Ikegami CCTV COLOR MONITOR User manual

TFT LCD TV
User’s Manual
CCTV COLOR MONITOR
Part No. 11907101

LCD Monitor User’s Manual

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Location controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Functions and control methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
To connect the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Possible connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

LCD Monitor User’s Manual

Shock Hazard Marking and Associated Graphical Sy bols
Explanation of Safety Related Sy bols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This s mbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that ma be of sufficient
magnitude to constitute a risk of electric shock to persons.
This s mbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompan ing the appliance.
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not E pose This Apparatus To
Rain Or Moisture.

LCD Monitor User’s Manual

Before connecting the AC power cord to the DC adapter outlet ma e sure the voltage designation of
the DC adapter corresponds to the local electrical supply
Never insert anything metallic into the cabinet openings of the Liquid Crystal Display LCD Monitor:
doing so may create the danger of electric shoc 
To avoid electric shoc  never touch the inside of the LCD Monitor Only a qualified technician should
open the case of the LCD Monitor
Never use your LCD Monitor if the power cord has been damaged Do not allow anything to rest n the
power cord and eep the cord away from areas wherepeople can trip over it
Be sure to hold the plug not the cord when disconnecting the LCD Monitor from an electric soc et
Openings in the LCD Monitor cabinet are provided for ventilation To prevent overheating these
openings should not be bloc ed or covered Also avoid using the LCD Monitor on a bed sofa rug or
other soft surface Doing so may bloc the ventilation openings in the bottom of the cabinet
If you put the LCD Monitor in a boo case or some other enclosed space be sure to provide adequate
ventilation Put your LCD Monitor in a location with low humidity and a minimum of dust
Do not expose the LCD Monitor to rain or use it near water
(in itchen near swimming pool etc) If the LCD Monitor accidentally gets wet unplug it and contact
an authorized dealer immediately You can clean the LCD Monitor with a damp cloth when necessary
but be sure to unplug the LCD Monitor first
Place the LCD Monitor on a solid surface and treat it carefully
The screen is made of thin glass with a plastic front surface and be damaged if dropped hit or
scratched
Do not clean the front panel with etontype materials (eg acetone) ethyl alcohol toluene eth
ylacid methyl or chloride  these may damage the panel
Locate your LCD Monitor near an easily accessible AC outlet
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

LCD Monitor User’s Manual

SAFETY NOTES
TThhaann yyoouu ffoorr ppuurrcchhaassiinngg oouurr pprroodduucctt
BBeeffoorree uussiinngg iitt pplleeaassee rreeaadd tthhiiss uusseerr''ss mmaannuuaall ccaarreeffuullllyy aanndd aappppllyy iitt ccoorrrreeccttllyy aanndd ssaaffeellyy
PPlleeaassee eeeepp tthhiiss mmaannuuaall cclloossee ttoo yyoouu ssoo yyoouu ccaann rreeffeerr ttoo iitt aannyyttiimmee aafftteerr rreeaaddiinngg iitt
AAllssoo ffoorr tthhee ttrraannssppoorrttaattiioonn ooff tthhee pprroodduucctt pplleeaassee aattttaacchh tthhiiss mmaannuuaall wwiitthhoouutt ffaaiill
PPlleeaassee oobbsseerrvvee tthhee nnootteess bbeellooww
1. Use at the rated power voltage
Use of nonrated voltage may cause fire electric shoc and brea down
2. Do not open the cabinet and external cover
The high voltage inside of this product may cause the electric shoc 
3. Do not remodel or disassemble this product
Remodeling or disassembling in wrong method may cause fire electric shoc or brea down
4. Do not insert or drop any foreign substance such as metals or flammable object inside from the air hole
It may cause fire electric shoc or brea down
If any foreign substance is inserted inside of this product turn off the power pull the plug out of the soc et and contact the
sales department Do not use the product with the foreign substance in
5. Do not place any vase potted plant cup medicine and any container with water on this product
If the liquid is spilt it may cause the fire electric shoc or brea down
6. Do not place this product with water nor moisten it
If water flows in it it may cause the fire electric shoc or brea down
If there is water inside of the product turn off the power immediately pull the plug out of the soc et and contact the sales
department
Do not use the product with water in it
7. Never touch the antenna lie or power plug if it stars to thunder
It may cause the electric shoc 
8. If any impact is applied the parts inside of the product may be fallen out or bro en to be the cause of fire electric shoc or
brea down
9. Clean the dust on the power plug periodically
The dusty power plug may cause the poor insulation due to the moisture to be the reason of fire
10. Do not destroy process ma e closer to heating device bend or twist forcibly place any heavy object on nor bind the power
cord or power plug If it is used in the bro en condition it may cause fire or electric shoc 
11. Do not touch the power plug with wet hands
If you pull in or out the power plug with wet hands it may cause electric shoc s
12. Put the power plug in firmly
Putting the plug incompletely may cause the electric shoc or fire by the generation of heat
13. Do not use any nonrated power soc et with numerous devices jointed on one power soc et or cable device
The wire of nondesignated capacity may cause the fire due to the generation of heat
14. In case of malfunction turn off the power switch immediately and pull out the power plug
If this product is used in the abnormal condition such as damage to it foreign substance inside of the product generation of
joints smelling smo ing overheating and non production of signal it may cause fire electric shoc or brea down
Turn off the power switch immediately pull the power plug out of the soc et and contact to the sales store
15. Leave space  cm or more from the wall for the installation of the device
Do not install it close to the wall nor bloc the ventilation of the air
Insufficient ventilation or accumulated heat inside of the product may cause the fire
16. Do not install it at the unstable location such as on the bouncing prop or tilted place
It may be tipped over as it loses balance or damaged as it is fallen down

