Ikegami HMM-1850 User manual

08/7,)250$7
LCD COLOR MONITOR
MODEL
H00-185
OPERATION MANUAL


15
3
5
6
7
816
Connecting to BNC Signal Device 9
SDI input signal Format
9
17
Connecting to Component Signal Device 10 17
Component input signal Format
10
18
19
11
Color Only
NTSC Setup
Max Bright
12
14
Input Output
Timecode
HDMI output signal Format Function Key
Marker
Connecting to Composite Signal Device
Contents
Setting
OSD
Caution Load System Default
Product features Bklight Dimming
Monitor View Misc
Source Alias
UMD
Specification
Accessory
Color
Test Pattern
Initial Setup
Basic Information Advanced
Brightness
Contrast
Video
Color Temp
Composite input signal Format
HDMI input signal Format
SDI output signal Format
Connecting to HDMI Signal Device
System Info
H Flip
Scope Position
Waveform Enable
Aspect
Anamorphic
Zoom Mode
Aspect Menu
Scan
Vector Enable
Waveform Source
H/V Delay
Still
A/V Scope
Audio Level Meter
Getting Started
Connections
MENU Features
Other Information
2

ȿ
ȿ
ȿ
WARNING – TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR
MOISTURE.
ȿ
"IMPORTANT SAFETY INSTRUCTIONS"
႒
Read these instructions
႒
Keep these instructions
႒
Heed all warnings
႒
Follow all instructions
႒
Do not use this apparatus near water
႒
Clean only with a dry cloth
႒
Do not block any of the ventilation openings. Install in accordance with he manufacturer's instructions
႒
႒
႒
႒
Only use the attachments/accessories specified by the manufacturer.
႒
႒
8QSOXJWKLVDSSDUDWXVGXULQJOLJKWQLQJVWRUPVRUZKHQXQXVHGIRUORQJSHULRGVRIWLPH
႒
႒
႒
Shall be connected to a main socket outlet
႒
7KHGLVFRQQHFWGHYLFHVKDOOUHPDLQUHDGLO\RSHUDEOH
႒
7KHVRFNHWRXWOHWVKDOOEHLQVWDOOHGQHDUWKHHTXLSPHQWDQGVKDOOEHHDVLO\DFFHVVLEOH
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Caution
It is highly recommended to read and understand the cautions listed below thoroughly before you start using the
product. And if you are unclear with any parts of the cautions or have questions, please contact us.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus
Caution


ȿ
ȿ
Manual contents are subject to change without notice
Explanation of Safety Related Symbols
Caution (cont'd)
4

ȿ
Integrated Converte
r
Multi-Format Signal ViewZ monitors are compatible with various sources including
-HDMI (compatible with DVI)
-S
DI signals: 3G(425A/B), HD, SD
-CVBS(composite) and YPbPr(component)
3G-SDI: 3Gb/sec 4:4:4 HD
SDI-HDMI Loop Through
12Bit Internal Processing
2K Input Capabilit
y
Under Monitor Displa
y
Menu Jog Control Jog dial on the front of the monitor enables users to control all features
W
aveform Monito
r
Vector Scope Monito
r
Pixel to Pixel Mapping
De-Embedded Audio Level Mete
r
Aspect Format Markers 4:3, 14:9, 15:9, 16:9 etc. area, line, safety, center markers display
Gamma Encoding Select Range from 1.0 to 3.0 users selectable. Factory default setting is 2.8
Time Code Time code reader displays embedded LTC or VITC formats
H/V Dela
y
RJ-45 Remote Control
Product Features
SMPTE 425 compliant HD display that supports frame rates of 50.60 in 1080p, 1080i, and
720p
Integrated active SDI-HDMI and HDMI-SDI converter allows the transparent conversion of HD to
HDMI signal or conversion of HDMI back to HD format
Plug in your RJ-45 connector to the back of the monitor and communicate with other ViewZ
monitors (RS-485 control / Tally Light Control)
UMD function displays ancillary data at the bottom of the screen
Onscreen display of video levels with respect to time, used to calibrate multiple camera setups and
vertical blanking level and color burst
Supports full SMPTE 425 signal conversion transparency from SDI to HDMI with test and
measurement overlays
View the blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center
of the screen
De-embedded audio selected out. Auto sensing to display three range meter of
up to 16 ch
1:1 pixel mode displays the original image resolution without scaling to match a certain resolution
or an aspect ratio
On-screen display of chrominance information in Cb and Cr channels. Display can be opaque or
solid against the visual display
2k content can be displayed on ViewZ monitors without the loss of HD signal by converting and
downscaling the content
Allows for color temperature and gamma encoding changes to be implemented quickly. Active
Video Looping supports full 1080p/60 frames on the HDMI output
Product Features


