Ikan PT3500-HB-TK User manual

PT3500-HB-TK
Quick Start Guide
15” High Bright Beam Splitter Teleprompter & Hard Case
What’s Included
1 x Teleprompter Base Assembly w/ Glass
1 x PT-CASE Rolling Hard Case
1 x Camera Mount Assembly
1 x Hood
1 x High Bright LCD Monitor w Power Supply
2 x 200mm Riser Rods
1 x PrompterPro 4 Software
1 x 5/32 Hex Key
2 x DRS-01
4 x Cork Strips
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Assembly Steps
Step 1
Place teleprompter base assembly on a flat surface.
Step 2
It is recommended to level the glass at a 45˚ angle, however you can position the glass at any angle that suits your needs.
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Step 3
Slide the camera mount assembly onto the 15mm rods.
The tripod mount has 3 sets of holes that allow you to mount the plate either towards the front or rear to help balance the teleprompter better.
For larger cameras it is recommended to have the plate toward the rear.
For smaller cameras it is recommended to have the place toward the front.
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Step 4
Attach the camera to the mount. Slide the camera mount to the preferred position and secure all thumb screws.
If the camera is required to be positioned higher, you can replace the pre-installed 130mm rods with the 200mm riser rods.
Use the included 5/32” hex key to remove and attach the rods.
DSLR Camcorder
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Step 5
The hood uses magnets to attach to the aluminum frame instead of velcro, making for a quick and reliable attachment/detachment every time.
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Button Configuration & Signal Inputs
Power Switch
I = On = Off
Toggle up to adjust settings
Toggle down to adjust settings
Flip image horizontally
High-Definition Multimedia Interface
Input Connection
Video Graphics Array
DE15 Connection
Composite
BNC Input Connection
Acess monitor settings: Brightness, Contrast, etc.
MENU
FLIP
HDMI
VGA
VIDEO
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

** DO NOT THROW AWAY FOAM CASE **
Foam Case
To make your teleprompter more portable, we packed it in a reusable, high-quality foam.
The shape and size of the foam was designed to fit into Ikan’s PT-CASE which is included in this Travel Kit.
Glass Removal
Glass can be removed from the frame by removing the two Phillips head screws.
Removal is only recommended for replacement or cleaning purposes.
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Specifications
PT3500-HB-TK
Optional Accessories
PT3100-G Replacement Glass for PT3500
Aspect Ratio 4:3
Brightness 1000 cd/m2
Build Material Aluminum / Steel
Contrast Ratio 500:1
Diagonal 15”
Input Signal Composite BNC, VGA, HDMI
Input Voltage DC 12v / 4A
Operating Volts DC 12v / 4A
Power Consumption 10 w
Reading Range 20’
Resolution 1920 x 1080
Supported Video Signals 0-65 C
Viewing Angle 160° (H) / 140° (V)
Shipping Weight 42 lb
Shipping Dimensions 4.1” x 24.6” x 20”
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com

Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: [email protected]
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2018 ikan Corporation. All rights reserved
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
All manuals and user guides at all-guides.com