IEI Technology NANO-BT Series User manual

NANO-BT EPIC SBC
Page i
User Manual
MODEL:
NANO-BT Series
EPIC SBC with 22nm Intel® Atomor Celeron
®
SoC,
Dual GbE, DDR3, HDMI, VGA, LVDS, USB 2.0/3.0, COM Ports
Two SATA 3Gb/s Ports, IPMI 2.0 and RoHS
Rev. 1.10 – May 28, 2015

NANO-BT EPIC SBC
Page ii
Revision
Date Version Changes
May 28, 2015 1.10 Updated for R11 version
October 1, 2014 1.03 Updated Section 1.6: Dimensions
June 27, 2014 1.02 Updated supported memory specifications in Chapter 1.
May 7, 2014 1.01 Updated Section 1.6: Dimensions
Updated Chapter 6: Software Drivers
Updated Table 3-15: LVDS Connector Pinouts
April 3, 2014 1.00 Initial release

NANO-BT EPIC SBC
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

NANO-BT EPIC SBC
Page iv
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 MODEL VARIATIONS ................................................................................................... 3
1.3 BENEFITS ................................................................................................................... 4
1.4 FEATURES................................................................................................................... 4
1.5 CONNECTORS ............................................................................................................. 5
1.6 DIMENSIONS............................................................................................................... 7
1.7 DATA FLOW................................................................................................................ 9
1.8 TECHNICAL SPECIFICATIONS .................................................................................... 10
2 PACKING LIST........................................................................................................... 13
2.1ANTI-STATIC PRECAUTIONS...................................................................................... 14
2.2 UNPACKING PRECAUTIONS....................................................................................... 14
2.3 PACKING LIST........................................................................................................... 15
2.4 OPTIONAL ITEMS...................................................................................................... 16
3 CONNECTORS ........................................................................................................... 17
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 18
3.1.1 NANO-BT Layout............................................................................................. 18
3.1.2 Peripheral Interface Connectors ..................................................................... 19
3.1.3 External Interface Panel Connectors............................................................... 21
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 21
3.2.1 +12 V Power Connector.................................................................................. 21
3.2.2 Audio Connector .............................................................................................. 22
3.2.3 Battery Connector............................................................................................ 23
3.2.4 Backlight Inverter Connector .......................................................................... 24
3.2.5 Buzzer Connector............................................................................................. 25
3.2.6 Chassis Intrusion Connector............................................................................ 26
3.2.7 Digital I/O Connector...................................................................................... 26
3.2.8 Fan Connector (CPU)...................................................................................... 27
3.2.9 Fan Connector (System) .................................................................................. 28

NANO-BT EPIC SBC
Page v
3.2.10 Front Panel Connector .................................................................................. 29
3.2.11 IPMI LED Connector..................................................................................... 30
3.2.12 iRIS Module Slot (NANO-BT-i1 Models Only).............................................. 31
3.2.13 LAN LED Connectors.................................................................................... 32
3.2.14 LVDS Connector ............................................................................................ 33
3.2.15 Memory Card Slot.......................................................................................... 34
3.2.16 microSD Card Slot (E38xx Models Only)...................................................... 35
3.2.17 PCI-104 Connector........................................................................................ 35
3.2.18 PCIe Mini Card Slot ...................................................................................... 37
3.2.19 Power Button Connector................................................................................ 39
3.2.20 Power Button ................................................................................................. 39
3.2.21 Reset Button Connector ................................................................................. 40
3.2.22 SATA 3Gb/s Drive Connectors....................................................................... 41
3.2.23 SATA Power Connectors................................................................................ 42
3.2.24 Serial Port Connectors, RS-232..................................................................... 42
3.2.25 Serial Port Connector, RS-422/485................................................................ 43
3.2.26 SMBus Connector .......................................................................................... 44
3.2.27 SPI Flash Connector...................................................................................... 45
3.2.28 SPI Flash Connector, EC............................................................................... 46
3.2.29 USB 2.0 Connector ........................................................................................ 47
3.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 48
3.3.1 Ethernet Connectors ........................................................................................ 49
3.3.2 HDMI Connector............................................................................................. 50
3.3.3 Keyboard/Mouse Connector ............................................................................ 51
3.3.4 USB 2.0 Connector .......................................................................................... 52
3.3.5 USB 3.0 Connector .......................................................................................... 52
3.3.6 VGA Connector................................................................................................ 53
4 INSTALLATION ......................................................................................................... 54
4.1ANTI-STATIC PRECAUTIONS...................................................................................... 55
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 55
4.2.1 SO-DIMM Installation..................................................................................... 57
4.2.2 iRIS-1010 Module Installation (Optional)....................................................... 57
4.2.3 PCIe Mini Card Installation ............................................................................ 59
4.3 SYSTEM CONFIGURATION......................................................................................... 59