ȿ
Exterior Information
H00-185
monitor 443 x 308 (mm) Stand 443 x 318 (mm)
Front
Rear
13. V mount
14. RS-485 IN
15. RS-485 OUT
16. DC 12V Power in
17. XLR Power in
Monitor View
14. Composite out
15. CVBS IN 1, Component [ Y ]
16. CVBS IN 2, Component [ Pb ]
17. CVBS IN 3, Component [ Pr ]
4. HDMI in
5. VGA in
9. SDI B IN
13. Audio in R
1. XLR Power in
12. VGA
3. HDMI out
8. SDI A IN
10. SDI B OUT
11. SDI A OUT
6. Audio IN / OUT
7. Audio in L
2. RS-485 IN / Out
16. Down
18. Function FA6
19. Function FA7
20. Function FA8
21. Menu control JOG
22. IR Sensor 23. On/Off switch
17. Function FA5
14. Source / Select
15. Scan
13. Speaker out
12. Power LED
1. Volume control
2. Bright control
3. Contrast control
4. Chroma control
7. UP
9. Function FA2 10. Function FA3
11. Function FA4
8. Function FA1
5. MENU
6. EXIT
24. Speaker out
6

ȿ
1
- Turn the main jog to make your selection, and click the jog to select
2
- Press the main jog on the front of the monitor for 2 seconds to enter or exit the menu
-T
urn the jog to move around the menu
- Click the jog to make your selection
3Factory default setting for programmable keys on the front of the monitor
೛೛
F1 UMD Type F2
Function key
HLE-1853G
First Steps
Selecting Input
Menu Control
When the monitor is powered on and connected to your source,
-To select your source, please press SOURCE button
-Factory default is SDI. Please skip this step if you are connected to SDI source
- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press
the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in
menu tree
Marker
F3 Waveform
F5 Blue/Mono
-U
sers can program 8 function buttons on the front by
MENU Function Key Function Key #
H/V Delay
Vectorscope
F7 F8SDI Output
- All features in the monitor can be programmed in one of these keys
F6
F4
HDMI Output
Initial Setup


ȿ
ȿ
1234 5
6
7
1 2345
6
7
Timecode Display Audio Level
meter [ Right ]
Tally Display
Under Monitor Display including source resolution, signal converting status, tally etc.
CH-1
CH-3
CH-5
CH-7
CH-9
CH-11
CH-13
CH-15
CH-2
CH-4
CH-6
CH-8
CH-10
CH-12
CH-14
CH-16
Video Signal information Graph
[ Waveform _ LUMA, Cb, Cr , Vectorscope ]
Display information
Settings you have entered are displayed on the screen with graphs and texts.
Audio Level
meter [ Left ]
Center Maker
Basic Information
8