SAFETY NOTES
17. Do not install at the place with moisture or dust
It may cause the fire or the electric shoc
18. Do not install it at the place with poisonous gas
It may cause the fire
19. Do not install it at the location with continuous vibration
It may be tipped over as it loses balance or damaged as it is fallen down
20. Do not install it at the place on the strong magnetic field or current field
It may cause fire electric shoc or brea down
This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment
21. Fasten the wheel of the product or shelf with wheels when installing this product
If it moves or is tipped over it may be damaged
22. Do not leave it in the car under the burning sun for a long time
The high temperature may distort the cabinet or the parts inside may be bro en down or heated
If you use this product in this condition it may cause the fire electric shoc or brea down due to the short circuit or poor
insulation
23. Do not place any fire source such as candlelight close to this product or place it on this product
If it is tipped over or fallen down it may cause damage or fire
24. Do not sprin le water drops or water on this product
It may cause the fire the electric shoc or brea down
25. Do not place heavy objects on this product
It may be tipped over as it loses balance or damaged as it is fallen down
26. Do not transport it with the power cord or the connection cable connected
If you move this product with the power cord or the connection cable connected the damaged power cord connection cable
or connection terminal may cause the fire the electric shoc or brea down
27. Pull the power cord out while holding the plug portion
If you pull the power cord out by force the cord may the fire or the electric shoc 
28. Do not use it outdoor
Dust or rainstorm may cause the fire electric shoc or brea down
29. Do not climb on this product
If you climb on it it may damage or hurt it
30.  persons or more shall transport the device which is heavier than  g
If you drop or tip over the device it may damage it
The weight is indicated on the user's manual
31. Use the attached power cord and connection cable or those which are indicated on the user's manual
If you do not use the designated power cord and connection cable it may cause the electric shoc or brea down
32. Turn off the power switch when connecting the power cord or connection cable
If you not turn off when connecting it it may cause the electric shoc or brea down
33. Do not use any chemical such as the paint thinner or benzine to clean the cabinet
It may scratch the surface or disappear the indication to cause wrong operation whch can be the reason for disorder
34. Clean the cabinet with  time diluted neutral detergent water on smooth cloth as stirring to remove the contamination
After that clean it with dry cloth to remove any stain
LCD Monitor User’s Manual


LCD Monitor User’s Manual

 POWER
 POWER LED LAMP (STAND BY)
 PC
 SVIDEO
 VIDEO 
 VIDEO 
 VOLUME DOWN/UP
 SELECT
 MENU
 VIDEO IN (CH)
 VIDEO OUT (CH)
 VIDEO IN (CH)
 VIDEO OUT (CH)
 AUDIO IN (CH)
 AUDIO OUT (CH)
 AUDIO IN (CH)
 AUDIO OUT (CH)
 SVIDEO
 PC
 AC INLET
 KENSINGTON LOCK HOLE
(15"/17")

