IEI Technology Kino-g410 User manual

Product User Manual
and enterprise branch and head officesKINO-G410
IEI
www.enochsystems.com 1-877-722-1116 [email protected]
Copyright © 2013 Enoch Systems, LLC, Enoch Systems and the Enoch Systems logo are trademarks or registered trademarks of Enoch Systems, LLC and/or its affiliates in the U.S. and other countries.
Third-party trademarks mentioned are the property of their respective owners. All rights reserved.

KINO-G410 Mini-ITXMotherboard
Page i
IEITechnology Corp.
User Manual
MODEL:
KINO-G410
Mini-ITX Motherboard for Intel® Core™2 Duo/Quad/Extreme
CPU, 800/1066/1333 MHz FSB, DDR3, VGA, LAN, S ATA 3Gb/s,
PCIe x16, USB, HD Audio, RoHS Compliant
Rev. 2.00 – 6 March, 2012

KINO-G410 Mini-ITXMotherboard
Page ii
Revision
Date Version Changes
6 March, 2012 2.00 Update the version number
20 January, 2012 1.03 Update the BIOS section
17 August, 2011 1.02 Modified Figure 4-9
4 March, 2011 1.01 Modified VGA to LVDS connector pinouts (Table 3-16)
13 September, 2010 1.00 Initial release

KINO-G410 Mini-ITXMotherboard
Page iii
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

KINO-G410 Mini-ITXMotherboard
Page iv
Table ofContents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 BENEFITS ................................................................................................................... 2
1.3 FEATURES................................................................................................................... 2
1.4 CONNECTORS ............................................................................................................. 3
1.5 DIMENSIONS............................................................................................................... 4
1.6 DATA FLOW................................................................................................................ 5
1.7 TECHNICAL SPECIFICATIONS ...................................................................................... 6
2 PACKING LIST............................................................................................................. 8
2.1ANTI-STATIC PRECAUTIONS........................................................................................ 9
2.2 UNPACKING PRECAUTIONS......................................................................................... 9
2.3 PACKING LIST........................................................................................................... 10
2.4 OPTIONAL ITEMS.......................................................................................................11
3 CONNECTORS ........................................................................................................... 13
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 14
3.1.1 Layout .............................................................................................................. 14
3.1.2 Peripheral Interface Connectors ..................................................................... 15
3.1.3 External Interface Panel Connectors............................................................... 15
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 16
3.2.1 Battery Connector............................................................................................ 16
3.2.2 CPU Fan Connector........................................................................................ 17
3.2.3 System Fan Connector..................................................................................... 18
3.2.4 CPU Power Input Connector........................................................................... 18
3.2.5 Digital I/O Connector...................................................................................... 19
3.2.6 Front Panel Connector .................................................................................... 20
3.2.7 Memory Slot..................................................................................................... 21
3.2.8 Parallel Port Connector .................................................................................. 21
3.2.9 Power Connector............................................................................................. 23
3.2.10 RS-232 Serial Port Connector....................................................................... 24

KINO-G410 Mini-ITXMotherboard
Page v
3.2.11 RS-232/422/485 Serial Port Connector ......................................................... 25
3.2.12 SATA Drive Connectors ................................................................................. 26
3.2.13 SMBus Connector .......................................................................................... 26
3.2.14 SPI Flash Connector...................................................................................... 27
3.2.15 USB Connectors............................................................................................. 28
3.2.16 VGA to LVDS Connector................................................................................ 29
3.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 30
3.3.1 Audio Connector.............................................................................................. 30
3.3.2 Keyboard/Mouse Connector ............................................................................ 31
3.3.3 LAN Connector ................................................................................................ 31
3.3.4 Serial Port Connectors (COM1, COM2 and COM3)...................................... 32
3.3.5 USB Connector ................................................................................................ 33
3.3.6 VGA Connector................................................................................................ 33
4 INSTALLATION ......................................................................................................... 35
4.1ANTI-STATIC PRECAUTIONS...................................................................................... 36
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 36
4.3 BASIC INSTALLATION ............................................................................................... 38
4.3.1 CPU Installation.............................................................................................. 38
4.3.2 Cooling Kit Installation ................................................................................... 41
4.3.3 DIMM Installation ........................................................................................... 43
4.3.4 Motherboard Installation................................................................................. 43
4.4 JUMPER SETTINGS .................................................................................................... 44
4.4.1 Clear CMOS Jumper........................................................................................ 44
4.4.2 COM 6 Function Select Jumper....................................................................... 45
4.5 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 46
4.5.1 SATA Drive Connection ................................................................................... 46
4.5.2 USB Cable (Dual Port) with Slot Bracket ....................................................... 48
4.6 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 49
4.6.1 Audio Connector.............................................................................................. 49
4.6.2 PS/2 Keyboard and Mouse Connection........................................................... 50
4.6.3 LAN Connection............................................................................................... 51
4.6.4 Serial Device Connection ................................................................................ 52
4.6.5 USB Device Connection................................................................................... 53
4.6.6 VGA Monitor Connection ................................................................................ 54

