iHome WETVAC WV5 User manual

Owner’s Guide
Model iHWV5
ULTRA VERSATILE
WET + DRY VACUUM
For support content and the latest digital
copy of this manual, scan the QR code
above or visit iHomeclean.com
WETVAC
WV5

3
For household use only.
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. Failure to follow the warnings and instructions may result in electric shock, re and/or
serious injury.
WARNING – To reduce the risk of re, electric shock, or injury:
1. Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants.
2. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or instruction.
3. Use indoors, on surfaces such as vinyl, tile, sealed wood, etc.
4. Use as described in this owner’s guide. Use manufacturer’s recommended parts and accessories.
5. Do not use with a damaged cord or plug. If appliance has been dropped, damaged, left outdoors or is not working as it should, contact our iHome
Clean Customer Care Team at 877-370-4580.
6. Do not handle charger, including charger plug, and charger terminals with wet hands.
7. Do not block openings. Stop use if openings become blocked. Clean and remove any blocked objects according to the enclosed manual instructions.
8. Keep hair, loose clothing, ngers, and all parts of your body away from openings and moving parts.
9. Do not use to pick up ammable or combustible liquids, such as gasoline, or use in areas where they may be present.
10. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
11. Do not use to pick up hazardous material and chemicals or sharp objects.
12. Ensure the appliance is in the off position before charging, picking up or carrying the appliance. Carrying the appliance with your nger on the switch
or powering on the appliance with the switch on may cause accidents.
13. For the purposes of recharging the battery, only use the detachable power adapter provided with this appliance.
14. Under improper usage, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, ush with water. If liquid comes into eye
contact, seek medical help. Liquid ejected from the battery may cause irritation or burns.
15. Do not use the appliance that is damaged or modied. Damaged or modied batteries may exhibit unpredictable behavior resulting in re, explosion
or risk of injury.
16. Do not expose the appliance to re or excessive heat. Exposure to re or temperatures above 250°F (121°C) may cause an explosion.
17. Only charge, store or use the appliance in a dry indoor area where the temperature is higher than 39.2°F (4°C) but lower than 104°F (40°C). The
charger is for indoor use only. Charging improperly or at temperatures outside of the specied range may damage the battery and increase the risk of
re.
18. Do not use appliance unless the lters are in place.
19. Have servicing performed by a qualied repair person using only identical replacement parts provided by the manufacturer. This will ensure that the
safety of the product is maintained.
20. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
21. Always turn off this appliance before connecting or disconnecting the motorized nozzles and attachments.
22. Thoroughly clean and dry the Dirty Water Tank after each use. This is to avoid potential blockage, which may lead to low suction power, motor
overheating, or reduce the service life of the appliance.
23. Regularly clean and dry lters and roller brush. This is to avoid buildup, bacteria growth and foul smells.
24. Do not submerge the product in water. Do not use the appliance in standing water that is deeper than 1/2 inch.
25. Do not use with any cleaning solution unless it is explicitly approved by the manufacturer.
FCC Information
1: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) This device must accept any interference received, including interference that may cause undesired operation.
2: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
iHWV5-WHT-IB-V12
SAFETY

4
Assembling the WETVAC
Setting the Base Station
Charging the WETVAC
Filling the Clean Water Tank
Cleaning Floors with the WETVAC
Self Cleaning
Roller Brush Cleaning
Tank and Filter Cleaning
Charging Station & Drying Tray Cleaning
Storage
Care Frequency
TABLE OF CONTENTS
3Safety
5Product Overview
6Digital Display
11 - 15 Cleaning and Maintenance
16 - 17 Troubleshooting
18 Error Codes
19 Warranty
7 - 8 Getting Started
9 - 10 Using your WETVAC
Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: [phone]

5
PRODUCT OVERVIEW
2
4
6
8
10
12
15
14
1
3
5
7
9
11
13
1: On/Off Button
2: Max/Eco Button
3: Spray Trigger
4: Digital Display
5: Voice Guidance On/Off Switch
6: Self Cleaning Button
7: Body Handle
8: Clean Water Tank
9: Carry Handle
10: Washable HEPA Filter
11: Rechargeable Battery (non-removable)
12: Dirty Water Tank
13: Wheel
14: Brush Guard Release
15: Charge & Clean Base Station
16: Charging Contacts
17: Accessory Storage
18: Cleaning Brush
19: Strainer
20: DC Power Jack
21: Roller Brush
22: Rubber Wiper
23: Carry Handle
24: Charging Contacts
25: Power Adapter
17
16
18
19
20
21
22
25
23
24