ȿ
BNC
ȿ
HDMI
BNC SDI signal
3Gbps~270Mbps HDMI signal
OUTPUT
425M(3G)
4 : 2 : 2
1080 60P
ɂɂ
ɂ
1080 23.98p
ɂ
274M
(1.5G)
4 : 2 : 2
1080 24psf
ɂ
1080 24p
260M(1.5G)
4 : 2 : 2 1035 60i
ɂ
1080 30p
ɂ
Signal Formats INPUT
ɂ
1080 25p
ɂ
1080 24p
ɂ
1080 23.98psf
ɂ
ɂɂ
1080 23.98p
ɂɂ
720 60p
ɂɂ
720 x 507 60i
ɂɂ
125M
(270M)
4 : 2 : 2
720 X 487 60i
ɂɂ ɂɂ
ɂɂ
ɂɂ
ɂɂ
ɂɂ
1920 X 1080
1920 X 1200
720 24p
ɂɂ
720 25p
ɂɂ
720 50p
ɂɂ
1080 25p
ɂ
1080 23.98psf
ɂ
296M(1.5G)
4 : 2 : 2
720 60p
ɂ
720 30p
ɂ
1080 60i
ɂ
1080 50i
ɂ
720 25p
ɂɂ
1080 30p
425M(3G)
4 : 4 : 4
720 24p
ɂ ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂɂ
ɂɂ
Signal Formats
ɂ
720 50p
ɂɂ
1080 50p
ɂ
ɂ
ɂ
1080 50i
1080 60i
1035 60i
1080 24psf
1080 24p
1080 30p
1080 50i
1080 60i
ɂ
ɂ
ɂ
ɂ
ɂ
1080 60i
ɂ
1080 50i
ɂ
1080 30p
ɂ
ɂɂ
ɂɂ
ɂɂ
ɂ
ɂɂ
ɂɂ
ɂ
INPUT OUTPUT
ɂ
ɂ
720 50p
ɂɂ
ɂɂ
ɂɂ
720 60p
720 50p
720 30p
720 25p
720 24p
720 X 487 60i
720 x 507 60i
640 X 480
720 X 400
1080 25p
ɂ
ɂɂ
ɂɂ
ɂɂ
ɂɂ
ɂɂ
ɂɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂɂ
720 60p
1080 24p
1080 25p
ɂɂ
ɂɂ
ɂ
ɂ
ɂɂ
ɂ
ɂ
1080 60P
1080 50p
720 24p
720 25p
800 X 600
1024 X 768
1280 X 768
1360 X 768
ɂɂ
Connecting to Various Signals


ȿ
Component
ȿ
Composite
Component Input signal Composite Input signal
1.0Vpp (Y with Sync), 0.7Vpp (Pb,Pr) 1.0Vpp (with Sync)
ȿ
576 50i
&97
[
[
[
[
[




ɂ
ɂ
ɂ
ɂ
Polar
(H/V)
-/-
-/-
+/+
+/+
Standard
9(6$
9(6$
9(6$
9(6$
HLE-1853G
ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
ɂ
50
`
64.999
75.001
78.75
107.999
+/+
+/+
-/-
-/-
+/+
+/+
9(6$
9(6$
9(6$
9(6$
9(6$
9(6$
&975%
&975%
[
[
[
[




79.976
55.621
66.587
74.038
134.999
141.5
138.5
154
-/-
-/+
+/-
+/-
9(6$

46.875
48.363
56.476
60.023
63.981
(MHz)
25.175
31.5
31.5
40
HLE-1853G
[
[
V freq
(Hz)





H freq
(kHz)
31.469
37.861
37.5
37.879
48.077
Clock
1080 60p
ɂ
1080 50p
ɂ
ɂ
Input Signal Formats HLE-1853G
ɂ
ɂ
480 60p
ɂ
480 60i
ɂ
480 50i NTSC

PAL

SECAM

Format
[
[
[
1080 60i
ɂ
1080 50i
ɂ
VGA
VGA Input signal
1.0Vpp (G with Sync), 0.7Vpp (B,R)
720 60p
ɂ
720 50p
ɂ
576 50p
ɂ
Input Signal Formats
Connecting to Analog Signals
10