NANO-BT EPIC SBC
Page vi
4.3.1 AT/ATX Power Mode Setting ........................................................................... 59
4.3.2 Clear CMOS Button......................................................................................... 60
4.3.3 LVDS Panel Resolution Selection.................................................................... 61
4.3.4 LCD Voltage Selection..................................................................................... 62
4.3.5 mSATA/SATA Selection..................................................................................... 63
4.3.6 PCI-104 Voltage Selection............................................................................... 64
4.3.7 USB Power Select............................................................................................ 64
4.4 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 65
4.4.1 AT Power Connection ...................................................................................... 65
4.4.2 SATA Drive Connection ................................................................................... 66
4.4.3 Single RS-232 Cable Connection..................................................................... 67
4.5 IPMI SETUP PROCEDURE (FOR NANO-BT-I1MODELS ONLY)................................. 68
4.5.1 Managed System Hardware Setup................................................................... 68
5 BIOS.............................................................................................................................. 69
5.1 INTRODUCTION......................................................................................................... 70
5.1.1 Starting Setup................................................................................................... 70
5.1.2 Using Setup...................................................................................................... 70
5.1.3 Getting Help..................................................................................................... 71
5.1.4 Unable to Reboot after Configuration Changes.............................................. 71
5.1.5 BIOS Menu Bar................................................................................................ 71
5.2 MAIN........................................................................................................................ 72
5.3ADVANCED............................................................................................................... 73
5.3.1 ACPI Settings................................................................................................... 74
5.3.2 F81866 Super IO Configuration...................................................................... 75
5.3.2.1 Serial Port n Configuration....................................................................... 75
5.3.3 iWDD H/W Monitor......................................................................................... 80
5.3.3.1 Smart Fan Mode Configuration................................................................ 81
5.3.4 RTC Wake Settings........................................................................................... 83
5.3.5 Serial Port Console Redirection ...................................................................... 84
5.3.6 IEI Feature....................................................................................................... 87
5.3.7 CPU Configuration.......................................................................................... 88
5.3.8 IDE Configuration........................................................................................... 90
5.3.9 USB Configuration........................................................................................... 91
5.4 CHIPSET ................................................................................................................... 92

NANO-BT EPIC SBC
Page vii
5.4.1 North Bridge .................................................................................................... 93
5.4.1.1 Intel IGD Configuration............................................................................ 93
5.4.2 South Bridge..................................................................................................... 96
5.4.2.1 PCI Express Configuration....................................................................... 97
5.5 SECURITY................................................................................................................. 98
5.6 BOOT........................................................................................................................ 99
5.7 EXIT....................................................................................................................... 101
6 SOFTWARE DRIVERS............................................................................................ 103
6.1 SOFTWARE INSTALLATION ...................................................................................... 104
6.2AVAILABLE SOFTWARE DRIVERS ............................................................................ 106
A REGULATORY COMPLIANCE............................................................................ 108
B BIOS OPTIONS .........................................................................................................113
C TERMINOLOGY ......................................................................................................116
D WATCHDOG TIMER .............................................................................................. 120
E DIGITAL I/O INTERFACE..................................................................................... 123
E.1 INTRODUCTION ...................................................................................................... 124
E.2ASSEMBLY LANGUAGE SAMPLE 1.......................................................................... 125
E.3ASSEMBLY LANGUAGE SAMPLE 2.......................................................................... 125
F HAZARDOUS MATERIALS DISCLOSURE........................................................ 126
F.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY..................................... 127