6
DIGITAL DISPLAY
Max Suction Mode Eco Suction Mode Clean Water Tank Empty
Battery Low Dirty Water Tank Full Spraying Water
Voice Guidance On/Off Self Cleaning Mode

7
GETTING STARTED
ASSEMBLING THE WETVAC
Remove all parts and accessories from the box prior to assembly.
1: Refertoimageabove.Pushthehandledownrmlyintotheslot.Ensureitissecureandnotabletobe
removed.
2: Install the Clean Water Tank as shown above. Push the top of the tank toward the WetVac
until you hear a click.
3: InstalltheHEPAlterintotheDirtyWaterTankcap.
4: Install the Dirty Water Tank Cap into the Dirty Water tank.
5: Install the Dirty Water Tank as shown above. Push the top of the tank toward the WetVac until you hear
a click.
2
5
1
3 4

8
GETTING STARTED
SETTING THE BASE STATION
CHARGING THE WETVAC
1: Plug the power adapter into a functioning wall outlet.
2: Connect the plug directly into power jack at the back of the Base Station and place the vacuum onto
the Base Station as shown above.
3: When properly docked the digital display will show the current battery charge percentage.
1: Slide the accessory storage part onto the Base Station as shown above.
NOTE: Beforerstuse,thebatterymayrequireupto5hourstofullycharge.Whilecharging,vacuum
enters standby mode. Remove from charging to operate.
1
3
1
2

9
FILLING THE CLEAN WATER TANK
USING YOUR WETVAC
1
2
1: Remove the Clean Water Tank from the vacuum by pushing down on the tank release and pulling the
tank away from the vacuum as shown.
2: Open the latch on the tank as shown above.
3: Fill with tap water and then tightly close the tank latch as shown above.
(Do not use water above 120˚F)
4: Tightly close the tank latch as shown above.
5: Install the Clean Water Tank back into the main unit.
3
4
5

10
CLEANING FLOORS WITH THE WETVAC
USING YOUR WETVAC
1: Press the (Power Icon) button to turn the vacuum on. It will start in ECO mode by default.
2: Press the (Max/Eco button) to toggle between suction modes.
3: Choose a location to start cleaning. Hold the spray button for around 3-5 seconds to prime the roller
 beforetherstpass.Usethetriggerasneededduringthecleaningcycle.
NOTE: Be sure to keep the roller brush
atonthegroundasshown.
FOR BEST RESULTS:
• Useonhardsurfacessuchastileandsealedhardwoodoors.Useonroughsurfacemayimpact
wet suction performance.
• Do not recline the vacuum more than shown in the image below.
• Avoid over watering.
• Avoid vacuuming foamed liquid as that may inadvertantly trigger the Dirty Tank Full sensor.
• DoNotturnthevacuumupsidedownasdirtywatermayowintothemotorassemblyanddamagethe
appliance.
• At the end of each cleaning cycle please carefully follow the instructions for self cleaning and tank
maintenance.
• Pass as many times as needed to remove the mess/debris.
• Forfasterdryingoors,passwithoutholdingthespraytrigger.
2
1
3
Flat to the ground

11
SELF CLEANING
Tank Cap
HEPA Filter
CLEANING AND MAINTENANCE
Your WETVAC is equipped with a self cleaning cycle that automatically performs a cleaning of the roller
brush and main vacuum port. For optimal care, manual cleaning and maintenance may be required to avoid
foul buildup and odors. Please refer to the following sections below.
NOTE: The Self Clean cycle requires some water in the Clean Water Tank and some space in the Dirty Water
Tank. Self-Cleaning can only be initiated while the vacuum is charging on the Base Station.
1
2
3
1: Place the vacuum on the Base Station as shown above.
2: Press the Self Clean button and wait for the cycle to complete, around 1 minute. Repeat as necessary.
3: Empty and clean the Dirty Water Tank immediatley after the Self Clean cycle completes.
TIP: For particularly messy brush housings, pour a small amount of clean water directly into
the Base Station before running the Self Clean cycle.