ȿ
Color Temp
Main ೛Video ೛Color model
Color Copy To used to copy User color temp to 6500K, 7500K, or 9300K
*IMPORTANT
ȿ
Brightness
Main ೛Video ೛Brightness
- adjust the brightness(offset)
-selectable level between [ 0min ~ 100max ]
-shortcut by clicking the main jog 1 time
ȿ
Contrast
Main ೛Video ೛Contrast
- adjust the contrast
-selectable level between [ 0min ~ 100max ]
-shortcut by clicking the main jog 2 consecutive times
ȿ
Color
Main ೛Video ೛Color
- selectable level between [ 0min ~ 100max ]
-shortcut by clicking the main jog 3 consecutive times
ȿ
Color Only
Main ೛Video ೛Color Only
ȿ
ȿ
NTSC Setup Main ሪVideo ሪNTSC Setup
- Select your preferred color type.
[ Color, Green, Red, Blue, Mono ]
- adjust IRE value under NTSC mode between Off ( 0 IRE ) and On ( 7.5 IRE )
Max Bright Main ሪVideo ሪMax Bright
- enabling this feature changes brightness to maximum level (100)
- disabling this feature will apply the previous brightness level
RED bias
- adjusts R, G, B Bias or Offset
- selectable between [-50min ~ 50max ]
GREEN bias
BLUE bias
RED gain
- adjusts R, G, B Gain
- selectable level between [ 0min ~ 100max ]
GREEN gain
BLUE gain
Once user color temp overwrites factory default value of 6500K, 7500K, or 9300K, it will apply PERMANENT change
and monitor reset will NOT restore factory default values
- Select your preferred color temperature settings
[User, 9300K, 7500K, 6500K ]
VIDEO


ȿ
ȿ
1 : 1
1:1 pixel mapping of original image.
This feature is available only when
the size of the original image is
bigger than the screen size.
Zooms in/out of the image to 96%
of its original size without changing
the aspect ratio.
Aspect Main ೛Aspect ೛Aspect
Scan Main ೛Aspect ೛Scan
- This product supports various scan modes
[Zreoscan, Underscan, Overscan ]
Zeroscan Underscan Overscan
Zooms in/out of the image without
changing the aspect ratio. Also,
displays the data at the top of the
horizontal blanking edge.
Zooms in/out of the image without
changing the aspect ratio.
-U
sed to change the display ratio between
[fullscreen, 16:9, 4:3, 1:1 ]
Fullscreen 16 : 9 4 : 3
Enlarges the aspect ratio of the
picture to fit the entire screen.
Stretches the image in “4:3 mode”
to fit to 16:9 aspect ratio.
Cuts left and right of the original
image to fit to 4:3 aspect ratio.
Aspect
12

ȿ
1. 1.37:1 10. 2.35:1 (cinema)
2. 1.50:1 (3:2) 11. 2.37:1
3. 1.55:1 (14:9) 12. 2.39:1 (widescreen)
4. 1.60:1 (16:10) 13. 2.40:1 (widescreen)
5. 1.66:1 (15:9) 14. 2.55:1 (cinema org)
6. 1.75:1 15. 2.59:1 (cinerama)
7. 1.85:1 (widescreen) 16. 2.76:1 (ultra panavision)
8. 2.00:1 (superscope org) 17. 3.56:1
9. 2.20:1 (70mm standard)
ȿ
-U
sed to magnify the image up to 230% of the original display
[ Zoom, Pixel To Pixel, Disable ]
adjust the horizontal position of image [ 0 (left) ~ 100 (right) ]
adjust the horizontal position of image [ 0 (top) ~ 100 (bottom) ]
*IMPORTANT
When Zoom mode is activated, the main jog operates for zoom feature.
ȿ
- Used to monitor blanking area
[ Off, H/V Delay, H Delay, V Delay ]
ȿ
- Used to freeze the display
[ Off, On ]
Anamorphic
Main ೛Aspect ೛Anamorphic
- Select your preferred anamorphic type among 17 options
If the resolution of the input signal is
greater than that of ViewZ monitor,
only area equivalent to monitor
resolution out of the input resolution
will be displayed in this mode
V Position
Clicking the jog once, twice, and third changes to zoom ratio, H position,
and V position.
H/V Delay Main ೛Aspect ೛H/V Delay
Still Main ೛Aspect ೛Still
Zoom Ratio
Used to change zoom ratio between [0min ~ 230max ]
H Position
Zoom Mode Main ೛Aspect ೛Zoom Mode
Pixel To Pixel Zoom
Aspect (cont'd)