KINO-G410 Mini-ITXMotherboard
Page vi
4.7 SOFTWARE INSTALLATION ........................................................................................ 55
5 BIOS.............................................................................................................................. 56
5.1 INTRODUCTION......................................................................................................... 57
5.1.1 Starting Setup................................................................................................... 57
5.1.2 Using Setup...................................................................................................... 57
5.1.3 Getting Help..................................................................................................... 58
5.1.4 Unable to Reboot after Configuration Changes.............................................. 58
5.1.5 BIOS Menu Bar................................................................................................ 58
5.2 MAIN........................................................................................................................ 59
5.3ADVANCED............................................................................................................... 60
5.3.1 CPU Configuration.......................................................................................... 61
5.3.2 IDE Configuration........................................................................................... 61
5.3.2.1 IDE Master, IDE Slave ............................................................................. 63
5.3.3 Super IO Configuration ................................................................................... 68
5.3.4 Hardware Health Configuration...................................................................... 73
5.3.5 Power Configuration ....................................................................................... 76
5.3.5.1 ACPI configuration................................................................................... 77
5.3.5.2 APM Configuration................................................................................... 77
5.3.6 Remote Access Configuration.......................................................................... 79
5.3.7 USB Configuration........................................................................................... 82
5.4 PCI/PNP................................................................................................................... 83
5.5 BOOT........................................................................................................................ 86
5.5.1 Boot Settings Configuration............................................................................. 86
5.6 SECURITY................................................................................................................. 88
5.7 CHIPSET ................................................................................................................... 90
5.7.1 North Bridge Chipset Configuration ............................................................... 90
5.7.2 South Bridge Chipset Configuration................................................................ 92
5.8 EXIT......................................................................................................................... 93
A BIOS OPTIONS .......................................................................................................... 95
B TERMINOLOGY........................................................................................................ 99
C ONE KEY RECOVERY........................................................................................... 103
C.1 ONE KEY RECOVERY INTRODUCTION .................................................................... 104
C.1.1 System Requirement ...................................................................................... 105

KINO-G410 Mini-ITXMotherboard
Page vii
C.1.2 Supported Operating System......................................................................... 106
C.2 SETUP PROCEDURE FOR WINDOWS........................................................................ 107
C.2.1 Hardware and BIOS Setup............................................................................ 107
C.2.2 Create Partitions........................................................................................... 108
C.2.3 Install Operating System, Drivers and Applications......................................111
C.2.4 Build-up Recovery Partition...........................................................................112
C.2.5 Create Factory Default Image .......................................................................114
C.3 SETUP PROCEDURE FOR LINUX...............................................................................119
C.4 RECOVERY TOOL FUNCTIONS ................................................................................ 122
C.4.1 Factory Restore............................................................................................. 124
C.4.2 Backup System............................................................................................... 125
C.4.3 Restore Your Last Backup.............................................................................. 126
C.4.4 Manual .......................................................................................................... 127
C.5 OTHER INFORMATION............................................................................................ 128
C.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller ...................... 128
C.5.2 System Memory Requirement........................................................................ 130
D WATCHDOG TIMER .............................................................................................. 131
E DIGITAL I/O INTERFACE..................................................................................... 134
E.1 INTRODUCTION ...................................................................................................... 135
E.2 DIO CONNECTOR PINOUTS.................................................................................... 135
E.3ASSEMBLY LANGUAGE EXAMPLE .......................................................................... 135
F HAZARDOUS MATERIALS DISCLOSURE........................................................ 136
F.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY..................................... 137

