMBus:1 x 4-pin (1x4) wafer
I2C:1 x 4-pin (1x4) wafer
Infrared Interface:1 x 5-pin (1x5) header
iRIS Remote Management Module:
1 x iRIS-2400 slot (optional)
Expansion:
16 lanes from CPU & 4 lanes from C236 PCIe signal via
golden finger
Four PCI signal via golden finger
1 x PCIe mini (support PCIE or mSATA colay with SATA6)
Watchdog Timer:
Software programmable support 1~255 sec. system reset
Digital I/O:8-bit digital I/O (4-bit input / 4-bit output)
Fan Connector:
1 x 4-pin smart fan connector (CPU fan)
1 x 4-pin smart fan connector (system fan)
Power supply:
5V/12V, AT/ATX support
Power Consumption:
[email protected], 12[email protected]A, 3.3V@1.21A, 5VSB@0.16A
(Intel® E3-1275 v5 3.6GHz CPU with 64GB (16GB x 4) 2133
MHz DDR4 memory)
Operation Temperature: -20°C ~ 60°C
Operation Humidity: 10% ~ 95%, non-condensing
Dimensions: 338mm x 126mm
Weight GW/NW: 1000g / 420g

4
Ordering Information
Full-size PICMG 1.3 CPU Card supports LGA1151 Intel® E3- SPCIE-C236-R10:
1200/Core™ i3/Pentium®/Celeron® CPU per Intel® C236,
DDR4, VGA/IDP, Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s,
HD Audio, iAMT and RoHS
Full-size PICMG 1.3 CPU Card supports LGA1151 Intel® E3-
SPCIE-C236-i2-R10:
1200/Core™ i3/Pentium®/Celeron® CPU per Intel® C236,
DDR4, VGA/IDP, Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s,
PCIe mini, mSATA, HD Audio, iAMT, iRIS-2400 and RoHS
19800-000075-RS:
KB/MS cable with Bracket 32102-000100-200-RS:
SATA Power Cable 32200-015100-RS:
LPT Cable 32200-074800-RS:
RS-422/485 cable, 200mm AC-KIT-892HD-R10:
7.1 channel HD Audio kit with Realtek ALC892 support dual
audio streams
CF-1150SA-R10:
compatible, 95W Special cooler kit for LGA1150, High-performance
CF-1150SB-R10:
compatible, 65W Special cooler kit for LGA1150, High-performance
CF-1150SC-R10:
Special cooler kit for LGA1150, 1U chassis compatible, 65W
CF-1150SE-R11:
Special cooler kit for LGA1150, 1U chassis compatible, 95W
CF-1150SF-R10:
Special cooler kit for LGA1150, 1U chassis compatible, 54W
DP-DP-R10:
DisplayPort to DisplayPort converter board (For iEi IDP connector)
DP-DVI-R10:
DisplayPort to DVI-D converter board (For iEi IDP connector)

5
DP-HDMI-R10:
DisplayPort to HDMI converter board (For iEi IDP connector)
DP-LVDS-R10:
DisplayPort to LVDS converter board (For iEi IDP connector)
DP-VGA-R10:
DisplayPort to VGA converter board (For iEi IDP connector)
SAIDE-KIT01-R10:
SATA to IDE/CF Converter board

6
Jumpers setting and connectors
LABEL FUNCTION
J_ATX_AT1 AT/ATX mode select switch
J_CMOS1 Clear CMOS button
PCIE x16 Power PCIEX16 channel mode setting
USB SW1, USB SW2 USB power setting
MSATA_SW1 M-SATA switch auto-detect
J_FLASH1 Flash descriptor security override
SW_BIOS1_2
Switch BIOS1 or BIOS2 (option function)
J_AUDIO1 Audio source connector
CHASSIS1 Chassis status connector
CPU_FAN1 CPU fan connector
CPU12V1 +12V power connector
CHA_DIMM0, CHA_DIMM1
CHB_DIMM0, CHB_DIMM1
DDR3 DIMM slots
DIO1 Digital I/O connector
DP1 Display port connector
CN1 EC debug connector
F_PANEL1 Front panel connector
IPMI1 Collocation IPMI module (iRIS-2400)
I2C1 I2C Connector
KB_MS1 Keyboard and mouse connector
LED_LAN1 LAN1 link LED connector
LED_LAN2 LAN2 link LED connector
LPT1 Internal Parallel port connector
MPCIE1 M-SATA card connector
COM1, COM2 RS-232 serial port connector
COM3, COM4 Internal RS-232/422/485 serial port connector
SATA1, SATA2, SATA3
SATA4, SATA5, SATA6
SATA 6Gb/s drive connectors
SMB1 SMBUS connector
JSPI1 Flash SPI ROM connector
JSPI2 Flash EC ROM connector
SYS_FAN1 System fan connector