LCD Monitor User’s Manual

1. POWER BUTTON
: Press to turn the LCD monitor ON. The POWER LAMP above the switch will illuminate.
2. POWER LED LAMP
: When SET is normally operated, a green lamp is turned on. The green lamp flickers in the status of STAND-BY.
STAND BY : ON/OFF BUTTON is off
3. PC BUTTON
: When you press this button, PC mode is selected.
4. S-VIDEO BUTTON
: When you press this button, S-VIDEO mode is selected.
If you want to see a clean and clear video through S-VIDEO input, select this.
5. V2 BUTTON
: When you press this button, VIDEO2 mode is selected.
Select this button to insert the camera input or video input into VIDEO CH2 terminal.
6. V1 BUTTON
: When you press this button, VIDEO1 mode is selected.
Select this button to insert the camera input or video input into VIDEO CH1 terminal.
7. VOLUME +, - BUTTON
: Adjust the volume up and down.
8. SEL BUTTON
: When you want to select the desired item in menu, press this button to move.
9. MENU BUTTON
: When you press this button, the menu window appears. When you press this button again, the menu window disappears.
1 . 11. 12. 13 VIDEO IN/OUT
: This is the terminal to receive the video from the camera. It is used to connect the video, to connect & record the video, or
to connect many monitors.
14. 15. 16. 17 AUDIO IN/OUTPUT
: It is the terminal to receive the audio from the camera.
It can be used by connecting the e ternal audio equipment.
18. S-VIDEO JACK
: When you want to see a high definition S-VIDEO, use the S-VIDEO input of this monitor. You can enjoy the clean and
clear video.
19. PC JACK
: When you use this monitor as PC monitor, you can use it by connecting the PC Cable to PC Jack of this monitor.
2 . POWER INLET
: Inlet the AC power (AC100~240V, 50/60Hz)
21. KENSINGTON LOCK HOLE
It will be able to prevent a robbery.

LCD Monitor User’s Manual

MENU Operation
When you press the MENU button, the MENU window appears on screen.
Press SEL BUTTON to move to the desired item.
Press VIO+ key to select the desired item.
To shut down the MENU window, wait for time when the MENU window disappears or press the MENU button again.
MENU in VIDEO1, VIDEO2, and S-VIDEO
It shows the MOVE button, SEL button, and EXIT button on a bottom of MENU window.
PICTURE
COLOR TEMP 9300/6500
You can select a temperature of desired color. (9300 K / 6500 K)
CONTRAST Adjust the screen s contrast. (Operate in VIDEO1 mode, VIDEO2 mode, and
S-VIDEO mode)
BRIGHTNESS Adjust the screen s brightness. (Operate in VIDEO1 mode, VIDEO2 mode,
and S-VIDEO mode)
COLOR Adjust the screen s color. (Operate in VIDEO1 mode, VIDEO2 mode, and
S-VIDEO mode)
SHARPNESS
Adjust the sharpness control to obtain the clearest picture.
TINT Adjust the screen s tint. (Operate in VIDEO1 mode, VIDEO2 mode, and
S-VIDEO mode)
UTILITY
ALL BLUE : OFF/ON
When you select ON of ALL BLUE, a full screen is blue.
OVER SCAN : 0%, 5%, 10%
You can select 0% (original screen), 5% (zoom-in screen), or 10% (zoom-in screen) by
selecting OVER SCAN.
OSD
OSD TIMEOUT
You can select the time when OSD window appears on screen in 5 seconds unit up to 5~60
seconds.
OSD TRANSPARENCY
You can select the OSD Transparency in the unit of 20% up to MIN ~ MAX.
LANGUAGE
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL, DANISH, ITALIANO
The above si languages are offered. You can select one of above languages
PICTURE
UTILITY
OSD
LANGUAGE
:MOVE :SEL MENU:EXIT
MAIN MENU