KINO-G410 Mini-ITXMotherboard
Page viii
List ofFigures
Figure 1-1: KINO-G410 ...................................................................................................................2
Figure 1-2: Connectors ..................................................................................................................3
Figure 1-3: Dimensions (mm)........................................................................................................4
Figure 1-4: Data Flow Diagram......................................................................................................5
Figure 3-1: Connectors and Jumpers.........................................................................................14
Figure 3-2: Battery Connector Location.....................................................................................16
Figure 3-3: CPU Fan Connector Location..................................................................................17
Figure 3-4: CPU Fan Connector Location..................................................................................18
Figure 3-5: CPU Power Input Connector Location....................................................................19
Figure 3-6: Digital I/O Connector Locations ..............................................................................19
Figure 3-7: Front Panel Connector Location .............................................................................20
Figure 3-8: Memory Card Slot Location .....................................................................................21
Figure 3-9: Parallel Port Connector Location............................................................................22
Figure 3-10: Power Connector Location ....................................................................................23
Figure 3-11: Serial Port Connector Location.............................................................................24
Figure 3-12: RS-232/422/485 Serial Port Connector Location..................................................25
Figure 3-13: SATA Drive Connector Location...........................................................................26
Figure 3-14: SMBus Connector Location...................................................................................27
Figure 3-15: SPI Flash Connector...............................................................................................27
Figure 3-16: USB Connector Pinout Locations.........................................................................28
Figure 3-17: VGA to LVDS Connector Location ........................................................................29
Figure 3-18: External Peripheral Interface Connector..............................................................30
Figure 3-19: Audio Connector.....................................................................................................30
Figure 3-20: PS/2 Pinout and Configuration..............................................................................31
Figure 3-21: Serial Port Pinouts..................................................................................................32
Figure 3-22: VGA Connector .......................................................................................................33
Figure 4-1: Intel LGA775 Socket .................................................................................................38
Figure 4-2: Remove Protective Cover.........................................................................................39
Figure 4-3: CPU Socket Load Plate.............................................................................................39
Figure 4-4: Insert the Socket LGA775 CPU................................................................................40

KINO-G410 Mini-ITXMotherboard
Page ix
Figure 4-5: Cooling Kits...............................................................................................................41
Figure 4-6: Securing the Heat sink to the KINO-G410 ..............................................................42
Figure 4-7: DIMM Installation.......................................................................................................43
Figure 4-8: Clear BIOS Jumper Location ...................................................................................45
Figure 4-9: COM 6 Function Select Jumper Location...............................................................46
Figure 4-10: SATA Drive Cable Connection...............................................................................47
Figure 4-11: SATA Power Drive Connection..............................................................................48
Figure 4-12: Dual USB Cable Connection..................................................................................49
Figure 4-13: Audio Connector.....................................................................................................50
Figure 4-14: PS/2 Keyboard/Mouse Connector.........................................................................51
Figure 4-15: LAN Connection......................................................................................................52
Figure 4-16: Serial Device Connector.........................................................................................53
Figure 4-17: USB Connector........................................................................................................54
Figure 4-18: VGA Connector .......................................................................................................55
Figure C-1: IEI One Key Recovery Tool Menu .........................................................................104
Figure C-2: Launching the Recovery Tool...............................................................................108
Figure C-3: Recovery Tool Setup Menu ...................................................................................109
Figure C-4: Command Mode......................................................................................................109
Figure C-5: Partition Creation Commands...............................................................................110
Figure C-6: Launching the Recovery Tool...............................................................................112
Figure C-7: System Configuration for Windows .....................................................................112
Figure C-8: Build-up Recovery Partition..................................................................................113
Figure C-9: Press any key to continue.....................................................................................113
Figure C-10: Press F3 to Boot into Recovery Mode................................................................114
Figure C-11: Recovery Tool Menu ............................................................................................114
Figure C-12: About Symantec Ghost Window.........................................................................115
Figure C-13: Symantec Ghost Path ..........................................................................................115
Figure C-14: Select a Local Source Drive ................................................................................116
Figure C-15: Select a Source Partition from Basic Drive .......................................................116
Figure C-16: File Name to Copy Image to ................................................................................117
Figure C-17: Compress Image...................................................................................................117
Figure C-18: Image Creation Confirmation..............................................................................118
Figure C-19: Image Creation Process.......................................................................................118
Figure C-20: Image Creation Complete....................................................................................118
Figure C-21: Press Any Key to Continue .................................................................................119