12
TANK AND FILTER CLEANING
CLEANING AND MAINTENANCE
NOTE: Let all parts dry completely before reassembling.
DRYING TIME
1 2
1: Empty the Dirty Water by pouring through the Strainer tool to separate large debris. Empty large debris
into a trash bin.
2: ThoroughlycleantheDirtyTank.Usemilddetergentifnecessary.RinseallpartsoftheHEPAlterwith
water.
3: Setasidethepartstodrycompletelybeforeassemblingbackintothevacuum.Allowingsucientdrying
time will help avoid buildup and odors.

13
CLEANING AND MAINTENANCE
1
2
34
5
5
1: Release the lock button on the roller brush guard and pull up.
2: Open the brush guard and remove it as shown above.
3: Pull the brush out as shown below and pull up away from the vacuum.
4: ThoroughlycleantheRollerBrushandBrushGuard.Useamilddetergentifnecessary.Cleanthecrevices
of the vacuum housing and main inlet with the cleaning tool provided.
5: Re-assemble in reverse order. Align the tabs of the brush guard with the vacuum to properly as shown
 below.Pushdownuntilthebrushguardclicksintoplace.Inspectthesidestoensuretmentistighton
both sides.
ROLLER BRUSH CLEANING

14
CLEANING AND MAINTENANCE
CHARGING STATION & DRYING TRAY CLEANING
STORAGE
1: UnplugthepowersupplyandremovetheWETVAC before cleaning.
2: Useasoftdampclothtocleanthechargingstationanddryingtray. Wipe down with a dry cloth.
1: Thoroughly clean and dry all parts before storage.
2: TheRollerBrushandHEPAltercanbestoredintheaccessorystoragetrayontheBaseStation.
1
NOTE: The Dirty Water Tank must be cleaned and dried after every single cleaning. The WETVAC must
be stored in a dry and ventilated place without heat sources. Please keep the WETVAC away from direct
sunlight. The battery should be fully charged every 3 months to promote optimal performance.
NOTE: Cloth is not included.

15
CLEANING AND MAINTENANCE
CARE FREQUENCY
EN
Part
Clean Water Tank
Dirty Water Tank
HEPA Filter
Brush Guard
Roller Brushes
Care
Rinse occasionally with
clean water.
Clean and dry after
each use
Clean and dry after
each use
Clean after each use
Clean after each use
Replacement
Never
Never
Every 3-6 Months
Never
Every 3-6 Months
NOTE:Abovefrequencyisonlyforyourreference.Thenalcleaning/replacementfrequencyshould
depend on the usage.
Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: [phone]

16
TROUBLESHOOTING
Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: [phone]
EN
Problems Possible Reasons Solutions
The WETVAC can not be
charged.
The handle control doesn’t
work.
The WETVAC doesn’t work.
The vacuum is getting
weaker.
The clean water tank is
leaking.
1. The power supply is not
connected well.
2. The WETVAC is not fully
seated on the charging
station.
3. Incorrect power adapter.
1. The handle is not fully
inserted into the WETVAC .
2. The battery is low.
1. The Dirty Water Tank is full
or not installed.
2. The battery is not charged.
3. The Roller Brush is not
installed properly.
1. The HEPA lter is blocked.
2. The HEPA lter is not
installed.
3. The brush guard is not
installed properly.
1. The clean water volume is
higher than snue valve.
2. The clean water tank is not
installed well.
3. The cap is not closed tightly.
1. Please re-install the handle.
2. Please check the battery
capacity and fully charge it.
1. Ensure adapter is plugged
into functioning wall outlet.
2. Ensure vacuum is properly
docked. (LCD screen will
light when docked).
3. Please ensure to use the 27V
power adapter included with
your product.
1. Empty and install Dirty
Water Tank.
2. Fully charge the battery.
3. Check and install the Roller
Brush.
1. Please check and clean the
HEPA lter.
2. Please install the HEPA lter
rst.
3. Please follow step 5 on pg.
12 to ensure tight tment of
the brush guard.
1. Pour out water until the
volume is lower than snue
valve.
2. Please re-install the water
tank.
3. Please tightly close the cap.

