ikross IKHD74 User manual

Clamp
Foldable buttom supports
Clamp release button
Phone Width Support : 50-105 mm
HOLD YOUR DEVICE
Press clamp release button to
extend the clamp.
Put your device onto the holder and
push the clamp back to secure your device.
AIR VENT MOUNT
HOLDER
Attach the holder onto the holder connector. Slide down the holder to secure.
360° Rotate ball joint
NOTICE :
Before adjust the ball joint, please remove the
mount from the air vent.
NOTICE :
If the clamp touches VOLUME+/- or POWER
button, you can fold buttom supports to adjust
your phone position in holder.
Clamp release button
Holder connector
ASSEMBLY of MOUNT & HOLDER

Car Air Vent Mount
Holder for Smartphone
IKHD74USER’S MANUAL
INSTALLATION
Press & hold the clamp release button and
install the mount onto the air vent then release
the button to secure.
NOTE : Recommend to install the mount on the bottom of the air vent.