ȿ
-U
sed to change the position of scopes
[ Right/Bottom, Right/Top, Left/Bottom, Left Top ]
ȿ
-U
sed to turn on waveform on the screen
[ On, Off ]
ȿ
-U
sers can choose to display scopes of their needs
[ LUMA, Cb, Cr. LUMA/Cb/Cr ]
ȿ
-U
sed to turn on vector scope on the screen
[ On, Off ]
ȿAudio Level Meter
Main ೛A/V Scope ೛Audio Level Meter
-U
sed to turn on 16 channel audio level meter on top of the screen
[ On, Off ]
ȿ
-U
sed to control transparency level of scopes
[ On, Off ]
Waveform Source
Main ೛A/V Scope ೛Waveform Source
Waveform Enable Main ೛A/V Scope ೛Waveform Enable
Scope Position Main ೛A/V Scope ೛Scope Position
Vector Enable Main ೛A/V Scope ೛Vector Enable
Scope Blend Main ೛A/V Scope ೛Scope Blend
- When OSD is on and overlaps with scopes, scope blend automatically turns on even if it is off. When users exit
OSD, scope blend option goes back to user's original setting
R/B
R/T
L/B
L/T
LUMA Cb Cr
Vector
A/V Scope
14

ȿ
OSD
Main ೛Setting ೛OSD
English
used to change the transparency level of OSD [ 0 (opaque) ~ 10 (transparent) ]
OSD Position used to change the position of OSD
ȿ
Load System Default
Main ೛Setting ೛Load Sys Default
-U
sed to reset the monitor to factory default setting
[ No, Yes]
*ex
cept for changes in color temperature (refer to Color Temp in Video section)
ȿ
Temperature Ctrl
Main ೛Setting ೛Temperature Ctrl
used to control both shutdown ref and auto fan ref together [ 2.0Ȕmin ~ 6.0Ȕmax ]
Shutdown Ref panel shutdown temperature setting [ 70ఁmin ~ 90ఁmax ]
Auto Fan Ref temperature setting to turn on/off fan [ 40Ȕmin ~ 60Ȕmax ]
Fan On/Off used to turn on/off fan function [ Auto, Off, On ]
Fan Speed used to set fan speed [auto, slow, normal, fast]
Temperature to check internal temperature of the monitor
ȿ
Bklight Dimming
Main ೛Setting ೛Bklight Dimming
ȿ
Misc
Main ೛Setting ೛Misc
Background Gray gray level in blank section of source [ 0min ~ 7max ]
Gamma Correction used to activate gamma correction on the screen [ On, Off]
*It takes time to change the mode depending on source, screen size, etc.
Gamma Curve when gamma correction is ON, users can change gamma level [ 1.0 ~ 3.0 ]
Key Brightness XVHGWRFRQWUROEDFNOLJKWRIZKLWHNH\VRQWKHIURQW
Front Dial Lock
used to lock bright, contrast, and chroma knob on the front
Power Saving
power saving mode among off, DPMS, and convertor
Language
OSD Blend
- Used to change options in on-screen display
[ Left/Top, Center/Top, Right/Top, Left/Middle, Center/Middle, Right/Middle, Left/Bottom,
Center/Bottom, Right/Bottom ]
-U
sed to control backlight brightness control [ 0min ~ 100max ]
-U
sed to apply changes to below
-U
sed to control temperature of the monitor
Hysteresis
Setting


ȿ
Input Output
Main ೛Advanced ೛Input Output
-U
sed to control input and output signal including embedded converter
Source select output signal [ Disable, SDI, Display, HDMI/ADC ]
Color Format select color space [ RGB, 4:2:2, 4:4:4 ]
RGB Range Select color range of RGB color format [ 0-255, 16-235 ]
YCbCr Range Select color range of 422 or 444 color format
[ Video(16~235), Extended(1~254), Full(0~255) ]
RGB Range Select color range of HDMI input format in RGB [ 0-255, 16-235 ]
YCbCr Range Select color range of HDMI input format in 422 or 444
[ Video(16~235), Extended(1~254), Full(0~255) ]
Output Source Select output signal [Disable, SDI, HDMI/ADC ]
Output Range Select color range of output signal [ Video(16~235), Extended(1~254), Full(0~255) ]
Input Range Select color range of input signal [Video(16~235), Extended(1~254), Full(0~255) ]
ȿ
Timecode
Main ೛Advanced ೛Timecode
-U
sed to show timecode on top of the screen
[ On, Off ]
ȿ
Source Alias
Main ೛Advanced ೛Source Alias
- Provides users with ability to name the input source shown in UMD
Mon i t or
AVI3
Component
HDMI ViewZ
SDI
- example above will name HDMI input source as ViewZ and AVI1 to Monitor
- red box to change alphabet and black box to confirm
ȿ
UMD
Main ೛Advanced ೛UMD
-U
sed to turn on/off UMD and control UMD options at the bottom of the monitor
Off, Signal (info about input/output sources), Function (info about programmable key setting)
-tw
o color (yellow in standard) boxes are additional on-screen tally
HDMI Output
HDMI Input
Color
Blend
UMD Type
SDI Output / Input
AVI1
AVI2
UMD transparency [ On, Off ]
UMD color selection [ white, red, green, blue ]
Advanced
16