7
TPM1 TPM connector
USB1, USB2, USB3 Internal USB 2.0 connectors
USB4
External USB 2.0 type A Connector
USB3_34 Internal USB 3.0 connector
LAN1, LAN2
RJ45 LAN connectors
USB3_1,USB3_2 USB 3.0 ports
VGA1 VGA connector
PCIE x16 Power: PCIEX16 channel mode setting
PCIE x16 DESCRIPTION
1 x16 PCIE 1 x16 PCIE (default)
2 x8 PCIE 2 x8 PCIE
1 x8 , 2x4 PCIE
1 x8 , 2x4 PCIE
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled(ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP) [Disabled]
PCIEX16 Power [1 x16 PCIE]
USB SW1 [+5V DUAL]
USB SW2 [+5V DUAL]
------------------
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
J_CMOS1: Clear CMOS button
PIN NO. DESCRIPTION
NC (default)
Keep CMOS Setup
(Normal Operation)
Press button
Clear CMOS Setup
J_ATX_AT1: AT/ATX mode select switch
PIN NO.
DESCRIPTION
Short 1 - 2
ATX Mode (default)
Short 2 - 3
AT Mode

8
SW_BIOS1_2 : Switch BIOS1 or BIOS2 (option function)
PIN NO.
DESCRIPTION
Short 1 - 2
BIOS1 (default)
Short 2 - 3 BIOS2
USB SW1, USB SW2: USB power setting
PCIE x16
DESCRIPTION
+5V DUAL 5V DUAL (default)
+5V
+5V
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled(ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP) [Disabled]
PCIEX16 Power [1 x16 PCIE]
USB SW1 [+5V DUAL]
USB SW2 [+5V DUAL]
------------------
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
J_FLASH1: Flash descriptor security override
PIN NO.
DESCRIPTION
Short 1 - 2
Disabled (default)
Short 2 - 3
Enabled
MSATA_SW1: M-SATA switch auto-detect
PIN NO.
DESCRIPTION
Open
Auto Detect M-SATA (default)
Short
M-SATA Enable

9
CHASSIS1: Chassis status connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3VSB
2
CHASSIS OPEN
J_AUDIO1: Audio source connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
HDA_SYNC
2
HDA_BIT_CLK
3
HDA_SDOUT
4
HDA_SPKR
5
HDA_SDIN
6
HDA_RST#
7
HDA_VCC
8
HDA_GND
9
HDA_+12V
10
HDA_GND
CPU12V1: +12V
p
ower
c
onnector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
GND
3
+12V
4
+12V
CPU_FAN1: CPU fan connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND
2
+12V
3
FANIO
4
PWM
DIO1: Digital I/O connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
VCC
3
Output 3
4
Output 2
5
Output 1
6
Output 0
7
Input 3
8
Input 2
9
Input 1
10
Input 0

10
F_PANEL1: Front panel connector
PIN
DESCRIPTION
PIN
DESCRIPTION
PWR
LED
1
+5V
2
BEEP_PWR
SPKR
3
NC
4
IPMI ID_LED+
IPMI LED
5
GND
6
IPMI ID_LED-
PWR
BTN
7
PWRBTN_SW#
8
PC_BEEP
SPKR
9
GND
10
NC
RESET
HDD
LED
11
+5V
12
EXTRST-
13
SATA_LED#
14
GND
DP1: Display port connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +5V 11 AUXP
2 LANE1N 12 AUXN
3 LANE1P 13 GND
4 GND 14 LANE2P
5 LANE3N 15 LANE2N
6 LANE3P 16 GND
7 GND 17 LANE0P
8 AUX_CTRL_DET_D 18 LANE0N
9 GND 19 +3.3V
10 HPD
CN1: EC debug connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
EC_EPP_STB#
2
EC_EPP_AFD#
3
EC_EPP_PD0
4
NC
5
EC_EPP_PD1
6
EC_EPP_INIT#
7
EC_EPP_PD2
8
EC_EPP_SLIN#
9
EC_EPP_PD3
10
GND
11
EC_EPP_PD4
12
NC
13
EC_EPP_PD5
14
EC_EPP_BUSY
15
EC_EPP_PD6
16
EC_EPP_KSI5
17
EC_EPP_PD7
18
EC_EPP_KSI4

11
LED_LAN2: LAN2 link LED connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
LAN2_LED_LNK#_ACT
LED_LAN1: LAN1 link LED connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
LAN1_LED_LNK#_ACT
LPT1: Parallel port connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 STROBE# 14 AUTO FORM FEED #
2 DATA0 15 ERROR#
3 DATA1 16 INITIALIZE#
4 DATA2 17 PRINTER SELECT LN#
5 DATA3 18 GND
6 DATA4 19 GND
7 DATA5 20 GND
8 DATA6 21 GND
9 DATA7 22 GND
10 ACKNOWLEDGE# 23 GND
11 BUSY 24 GND
12 PAPER EMPTY 25 GND
13 PRINTER SELECT
I2C1: I2C Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
GND 2 PCH_GP38 (I2C_DAT)
3
PCH_GP39 (I2C_CLK) 4 +5V
KB_MS1: Keyboard and mouse connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
2
MSDATA
3
MSCLK
4
KBDATA
5
KBCLK
6
GND

