PLEASE NOTE: Due to the nature of truly
wireless earbuds, you may experience
slight interruptions with your audio in
areas with multiple 2.4Ghz bands or in
high wireless traffic areas.
Pairing Bluetooth
Note: When earbuds are powered on they automatically
link and enter into pairing mode. You can power on a single
earbud to use as a single unit if you wish.
1.
With the earbuds linked, you can now connect to your
Bluetooth device.
2.
On your Bluetooth device, access Bluetooth Settings and
search for nearby devices. Select
IAEBTNQ102
when
it is discovered. When successfully connected to your
Bluetooth device, a voice prompt will announce the
Bluetooth connection.
3.
Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
Charging Case & Auto-On Feature
While the case power is ON:
•
Placing the earbuds in the charging case will
automatically power them off and begin charging.
•
Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device (earbuds must have been linked and
connected to a Bluetooth device already).
Active Noise Canceling
The
Active Noise Canceling
feature will electronically mute
background noise. It can be used to enhance the quality of any
music or audio that is playing through the earbuds.
Transparent Mode
enables the earbuds to pick up external
sounds, so you can stay aware of your surroundings.
Wireless Charging
The earbud charging case can be charged wirelessly. If you
have a wireless charging pad or device, you can set the case
onto the wirless charger and power your earbud case.
Additional iPhone Settings
If you are using an iPhone there are a few additional settings
and controls for the earbuds. You can access these by going
into your iPhone Bluetooth settings and tapping the blue “i”
symbol next to the IAEBTNQ102 label.
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: partsinfo@dpiinc.com
ForWarrantyInformation andthe most up-to-date version of
this User’s Guide, go to
www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specifications are subject tochange without
notice.
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
•WARNING: To prevent fire or shock hazards, do not expose this unit to rain
or moisture.
•WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
•Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
•This product meetsand complies with all Federal regulations.
•To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
FCC ID：2A3OUIAEBTNQ102