ȿ
System Info
Main ೛Advanced ೛System Info
-U
sed to control all additional updates
Firmware Version displays current firmware version
FPGA Version displays current FPGA version
ȿ
H Flip
Main ೛Advanced ೛H Flip
-U
sed to reverse the display image horizontally
[ On, Off ]
*remark: OSD also flips which gives difficulty to read OSD menu
ȿ
Test Pattern
Main ೛Advanced ೛Test Pattern
-U
sed to generate internal test patters
- turn the main knob to select a test pattern in preference
- press the jog for two seconds to exit the test pattern
ȿ
Function Key
Main ೛Function Key
- All front function keys are programmable with any features that are included in the monitor
-O
nly one feature can be assigned per one function key
Function Key 1
Function Key 2
Function Key 3
Function Key 4
Function Key 5
Function Key 6
Function Key 7
Function Key 8
ȿ
Marker
Main ೛Marker
market type selection
[ Off, 16:9, 4:3, 15:9, 14:9, 13:9, 1.85:1, 2.35:1 ]
select input of the safety resolution rate
[ Off, 95%, 93%, 90%, 88%, 85%, 80%, EBU Action, EBU Graphic ]
Marker Type
Safety Area
Center Marker
[ Blue/ mono, HDMI, UMD Type, Waveform,
Vectorscope, H/V Delay, SDI Output, HDMI Output,
Center Marker, Safety Area, Audio Level Meter,
Timecode, Max Bright, Aspect, HDMI CSC, Zoom
Mode, Still, Focus Assist, DSLR Scale, YPBPR, SDI ]
On / Off Center Marker
-U
sed to activate marker feature
Function key
Marker
Advanced (cont'd)


ȿ
Resolution
1366 X 768 (16:9)
Specifications
Lcd spec
Size
18.5 inch
Product *.')
Display Area
Contrast Ratio
1000 : 1
Color Depth
16.7M (8 Bit)
viewing Angle (Typ.) 178°(H) / 178°(V)
Luminance (Max.)
250 cd/m²
Back light Type
LED
Convertor
features
SDI to HDMI
ɂ
SDI to SDI
HDMI to HDMI
ɂ
CVBS to HDMI
ɂ
Case features
Monitor Dim
443 x 308 (mm)
Weight (g)
6500
Stand Dim
443 x 318 (mm)
VGA to SDI
ɂ
CVBS to SDI
ɂ
Comp to HDMI
ɂ
ɂ
HDMI to SDI
ɂ
Comp to SDI
ɂ
INPUT
Connector
SDI BNC
Audio BNC jack
(Component audio L, R )

Audio Phone jack
(Analog Stereo )

VGA to HDMI
ɂ
INPUT
POWER
AC 100~240V
ɂ
DC 12V/24V
( XLR, DC JACK ) ɂ 9;/5
Speaker Built in Speaker 2W X 2

Audio Phone jack
(Analog Stereo )

HDMI 
HDMI 

D-SUB 
Analog BNC
( CVBS,Component )
OUTPUT
Connector
SDI BNC 
Composite BNC 
Specification
18

MODEL H00-185
df
MULTI FORMAT
LCD COLOR MONITOR
OPERATION MANUAL
©-DQ. 201by Ikegami Electronics (86$),QF
ǹAll rights reserved. Reproduction or duplication, without permission of Ikegami
Electronics (Europe) of edition or contents in whole in part, any manner, is prohibited.
ǹSpecifications and design are subject to change without notice


20