17
TROUBLESHOOTING
Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: [phone]
EN
Problems Possible Reasons Solutions
No water comes out when
spraying.
The WETVAC doesn’t
work in self-cleaning
mode.
No voice assistance.
1. The clean water tank is
empty.
2. The clean water tank is not
installed well.
3. The sprayer hole’s are
clogged.
1. The WETVAC isn’t
connected with power
supply.
2. The dirty water tank is
full.
3. Lack of water.
The voice function is switched
off.
1. Please ll up the clean water
tank.
2. Please re-install the clean
water tank.
3. Remove the roller brush and
clean any buildup from the
small the small rubber tubes.
1. Please check and connect the
power supply well.
2. Please empty the dirty water
tank.
3. Please ll up the clean water
tank.
Turn on the voice switch.

18
Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: [phone]
ERROR CODES
EN
Error Code Reason Solution
E1, E2, E3, E4
E5, E6, E7
F1
F2, F3
F4
F9
Battery Error. Call Customer Support. Battery pack
may require change.
Battery Temperature Error. Allow product to rest 2 hours
before trying. Ensure product is not
sitting in direct sunlight.
Charging Current Error. Please ensure that the correct 27V
power supply is being used.
Circuit Error. Call Customer Support. Repair or
replacement may be required.
Floor brush movement
restricted.
Ensure that the roller brush and roller
brush housing is clean. Install properly.
Self clean Error. Allow battery to charge, then re-start
self-cleaning mode.

19
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of Silver Point Innovations LLC. Warranty
coverage applies to the original owner and to the original product only and is not transferable. We recommend registering your
product online at www.ihomeclean.com
SilverPoint warrants this product to be free from defects in workmanship and materials, under normal household use and
conditions, one (1) year from the date of original purchase and maintained according to the requirements outlined in this User
Manual. Should this product fail to function in a satisfactory manner, it is best to contact our customer service team at
877-370-4580 so that we may help resolve the matter. Should service be required by reason of any defect or malfunction during
the warranty period, SilverPoint will repair or, at its discretion, replace the product
The One (1) Year Limited Warranty is subject to the following conditions and exclusions:
The original unit and/or non-wearable parts deemed defective, in SilverPoint’s sole discretion, will be repaired or replaced up to
one (1) year from the original purchase date. In the event a replacement unit is issued the replacement product will be
warranted for the remainder of the original warranty period or thirty (30) days from the date of shipment of the replacement
product, whichever is longer. SilverPoint reserves the right to use new, refurbished or used parts in good working condition to
repair or replace any product.
Exclusions:
(1) Normal wear and tear of wearable parts (such as batteries, brushes, HEPA lters, pads, etc.), which require regular maintenance
and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are
available for purchase at www.ihomeclean.com.
(2) Any unit that has been tampered with or used for commercial purposes.
(3) Damage caused by misuse, abuse, negligent handling, failure to perform regular maintenance (i.e., not cleaning the lters), or
damage due to mishandling in transit.
(4) Consequential and incidental damages.
(5) Defects caused by repair persons not authorized by SilverPoint.
(6) Products purchased, used, or operated outside of North America.
Warranty Support:
You must call 877-370-4580 to initiate a warranty claim and have the product on hand during the call. You will need the original
receipt as proof of purchase.
The One (1) Year Limited Warranty does not cover the cost of shipping this product to our service center or its return to the owner.
Please call Customer Service at 877-370-4580 to evaluate your product and receive warranty term instructions.
Disclaimer: This warranty is valid only in the United States of America and does not extend to owners of the product other than to
the original purchaser. In no event will SilverPoint or any of its aliates, contractors, resellers, their ocers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost prots,
actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty gives you specic legal rights, and you may also have other
rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by this disclaimer of
warranty is contractually binding to you upon your transfer of currency (money order, cashier’s check, or credit card) for purchase
of your SilverPoint product.
WARRANTY
Questions? Contact Customer Service
Web/Email: iHomeclean.com
Phone: [phone]