NANO-BT EPIC SBC
Page viii
List of Figures
Figure 1-1: NANO-BT......................................................................................................................2
Figure 1-2: Connectors (Front Side).............................................................................................5
Figure 1-3: Connectors (Solder Side)...........................................................................................6
Figure 1-4: NANO-BT Main Dimensions (mm).............................................................................7
Figure 1-5: NANO-BT Height Dimensions 1 (mm).......................................................................8
Figure 1-6: NANO-BT Height Dimensions 2 (mm).......................................................................8
Figure 1-7: Data Flow Diagram......................................................................................................9
Figure 3-1: Connectors and Jumpers (Front Side) ...................................................................18
Figure 3-2: Connectors and Jumpers (Solder Side) .................................................................19
Figure 3-3: CPU Power Connector Location..............................................................................22
Figure 3-4: Audio Connector Location.......................................................................................23
Figure 3-5: Battery Connector Location.....................................................................................24
Figure 3-6: Backlight Inverter Connector Location...................................................................24
Figure 3-7: Buzzer Connector Location .....................................................................................25
Figure 3-8: Chassis Intrusion Connector Location...................................................................26
Figure 3-9: Digital I/O Connector Location ................................................................................27
Figure 3-10: CPU Fan Connector Location................................................................................28
Figure 3-11: System Fan Connector Location...........................................................................29
Figure 3-12: Front Panel Connector Location ...........................................................................30
Figure 3-13: IPMI LED Connector Location ...............................................................................31
Figure 3-14: iRIS Module Slot Location......................................................................................32
Figure 3-15: LAN LED Connector Locations .............................................................................32
Figure 3-16: LVDS Connector Location......................................................................................33
Figure 3-17: Memory Card Slot Location ...................................................................................34
Figure 3-18: microSD Card Slot Location..................................................................................35
Figure 3-19: PCI-104 Connector Location..................................................................................36
Figure 3-20: PCIe Mini Card Slot Location.................................................................................37
Figure 3-21: Power Button Location...........................................................................................39
Figure 3-22: Power Button Location...........................................................................................40
Figure 3-23: Reset Button Connector Location.........................................................................40

NANO-BT EPIC SBC
Page ix
Figure 3-24: SATA 3Gb/s Drive Connector Locations..............................................................41
Figure 3-25: SATA Power Connector Locations .......................................................................42
Figure 3-26: RS-232 Serial Port Connector Locations..............................................................43
Figure 3-27: RS-422/485 Connector Location............................................................................44
Figure 3-28: SMBus Connector Location...................................................................................45
Figure 3-29: SPI Flash Connector Location...............................................................................46
Figure 3-30: SPI EC Flash Connector Location.........................................................................47
Figure 3-31: USB 2.0 Connector Location .................................................................................48
Figure 3-32: External Peripheral Interface Connector..............................................................48
Figure 3-33: Ethernet Connector.................................................................................................50
Figure 3-34: HDMI Connector......................................................................................................51
Figure 3-35: PS/2 Pinout and Configuration..............................................................................51
Figure 3-36: VGA Connector .......................................................................................................53
Figure 4-1: SO-DIMM Installation................................................................................................57
Figure 4-2: iRIS-1010 Module Installation ..................................................................................58
Figure 4-3: PCIe Mini Card Installation.......................................................................................59
Figure 4-4: AT/ATX Power Mode Switch Location....................................................................60
Figure 4-5: Clear CMOS Button Location...................................................................................60
Figure 4-6: LVDS Panel Resolution Selection Switch Location ..............................................62
Figure 4-7: LCD Voltage Selection Switch Location.................................................................63
Figure 4-8: mSATA/SATA Switch Location................................................................................63
Figure 4-9: PCI-104 Voltage Switch Location ............................................................................64
Figure 4-10: Power Cable to Motherboard Connection............................................................65
Figure 4-11: Connect Power Cable to Power Supply................................................................66
Figure 4-12: SATA Drive Cable Connection...............................................................................67
Figure 4-13: Single RS-232 Cable Installation ...........................................................................68
Figure 6-1: Driver CD Main Menu............................................................................................. 105
Figure 6-2: Available Drivers.................................................................................................... 105

NANO-BT EPIC SBC
Page x
List of Tables
Table 1-1: Model Variations...........................................................................................................3
Table 1-2: NANO-BT Specifications............................................................................................12
Table 2-1: Packing List.................................................................................................................16
Table 2-2: Optional Items.............................................................................................................16
Table 3-1: Peripheral Interface Connectors...............................................................................20
Table 3-2: Rear Panel Connectors..............................................................................................21
Table 3-3: CPU Power Connector Pinouts.................................................................................22
Table 3-4: Audio Connector Pinouts ..........................................................................................23
Table 3-5: Battery Connector Pinouts........................................................................................24
Table 3-6: Backlight Inverter Connector Pinouts......................................................................25
Table 3-7: Chassis Intrusion Connector Pinouts......................................................................26
Table 3-8: Digital I/O Connector Pinouts....................................................................................27
Table 3-9: CPU Fan Connector Pinouts......................................................................................28
Table 3-10: System Fan Connector Pinouts ..............................................................................29
Table 3-11: Front Panel Connector Pinouts...............................................................................30
Table 3-12: IPMI LED Connector Pinouts...................................................................................31
Table 3-13: LAN1 LED Connector (JP8) Pinouts.......................................................................32
Table 3-14: LAN2 LED Connector (JP9) Pinouts.......................................................................33
Table 3-15: LVDS Connector Pinouts.........................................................................................34
Table 3-16: PCI-104 Connector Pinouts .....................................................................................37
Table 3-17: PCIe Mini Card Slot Pinouts ....................................................................................38
Table 3-18: Power Button Pinouts ..............................................................................................39
Table 3-19: Reset Button Connector Pinouts............................................................................41
Table 3-20: SATA 3Gb/s Drive Connector Pinouts....................................................................41
Table 3-21: SATA Power Connector Pinouts.............................................................................42
Table 3-22: RS-232 Serial Port Connector Pinouts...................................................................43
Table 3-23: RS-422/485 Connector Pinouts ...............................................................................44
Table 3-24: RS-422/485 Pinouts of D-sub 9 Connector.............................................................44
Table 3-25: SMBus Connector Pinouts ......................................................................................45
Table 3-26: SPI Flash Connector Pinouts ..................................................................................46