KINO-G410 Mini-ITXMotherboard
Page x
Figure C-22: Partitions for Linux...............................................................................................120
Figure C-23: System Configuration for Linux..........................................................................121
Figure C-24: Access menu.lst in Linux (Text Mode)...............................................................121
Figure C-25: Recovery Tool Menu ............................................................................................122
Figure C-26: Recovery Tool Main Menu...................................................................................123
Figure C-27: Restore Factory Default.......................................................................................124
Figure C-28: Recovery Complete Window...............................................................................124
Figure C-29: Backup System.....................................................................................................125
Figure C-30: System Backup Complete Window ....................................................................125
Figure C-31: Restore Backup....................................................................................................126
Figure C-32: Restore System Backup Complete Window......................................................126
Figure C-33: Symantec Ghost Window ....................................................................................127

KINO-G410 Mini-ITXMotherboard
Page xi
List of Tables
Table 1-1: Technical Specifications..............................................................................................7
Table 2-1: Packing List.................................................................................................................10
Table 2-2: Optional Items.............................................................................................................12
Table 3–1: Internal Peripheral Connectors................................................................................15
Table 3–2: External Peripheral Connectors...............................................................................16
Table 3-3: Battery Connector Pinouts........................................................................................17
Table 3-4: CPU Fan Connector Pinouts......................................................................................17
Table 3-5: CPU Fan Connector Pinouts......................................................................................18
Table 3-6: CPU Power Input Connector Pinouts .......................................................................19
Table 3-7: Digital I/O Connector Pinouts....................................................................................20
Table 3-8: Front Panel Connector Pinouts.................................................................................21
Table 3-9: Parallel Port Connector Pinouts ...............................................................................22
Table 3-10: Power Connector Pinouts........................................................................................23
Table 3-11: Serial Port Connector Pinouts ................................................................................24
Table 3-12: RS-232/422/485 Serial Port Connector Pinouts.....................................................25
Table 3-13: SMBus Connector Pinouts ......................................................................................27
Table 3-14: SPI Flash Connector.................................................................................................28
Table 3-15: USB Port Connector Pinouts...................................................................................28
Table 3-16: VGA to LVDS Connector Pinouts............................................................................29
Table 3-17: Keyboard Connector Pinouts..................................................................................31
Table 3-18: LAN Pinouts ..............................................................................................................32
Table 3-19: Serial Port Pinouts....................................................................................................32
Table 3-20: USB Port Pinouts......................................................................................................33
Table 3-21: VGA Connector Pinouts...........................................................................................34
Table 4-1: Jumpers.......................................................................................................................44
Table 4-2: Clear BIOS Jumper Settings......................................................................................45
Table 4-3: COM 6 Function Select Jumper Settings.................................................................45
Table 5-1: BIOS Navigation Keys................................................................................................58

KINO-G410 Mini-ITXMotherboard
Page xii
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................59
BIOS Menu 2: Advanced..............................................................................................................60
BIOS Menu 3: CPU Configuration...............................................................................................61
BIOS Menu 4: IDE Configuration.................................................................................................62
BIOS Menu 5: IDE Master and IDE Slave Configuration...........................................................63
BIOS Menu 6: Super IO Configuration........................................................................................68
BIOS Menu 7: Hardware Health Configuration..........................................................................73
BIOS Menu 8: Power Configuration............................................................................................76
BIOS Menu 9: ACPI Configuration..............................................................................................77
BIOS Menu 10: Advanced Power Management Configuration................................................78
BIOS Menu 11: Remote Access Configuration..........................................................................79
BIOS Menu 12: USB Configuration.............................................................................................82
BIOS Menu 13: PCI/PnP Configuration.......................................................................................84
BIOS Menu 14: Boot.....................................................................................................................86
BIOS Menu 15: Boot Settings Configuration.............................................................................86
BIOS Menu 16: Security...............................................................................................................88
BIOS Menu 17: Chipset................................................................................................................90
BIOS Menu 18: North Bridge Chipset Configuration................................................................91
BIOS Menu 19: South Bridge Chipset Configuration................................................................92
BIOS Menu 20: Exit.......................................................................................................................93

