iLive IAEBT209 v2758-01 User manual

Truly Wire-Free Earbuds
User’s Guide for Model IAEBT209 v2758-01
Charger Power
ON/OFF
Main Function Button
Press and hold to power ON.
Press and hold to power OFF.
Earbud Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds in their docking
stations. Be sure to press down so the earbuds make
contact with the charging contacts.
2. When charging, the indicator LEDs on the earbuds will
turn red. When charging is complete, the indicators will
turn blue.
Charging the Case
Using a Micro-USB to USB cable, connect
to the USB port of a powered on computer
or USB power adaptor (not included) to
charge the case.
Microphone
Charger Battery Indicator LED
Flashing red when charging.
Red when charging is complete.
Charger Power Indicator LED
Blue when ON.
NOTE: Each earbud must be
powered on separately.
Once they are linked, powering o
one earbud will power o both.
Earbud Indicator LED
Red when charging.
Blue when fully charged.
Notes On Charging and Use
• Each earbud must be powered on separately.
• Once the earbuds are linked, powering o one earbud
will power o both.
• Placing the earbuds in the charging case will
automatically power them o.
• Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device. The earbuds must have been linked
and connected to a bluetooth device beforehand.
L R
IAEBT209-2758-03-IB-EN - FD - 19Apr2021.indd 1 4/19/2021 12:29:12 PM

Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2019 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
Speakerphone
1. To accept a call, press the Function button, or use the
controls on the connected phone. To end a call, press the
Function button again.
2. To re-dial the last dialed number, press the Function
button twice.
Initial Linking of Earbuds &
Pairing to a Bluetooth Device
1. To link the earbuds manually, press and hold the
Function button on both earbuds until they start
blinking blue and red. They will automatically pair with
each other, when successfully linked, one of the earbud’s
indicator LEDs will begin blinking blue and red. A voice
prompt will also announce the connection.
2. With the earbuds linked, you can now connect to your
Bluetooth device. The LED indicator on one of the
earbuds will ashing blue and red, indicating it is ready
to pair to a Bluetooth device.
3. On your Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select IAEBT209 when
it is discovered. When successfully connected to your
Bluetooth device, the LED indicator will slowly ash blue
and a voice prompt will announce the connection.
4. Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
Charging Case & Auto-On Feature
1. Placing the earbuds in the charging case will
automatically power them o and begin charging.
2. Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device (earbuds must have been linked and
connected to a Bluetooth device already).
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.
“WARNING : Cancer and Reproductive harm - www.
P65Warnings.ca.gov.”
For Earbuds, FCC ID: 2AHI6IAEBT209
IAEBT209-2758-03-IB-EN - FD - 19Apr2021.indd 2 4/19/2021 12:29:12 PM