LCD Monitor User’s Manual

MENU in PC / DVI
When you press the MENU Button, the MENU screen appears.
It shows a resolution, vertical and horizontal frequency of current monitor on the bottom of MENU Window.
AUTO ADJUST
Adjust the screen s status in PC mode automatically.
SCREEN
BRIGHTNESS Adjust the screen s brightness
CONTRAST Adjust the screen s contrast
H.POSITION Adjust the screen s horizontal position
V.POSITION Adjust the screen s vertical position
PHASE ADJUST Adjust the screen s phase
CLOCK ADJUST Adjust the screen s horizontal size through a increase/decrease in the
number of Pi el.
COLOR
COLOR TEMP Select the temperature of desired color
(USER / 9300 K / 6500 K)
RED
Adjust the red tint of screen
GREEN Adjust the green tint of screen
BLUE Adjust the blue tint of screen
UTILITY
RECALL Go back to a basic default to be delivered from a factory
FULL AUTO Optimize the screen status in PC mode automatically and set the color
value by re-measuring it
OSD
Same as the operation in VIDEO1, VIDEO2, and S-VIDEO
LANGUAGE
Same as the operation in VIDEO1, VIDEO2, and S-VIDEO
AUTO ADJUST
SCREEN
COLOR
UTILITY
OSD
LANGUAGE
:MOVE :SEL MENU:EXIT
MAIN MENU

LCD Monitor User’s Manual

Be sure to connect the conversion plug to the power plug by the outlet!
This monitor can be available both in AC V / V Hz
Various input voltage (within a range of ACV) can be available
(Do not use it in the voltage higher than a rated voltage)
V/V selector switch is not necessary This monitor can be operated directly without a special operation
CAUTION
Ma e sure to operate this monitor in the rated voltage described in the user s manual or the monitor
(When the voltage higher than the rated voltage is supplied it may give damage to a receiver
If you do not use the monitor for a long time you must pull out the power plug from the inlet for safety
TThhiiss mmoonniittoorr ccaann
bbee aavvaaiillaabbllee
rreeggaarrddlleessss ooff
VV//VV
Plug
Outlet
Conversion plug

LCD Monitor User’s Manual

Video camera
Video Monitor
AUDIO IN
Audio signal cable
VIDEO IN
AUDIO OUT
(through out)
VIDEO OUT
(through out)
Video signal cable
Video camera
Video Monitor
Video camera
VCR or DVD
VCR or DVD
VCR or DVD
S-VIDEO IN
D-SUB 15 PIN
(Analog RGB)
AUDIO OUT
(through out)
VIDEO OUT
(through out)
AUDIO IN
Audio signal cable
VIDEO IN
Video signal cable
PC
S-VIDEO / D-SUB 15PIN connection (Select input S-VIDEO,PC button)
Read the installation/operation manual thoroughl before connecting equipment.
Turn off the power source before connecting the monitor and external equipment.
VIDEO 1 Connection (Select input VIDEO 1 button)
VIDEO 2 Connection (Select input VIDEO 2 button)

LCD Monitor User’s Manual

The screen doesn't appear and
the sound is not heard Is the power cord pulled out?
Is the power turned off?
Is this monitor connected with the
e ternal equipment erroneously?
Is the contrast and brightness
wrongly controlled?
Is this monitor connected with the
e ternal equipment erroneously?
Is the e ternal equipment correctly
connected?
Is the volume turned down?
Is this monitor connected with the
e ternal equipment erroneously?
Is the tint and color correctly
adjusted?
Is the e ternal equipment correctly
connected?
Connect the power cord correctl
Press the power button.
Check the cord and then connect it
correctly.
Adjust the contrast and brightness
correctly.
Check the cord and then connect it
correctly.
Check the cord and then connect it
correctly.
Adjust the volume.
Check the cord and then connect it
correctly.
Adjust the contrast and brightness
correctly.
Check the cord and then connect it
correctly.
The sound is heard but the
video doesn't appear
The video appears but it is
interrupted by static
Not the sound is heard
The screen color is not clear
and clean
The screen is sha en and is
affected by static
If your onitor is out of order, check up the below proble s firstly.

LCD Monitor User’s Manual

This monitor has received the EMI (Electromagnetic interference) test for the business.
Accordingly, a seller or user needs to know about it. If you purchase the erroneous monitor, be sure to
e change it into non-business monitor in the shop where you buy it.