Ikelite 5509.33 User manual

Zoom Gear for Sigma 10-20mm F4.5-5.6 EX DC HSM
Product Number 5509.33
Diagram A
Zoom Gear
Retainer Tool
Zoom Gear
Port Mount
Zoom Gear
Retainer
Zoom Gear for Sigma 10-20mm F4.5-5.6 EX DC HSM
Product Number 5509.33
Diagram A
Zoom Gear
Retainer Tool
Zoom Gear
Port Mount
Zoom Gear
Retainer
Zoom Gear for Sigma 10-20mm F4.5-5.6 EX DC HSM
Product Number 5509.33
Diagram A
Zoom Gear
Retainer Tool
Zoom Gear
Port Mount
Zoom Gear
Retainer
Zoom Gear for Sigma 10-20mm F4.5-5.6 EX DC HSM
Product Number 5509.33
Diagram A
Zoom Gear
Retainer Tool
Zoom Gear
Port Mount
Zoom Gear
Retainer

Zoom Gear Installation
1. If necessary, remove black dust cap from housing port
hole before installing Zoom Gear. Rotate the Zoom Gear
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Gear Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.33_Zoom_Gear_1-1217
©2017 Ikelite Underwater Systems
Diagram B Diagram C
Zoom Gear Installation
1. If necessary, remove black dust cap from housing port
hole before installing Zoom Gear. Rotate the Zoom Gear
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Gear Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.33_Zoom_Gear_1-1217
©2017 Ikelite Underwater Systems
Diagram B Diagram C
Zoom Gear Installation
1. If necessary, remove black dust cap from housing port
hole before installing Zoom Gear. Rotate the Zoom Gear
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Gear Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.33_Zoom_Gear_1-1217
©2017 Ikelite Underwater Systems
Diagram B Diagram C
Zoom Gear Installation
1. If necessary, remove black dust cap from housing port
hole before installing Zoom Gear. Rotate the Zoom Gear
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Gear Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.33_Zoom_Gear_1-1217
©2017 Ikelite Underwater Systems
Diagram B Diagram C