KINO-G410 Mini-ITXMotherboard
Page 1
Chapter
1
1Introduction

KINO-G410 Mini-ITXMotherboard
Page 2
1.1 Introduction
Figure 1-1: KINO-G410
The KINO-G410 is a Mini-ITX motherboard with an 800/1066/1333 MHz front side bus.
The LGA775 socket accepts Intel® Core™2 Duo/Quad/Extreme processors and the card
supports two DDR3 DIMMs up to 2.0 GB each (4.0 GB total). The KINO-G410 includes
VGA output and an optional 24-bit LVDS output. One PCIe x16 expansion card may be
added. Other features include four SATA 3Gb/s, dual Gigabit LAN, digital I/O, five RS-232
serial ports, one RS-232/422/485 serial ports, one parallel port, audio jacks and eight USB
ports.
1.2 Benefits
Some of the KINO-G410 motherboard benefits include:
Powerful graphics
Staying connected with both wired LAN connections
Speedy running of multiple programs and applications
1.3 Features
Some of the KINO-G410 motherboard features are listed below:
Mini-ITX form factor

KINO-G410 Mini-ITXMotherboard
Page 3
RoHS compliant
LGA775 CPU socket
Supports two DDR3 DIMMs
Two Gigabit Ethernet connectors
Four SATA connectors
Eight USB ports
Six serial ports
Support 24-bit LVDS by the optional VGA to LVDS converter module
1.4 Connectors
The connectors on the KINO-G410 are shown in the figure below.
Figure 1-2: Connectors

KINO-G410 Mini-ITXMotherboard
Page 4
1.5 Dimensions
The main dimensions of the KINO-G410 are shown in the diagram below.
Figure 1-3: Dimensions (mm)

KINO-G410 Mini-ITXMotherboard
Page 5
1.6 Data Flow
Figure 1-4 shows the data flow between the system chipset, the CPU and other
components installed on the motherboard.
Figure 1-4: Data Flow Diagram

KINO-G410 Mini-ITXMotherboard
Page 6
1.7 TechnicalSpecifications
KINO-G410 technical specifications are shown below.
Specifications KINO-G410
Form Factor Mini-ITX
CPUSupported Socket LGA775 Intel® Core™2 Duo/Quad/Extreme or
Celeron® processor
Front Side Bus (FSB) 800/1066/1333 MHz
Northbridge Chipset Intel® G41
Memory Two 240-pin 800/1066 MHz dual-channel DDR3 SDRAM
DIMMs (system max. 4 GB)
Graphic Engine Intel® GMA4500
Integrated Graphics VGA integrated in Intel® G41
24-bit LVDS via VGA to LVDS converter module
Southbridge Chipset Intel® ICH7
BIOS AMI BIOS
Digital I/O 8-bit, 4-bit input/4-bit output
Ethernet Controllers Two Realtek RTL8111E PCIe GbE controllers withASF2.0
support
Super I/O Controller Fintek F81865
Watchdog Timer Software programmable supports 1~255 sec. system reset
Audio Realtek ALC888 HD Audio codec
Expansion One PCIe x16 socket
I/O Interfa c e
Audio Jack One line-out
One mic-in
Fan connector One 4-pin wafer for CPU fan
One 3-pin wafer for system fan
Keyboard/Mouse Two external PS/2 connectors

KINO-G410 Mini-ITXMotherboard
Page 7
Serial Ports Five RS-232 COM connectors
One RS-232/422/485 COM connector
USB 2.0/1.1 ports Four internal via pin header
Four external USB ports
Parallel Port One parallel port via 26-pin header
Serial ATA Four independent SATA channels with 3.0 Gb/s data
transfer rates
Environmentaland Power Specifications
Power Supply ATX supported
Power Consumption 5 V @ 6.41 A
Vcore_12 V @ 2.52 A
3.3 V @ 0.27 A
(2.8 GHz Intel® Core™2 Duo E7400 with two 1 GB
1066 MHz DDR3 DIMMs)
Operating temperature -10ºC ~ 60ºC, requires cooler and silicone heat sink paste
Humidity 5% ~ 95% (non-condensing)
Phys ical Specifications
Dimensions 170 mm x 170 mm
Weight (Gross/Net) 1100 g / 700 g
Table 1-1: Technical Specifications