12
MPCIE1: M-SATA card connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
PCIE_WAKE#
2
+3.3V
3
N/C
4
GND
5
N/C
6
1.5V
7
N/C
8
N/C
9
GND
10
N/C
11
MSATA_CLK#
12
N/C
13
MSATA _CLK
14
N/C
15
GND
16
N/C
17
PLTRST_N
18
GND
19
N/C
20
+3.3V
21
GND
22
PLTRST_N
23
SATA_RX+
24
+3.3V
25
SATA_RX-
26
GND
27
GND
28
1.5V
29
GND
30
SMB_CLK
31
SATA_TX-
32
SMB_DATA
33
SATA_TX+
34
GND
35
GND
36
USB_DATA-
37
GND
38
USB_DATA+
39
+3.3V
40
GND
41
+3.3V
42
N/C
43
+3.3V
44
N/C
45
CLINK_CLK
46
N/C
47
CLINK_DATA
48
1.5V
49
CLINK_RST#
50
GND
51
MSATA_DET
52
+3.3V

13
COM3, COM4: RS-232/422/485 serial port connector
PIN NO.
RS-232
RS-422
RS-485
1 DCD TXD422- TXD485-
2 RXD TXD422+ TXD485+
3 TXD RXD422+ --
4 DTR RXD422- --
5
GND
--
--
6 DSR -- --
7
RTS
--
--
8
CTS
--
--
9
RI
--
--
SATA1, SATA2, SATA3, SATA4, SATA5, SATA6: SATA 6Gb/s drive
connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 5 SATA_RX-
2 SATA_TX+ 6 SATA RX+
3 SATA_TX- 7 GND
4 GND 8 N/C
COM1, COM2: RS-232 serial port connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DCD
2
DSR
3
RXD
4
RST
5
TXD
6
CTS
7
DTR
8
RI
9
GND
10
GND

14
SYS_FAN1: System fan connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
FANIO
2
+12V (PWM)
3
GND
JSPI2: Flash EC ROM connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
SPI_CS#
3
SPI_SO
4
NC
5
GND
6
SPI_CLK
7
SPI_SI
8
NC
JSPI1: Flash SPI ROM connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+3.3V
2
SPI_CS#
3
SPI_SO
4
NC
5
GND
6
SPI_CLK
7
SPI_SI
8
NC
SMB1: SMBUS connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
SMB_DATA
3
SMB_CLK
4
+5V

15
USB4: External USB 2.0 type A Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
2
DATA-
3
DATA+
4
GND
USB3_1, USB3_2: USB 3.0 connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VBUS 2 D-
3 D+ 4 GND
5 STDA_SSRX_N 6 STDA_SSRX_P
7 GND_DRAIN 8 STDA_SSTX_N
9 STDA_SSTX_P
USB1, USB2, USB3: Internal USB 2.0 connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VCC 2 GND
3 USB_DATA- 4 USB_DATA+
5 USB_DATA+ 6 USB_DATA-
7 GND 8 VCC
TPM1: TPM connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
LCLK
2
GND
3
LFRAME#
4
KEY
5
LRERST#
6
+5V
7
LAD3
8
LAD2
9
+3.3V
10
LAD1
11
LAD0
12
GND
13
SCL
14
SDA
15
SB3V
16
SERIRQ
17
GND
18
GLKRUN#
19
LPCPD#
20
LDRQ#

16
LAN1, LAN2: RJ45 LAN connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 MDIA3- 5 MDIA1+
2 MDIA3+ 6 MDIA2+-
3. MDIA2- 7 MDIA0-
4. MDIA1- 8 MDIA0+
USB3_34 : Internal USB 3.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VCC 11 USB_DATA+
2 USB3_RX- 12 USB_DATA-
3 USB3_RX+ 13 GND
4 GND 14 USB3_TX+
5 USB3_TX- 15 USB3_TX-
6 USB3_TX+ 16 GND
7 GND 17 USB3_RX+
8 USB_DATA- 18 USB3_RX-
9 USB_DATA+ 19 VCC
10 NC
VGA1: VGA connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
RED
2
GREEN
3 BLUE 4 NC
5 GND 6 GND
7
GND
8
GND
9
VCC
10
GND
11 NC 12 DDCDA
13 HSYNC 14 VSYNC
15
DDCCLK

17
Board Layout: Jumper and Connector Locations
(Unit: mm)