NANO-BT EPIC SBC
Page xi
Table 3-27: SPI EC Flash Connector Pinouts ............................................................................47
Table 3-28: USB 2.0 Connector Pinouts.....................................................................................48
Table 3-29: LAN1 Ethernet Connector Pinouts .........................................................................49
Table 3-30: LAN2 Ethernet Connector Pinouts .........................................................................49
Table 3-31: Connector LEDs........................................................................................................50
Table 3-32: HDMI Connector Pinouts .........................................................................................51
Table 3-33: Keyboard Connector Pinouts..................................................................................52
Table 3-34: USB 2.0 Port Pinouts................................................................................................52
Table 3-35: USB 3.0 Port Pinouts................................................................................................53
Table 3-36: VGA Connector Pinouts...........................................................................................53
Table 4-1: LVDS Panel Resolution Selection.............................................................................61
Table 4-2: LCD Voltage Selection Switch Settings ...................................................................62
Table 4-3: mSATA/SATA Switch Settings..................................................................................63
Table 4-4: PCI-104 Voltage Switch Settings...............................................................................64
Table 5-1: BIOS Navigation Keys................................................................................................71

NANO-BT EPIC SBC
Page xii
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................72
BIOS Menu 2: Advanced..............................................................................................................73
BIOS Menu 3: ACPI Configuration..............................................................................................74
BIOS Menu 4: F81866 Super IO Configuration ..........................................................................75
BIOS Menu 5: Serial Port n Configuration Menu.......................................................................75
BIOS Menu 6: iWDD H/W Monitor................................................................................................80
BIOS Menu 7: Smart Fan Mode Configuration ..........................................................................81
BIOS Menu 8: RTC Wake Settings..............................................................................................83
BIOS Menu 9: Serial Port Console Redirection.........................................................................84
BIOS Menu 10: IEI Feature...........................................................................................................87
BIOS Menu 11: CPU Configuration.............................................................................................88
BIOS Menu 12: IDE Configuration...............................................................................................90
BIOS Menu 13: USB Configuration.............................................................................................91
BIOS Menu 14: Chipset................................................................................................................92
BIOS Menu 15: North Bridge .......................................................................................................93
BIOS Menu 16: Intel IGD Configuration......................................................................................93
BIOS Menu 17: South Bridge.......................................................................................................96
BIOS Menu 18: PCI Express Configuration ...............................................................................97
BIOS Menu 19: Security...............................................................................................................98
BIOS Menu 20: Boot.....................................................................................................................99
BIOS Menu 21:Exit..................................................................................................................... 101

NANO-BT EPIC SBC
Page 1
Chapter
1
1 Introduction

NANO-BT EPIC SBC
Page 2
1.1 Introduction
Figure 1-1: NANO-BT
The NANO-BT series is an EPIC form factor single bard computer. It has an on-board
22nm Intel® Atom™ or Celeron® processor, and supports one 204-pin 1333/1066 MHz
dual-channel unbuffered DDR3 Low Voltage (DDR3L) SDRAM SO-DIMM with up to
8.0 GB of memory.
The NANO-BT-i1 models feature Intelligent Platform Management Interface (IPMI) that
helps lower the overall costs of server management by enabling users to maximize IT
resource, save time and manage multiple systems. The NANO-BT-i1 supports IPMI 2.0
through the optional iRIS-1010 module.
The NANO-BT includes one VGA port and one HDMI port for dual independent display It
also has an internal 18-bit/24-bit dual-channel LVDS connector supporting up to 1920 x
1200 resolutions. Expansion and I/O include one PCI-104 slot, one PCIe Mini slot, one
USB 3.0 port plus one USB 2.0 on the rear panel, two USB 2.0 by pin header, two SATA
3Gb/s connectors, three RS-232 serial ports, and one PS/2 keyboard/mouse connector.

