■GENERAL
●Input Voltage
100V ~ 120VAC±10%, 50/60Hz, Single Phase (100V area)
200V ~ 240VAC±10%, 50/60Hz, Single Phase (200V area)
DC Input : +12VDC (HTM-1005R : option)
●Power Consumption
HTM-1005R : 110W (DC : 95W)
HTM-1505R/CS : 150W (with option 240W Max)
HTM-2050R : 200W (with option 240W Max)
●Ambient Temperature
0 ~ 40°C (32 ~ 104°F), 90% or less relative humidly (non-condensing)
●Dimensions
HTM-1005R : 222 (W)✕213 (H)✕415 (D) mm
8.74 (W)✕8.39 (H)✕16.34 (D) inches
HTM-1505R : 450 (W)✕310 (H)✕515 (D) mm
17.72 (W)✕12.20 (H)✕20.28 (D) inches
HTM-1505CS : 350 (W)✕300 (H)✕515 (D) mm
13.78 (W)✕11.81(H)✕20.28 (D) inches
HTM-2050R : 450 (W)✕399 (H)✕515 (D) mm
17. 72 (W)✕15.71 (H)✕20.28 (D) inches
●Weight
HTM-1005R : 10kg (22.03 lbs) approx.
HTM-1505R : 28kg (61.73 lbs) approx.
HTM-1505CS : 25kg (55.11 lbs) approx.
HTM-2050R : 37kg (81.57 lbs) approx.
■RATING
●Input Signal
HDTV :
RGB/Y,PB,PRsignal
BNC 1 input (loop-through)
Corresponding format 1035i/59.94/60
1080i/59.94/60 1080/24pSF
720p/59.94/60 (type 1 only)
* Input 1 channel can be added by using optional extension module.
SDTV :
RGB or Y,PB,PRsignal
BNC 1 input (loop-through)
Corresponding format 525i/59.94
625i/50
* Same input terminal as HDTV
* Input 1 channel can be added by using optional extension module.
●Input Level
HDTV :
RGB/Y,PB,PR(SMPTE274M/296M) input
Y,G,R,B input V : 700mVp-p positive
S : 300mVp-p
PB,PRinput V : 350mVp-p positive
Sync signal input 300mVp-p
HD SDI input (option) 800mVp-p 10% (Rated value)
SDTV :
Composite signal input VS : 1.0Vp-p positive
(option) V : 0.7Vp-p positive
Sync signal input 0.3 ~ 6Vp-p negative
RGB signal input VS : 1.0Vp-p positive
V : 0.7Vp-p positive
*In case sync signal on all R,G,B signals, sync signal on only G signal
and no sync signal on all R,G,B signals.
Y,PB,PRsignal input (SMPTE/N10)
Y WHITE level : 700mVp-p
SETUP level : 0mVp-p
SYNC level : 300mVp-p
PB,PR525mVp-p (100/0/7.5/75/7.5 Color Bar)
*Other signals except for standard signal can be changed by front panel.
SD SDI input Rated value 800mVp-p
(option)
●Input Impedance
HDTV :
RGB/Y,PB,PRinput : High impedance bridge connection or
75 Ωtermination
(75 Ωtermination plug is an option.)
HD SDI input : 75 Ωtermination only
SDTV :
Composite input, Sync input: RGB input, Y,PB,PRinput:
High impedance bridge connection or 75 Ωtermination
(75 Ωtermination plug is an option.)
SD SDI input : 75 Ωtermination
■PERFORMANCE
●CRT
In-line gun, Dot-shadow mask, high resolution CRT
●Dot Trio Pitch
HTM-1005R : 0.28mm
HTM-1505R/CS (Type 1): 0.28mm
HTM-2050R : 0.28mm
●Horizontal Resolution (at picture center)
HTM-1005R : 500TV lines or more (at HDTV)
HTM-1505R/CS : 750TV lines or more (at HDTV)
HTM-2050R : 900TV lines or more (at HDTV)
●Maximum Brightness
HTM-1005R : 200cd/m2or more
HTM-1505R/CS : 240cd/m2or more
HTM-2050R : 170cd/m2or more
* 100% Window Signal, BRIGHTNESS PRESET,CONTRAST MAX
■VIDEO SIGNAL SYSTEM
●Frequency Response
HDTV :
HTM-2050R 60Hz ~ 25MHz +1dB/-3dB
25MHz ~ 30MHz 3dB
HTM-1505R/CS 60Hz - 25MHz +1dB/-3dB
HTM-1005R 60Hz ~ 17MHz +1dB/-3dB
SDTV :
HTM-2050R 60Hz ~ 10MHz +1dB/-3dB
HTM-1505R/CS
HTM-1005R 60Hz ~ 7MHz +1dB/-3dB
●Sag within 5%
●Black Level Stability within 1% (APL 10% ~ 90%)
●Noise
HTM-2050R Coherent Noise : - 46dB or more
HTM-1505R/CS Hum Noise : - 50dB or more
Random Noise : - 50dB or more
Coherent Noise : - 40dB or more
HTM-1005R Hum Noise : - 40dB or more
Random Noise : - 40dB or more
■DEFLECTION/SYNC SYSTEM
●Scan
HDTV
Normal scan (16:9) / Under scan (16:9) /
HD 4:3 scan (The expansion of 4:3 area)
SDTV
Normal scan (4:3/16:9) / Under scan (4:3/16:9)
●Deflection Distortion
Within 1% of picture height
(Distortion linearity and raster distortion)
●Sync Stability
Operation will be stable when the input signal falls within the following
parameters ;
Internal sync : ±6dB in rated video input level values
External sync : External sync input level is 0.3~6Vp-p
●Convergence
Within circle of 90% of picture height : within 0.4mm
Within circle of 90% of picture width : within 0.5mm
■HIGH VOLTAGE
Tolerance : 19 kV±1kV (HTM-1005R)
: 25 kV±1kV (HTM-1505R/CS)
: 26 kV±1kV (HTM-2050R)
Voltage fluctuation : Within±0.5% for beam current of between
0~600uA (with 100uA as reference)
(HTM-2050R/1505R/CS)
0~300uA (HTM-1005R)
* STD : Standard * OPT : Option * Analog component : Y PBPRor R G B * Digital composite : NTSC only
❚
Specifications
<H D T V ><S D T V >
1080i
1080/24p
720p 480i/575i 480p
Analog HD HD Analog HD Analog Analog Digital Digital Analog
component
SDI SDI
component
SDI
component composite component composite component
Type 1 (HTM-2050R) STD OPT OPT STD OPT STD OPT OPT OPT OPT
Type 2 (HTM-2050R) STD OPT OPT OPT STD OPT OPT OPT OPT
HTM-1505R/1505CS/1005R STD OPT OPT STD OPT STD OPT OPT OPT OPT