IEI Technology LAN-10G2SF-PHY-CS4227 User manual

LAN-10G2SF-PHY-CS4227
Dual 10GbE LAN Module
Quick Installation Guide
Version 1.00
Features
XFI interface compliant
Dual SFP+ port with 10GbE LAN support
Low-profile/tower bracket
Inphi®CS4227 PHY
Packing List
1 x LAN-10G2SF-PHY-CS4227 dual 10GbE LAN module
1 x QIG (Quick Installation Guide)

Specifications
Interface XFI interface
Ethernet Inphi®CS4227
External Connector 2 x 10GbE SFP+ connector
Operating Temperature 0°C ~ 60°C
Storage Temperature -10°C ~ 70°C
Operating Humidity 10% ~ 95%, non-condensing
Dimensions (LxW) 106.83 mm x 68.9 mm
Ordering Information
LAN-10G2F-PHY-CS4227:
10 GbE LAN card, dual port support, RoHS
Connector Pinouts
CN2/CN4: External LAN connector
Pin Description Pin Description
1 VeeT1 (Module transmitter ground) 11 VeeR2 (Module receiver ground)
2 TX Fault (Module transmitter fault) 12 RD- (Receiver inverted data output)
3 TX Disable (Transmitter disabled) 13 RD+ (Receiver noninverted data output)
4 SDA (2-wire serial interface data line) 14 VeeR3 (Module receiver ground)
5 SCL (2-wire serial interface clock) 15 VccR (Module receiver 3.3 V supply)
6 MOD-ABS (Module absent) 16 VccT (Module transmitter 3.3 V supply)
7 RS0 (Rate select 0, optionally controls
SFP+ module receiver) 17 VeeT2
(Module transmitter ground)
8 N/A 18 TD+ (Transmitter noninverted data output)
9 RS1(Rate select 1, optionally controls
SFP+ transmitter) 19 TD-
(Transmitter inverted data output)
10 VeeR1 (Module receiver ground) 20 VeeT3 (Module transmitter ground)
LAN LED Description LAN LED Description
Left
(orange)
On: linked
Blinking: data is being
sent/received
Right
(green)
On: linked

Dimensions (Unit: mm)

Safety Instructions
Warning! To prevent the system from overheating, do not operate it in an area that exceeds
the maximum operating temperature described in the user manual. Ultimate disposal of this
product should be handled according to all national laws and regulations.
IEI Support URL
http://new.ieiworld.com/tw/online_support_form
Compliance
This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or
installs other devices in the equipment, the CE conformity declaration may no longer apply.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
According to the requirement of the WEEE legislation the following user information is provided to customers for all
branded IEI Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop o- your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Headquarters
IEI Integration Corp.
No. 29, ZhongXing Rd., Xizhi Dist.,
New Taipei City 221, Taiwan
TEL: [phone]
FAX: [phone]
[e-mail]
www.ieiworld.com
America
IEI Technology USA Corp.
138 University Parkway, Pomona,
CA 91768, USA
Tel:[phone]
Fax:[phone]
[email protected]iworld.com
usa.ieiworld.com
China
IEI Integration (Shanghai) Corp.
No. 515, Shen Fu Rd., Xin Zhuang Industrial Develop Zone,
Shanghai, 201108, China
Tel:[phone]
Fax:[phone]
[e-mail]
www.ieiworld.com.cn
Copyright ©2017 IEI Integration Corp. All rights reserved.