NANO-BT EPIC SBC
Page 3
1.2 Model Variations
There are several models of the NANO-BT series. The model variations are listed in
Table 1-1.
Model On-board SoC Max.
Memory
Operating
Temp.
iRIS
Standard
NANO-BT-i1-J19001 Intel® Celeron® processor J1900
(2 GHz, quad-core, 2 MB cache)
8 GB -20ºC–60ºC Yes
NANO-BT-i1-N28071 Intel® Celeron® processor N2807
(1.58 GHz, dual-core, 2 MB cache)
4 GB -20ºC–60ºC Yes
NANO-BT-i1-N29301 Intel® Celeron® processor N2930
(1.83 GHz, quad-core, 2 MB cache)
8 GB -20ºC–60ºC Yes
NANO-BT-E38451W2 Intel® Atom™ processor E3845
(1.91 GHz, quad-core, 2 MB cache) 8 GB -40ºC–85ºC No
By Request (MOQ: 100 pcs/lot)
NANO-BT-i1-E38151 -20ºC–60ºC Yes
NANO-BT-E38151W2
Intel® Atom™ processor E3815
(1.46 GHz, single-core, 512 KB cache)
4 GB -40ºC–85ºC No
NANO-BT-i1-E38251 -20ºC–60ºC Yes
NANO-BT-E38251W2
Intel® Atom™ processor E3825
(1.33 GHz, dual-core, 1 MB cache) 4 GB -40ºC–85ºC No
NANO-BT-i1-E38261 -20ºC–60ºC Yes
NANO-BT-E38261W2
Intel® Atom™ processor E3826
(1.46 GHz, dual-core, 1 MB cache) 8 GB -40ºC–85ºC No
NANO-BT-i1-E38271 -20ºC–60ºC Yes
NANO-BT-E38271W2
Intel® Atom™ processor E3827
(1.75 GHz, dual-core, 1 MB cache) 8 GB -40ºC–85ºC No
NANO-BT-i1-E38451 Intel® Atom™ processor E3845
(1.91 GHz, quad-core, 2 MB cache) 8 GB 20ºC–60ºC Yes
Table 1-1: Model Variations

NANO-BT EPIC SBC
Page 4
1.3 Benefits
Some of the NANO-BT motherboard benefits include:
Powerful graphics with multiple monitors
Staying connected with both wired LAN connections
Speedy running of multiple programs and applications
1.4 Features
Some of the NANO-BT motherboard features are listed below:
EPIC form factor
RoHS compliant
On-board 22nm Intel® Atomor Celeron® processor
One 204-pin 1333/1066 MHz dual-channel unbuffered DDR3L (1.35 V)
SDRAM SO-DIMM slot supports up to 8.0 GB of memory
LVDS, VGA and HDMI interfaces for dual independent display
Supports IPMI 2.0 via IEI iRIS-1010 module
Two Intel® PCIe GbE connectors
Two SATA 3Gb/s connectors
One full-size PCIe Mini card expansion slot
One PCI-104 expansion slot
One USB 3.0 port and three USB 2.0 ports
Three RS-232 serial ports and one RS-422/485 serial port
High Definition Audio

NANO-BT EPIC SBC
Page 5
1.5 Connectors
The connectors on the NANO-BT are shown in the figure below.
Figure 1-2: Connectors (Front Side)

NANO-BT EPIC SBC
Page 6
Figure 1-3: Connectors (Solder Side)

NANO-BT EPIC SBC
Page 7
1.6 Dimensions
The main dimensions of the NANO-BT are shown in the diagram below.
Figure 1-4: NANO-BT Main Dimensions (mm)

NANO-BT EPIC SBC
Page 8
The height of the NANO-BT series varies depending on the heatsink installed on the
board. Figure 1-5 shows the height dimensions of the following models:
NANO-BT-i1-E38271
NANO-BT-i1-E38261
NANO-BT-i1-E38251
NANO-BT-i1-E38151
NANO-BT-i1-N28071
Figure 1-5: NANO-BT Height Dimensions 1 (mm)
Figure 1-6 shows the height dimensions of the following models:
NANO-BT-i1-E38451
NANO-BT-i1-J19001
NANO-BT-i1-N29301
NANO-BT-E38xx1W2
Figure 1-6: NANO-BT Height Dimensions 2 (mm)