Ikegami HPM-9050 User manual

9-inch HDTV Monochrome Monitor
HPM-9050
Ikegami's HPM-9050 9-inch high performance
monochrome monitor with a high resolution CRT
delivers over 800 lines of horizontal resolution.
Switching power supply circuitry provides a wider
range of supply voltages, while its back porch
clamp assures consistent stability for the video
black level.
The HPM-9050 can be combined with a WFM
monitor and/or vectorscope, and also mounted in a
19-inch rack with a two-monitor configuration.
The HPM-9050 is ideally suited for use in
applications such as signal monitoring and
adjustment for video equipment installed in
broadcasting facilities.
••
•• 16:9/4:3 scan function.
•• 19-inch rack mountable.
•• Switching power supply circuitry provides a
wider range of power supply voltages.
•• Back porch clamping assures consistent
stability for the video black level.
•• Dual (A/B) inputs, front panel selectable.
•• Remote control (VIDEO, SYNC,
16:9/4:3, RED and GREEN TALLY
ON/OFF).
•• UL Listed.

HPM-9050
9-inch HDTV Monochrome Monitor
nnSpecifications
nn GENERALS
Power AC100V~240V
50/60Hz, approx. 60W or less
Ambient 0°C ~ +40°C (32°F ~ 104°F)
Temperature 90% or less relative humidity
External 220 x 215 x 255mm (8.66 x 8.46 x 10.04 inches)
Dimensions (W x H x D)
Weight Approx. 7.5 kg (16.53 lbs)
Connector Video input: BNC type (2 systems)
Sync input: BNC type ( 1 system)
Remote input
Tally input
Front Panel Power ON/OFF, Video input A/B,
Controls Sync input EXT/INT, Size NOR/WIDE,
16:9/4:3, Contrast, Brightness
Remote OperationVideo input A/B, Sync input EXT/INT,
4:3/16:9, RED, GREEN tally ON/OFF,
Safety Standard UL, FCC, DHHS
Standard Accessories
Remote Connector, AC Cable, Operation
Manual
nnRATING
Input Signal Analog 1080i(Y)/60, 59.94Hz
1035i(Y)/60, 59.94Hz
Input Level Video Signal: VS 1.0Vp-p or
V 0.7Vp-p, positive
Sync Signal: 0.3Vp-p
Input Impedance Video input/Video sync: 75Ωterminated or
high impedance bridge connection
OutputLevel 25Vp-p
CRT E8069B4
PhosphorColorimetry
6500°K
Operation Continuous
Scanning Size
<16:9 mode> Normal Scan: W160 x H90 mm
Wide Scan: Area of 16:9 aspect ratio where the
picture with touch to the right and left of the
escutcheon.
<4 : 3 mode> Wide Scan: Area of 4:3 aspect ratio where the
picture height in 16:9 touch to the top and bottom
of the escutcheon.
nnPEROFRMANCE
Horizontal 800TV Lines or more at center
Resolution
PowerVoltage Will maintain stable picture quality with a±10%
Fluctuation AC input voltage fluctuation.
X-ray Radiation Less than 0.1mR/H under normal operation at the
place 50mm away from the monitor. (Should not
be over 0.5mR/H even when damaged.)
nnVIDEO Signal System
Frequency 50Hz ~ 30MHz: within +1/-3dB
Response Over 30MHz: Falling
From video input terminal to CRT drive output
refered to 100KHz under the rated output.
Max Gain Approx. 33dB or more
Gain (contrast) Continuously variable from 0 ~ max. gain
Adjustment
nnDEFLECTIONSYSTEM
Sync Stability Stability of synchronization will be met for the
following conditions.
Internal Sync VS Level Change ±6dB
External Sync 0.3V ~ 6Vp-p
Scanning Amplitude Must be adjusted to the rated size of 4:3 or
16:9 aspect ratio.
Deflection Distortion Less than 1% both for
deflection linearity and rater distortion.
Hum Oscillation 0.2mm or less
nnHIGH VOLTAGE
Tolerance Approx. 12KV ±1KV (cut off)
Regulation Less than ±3% over the range of 0 to 200µA
Refered to 100µA.
nnDUAL UNITS
nDimensions
Design and specifications are subject to change without notice.
Ikegami IKEGAMI ELECTRONICS ( U. S. A.), Inc. nn URL http://www.ikegami.com
HEADQUARTERS 37 Brook Ave., Maywood, NJ 07607 Phone [phone] Fax [phone]
WESTCOAST 2631 Manhattan Beach Blvd., Redondo Beach, CA 90278 Phone: [phone] Fax [phone]
SOUTHWEST 526 Bluebird Lane, Red Oak, TX 75154 Phone: [phone] Fax: [phone]
MIDWEST 747 Church Rd., Unit C1, Elmhurst, IL 60126 Phone [phone] Fax [phone]
SOUTHEAST 5200 NW 33rd Ave., Suite 111, Fort Lauderdale, FL 33309 Phone [phone] Fax [phone]