iLive IAHB56 User manual

Features & Controls
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings and Precautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of
according to state and local guidelines. They should never be disposed of in normal household waste,
and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth
defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Built-in microphone
• Micro-USB port for battery
recharge
• Aux in (3.5mm audio input)
• Adjustable headband
• On-ear controls
• DC battery power: built-in
rechargeable lithium ion battery
• Battery life: approx. 9 hours
Includes
• Micro-USB to USB cable
• 3.5mm audio cable
• Carry pouch
Bluetooth Wireless Headphones
User’s Guide for Model IAHB56 v1550-01
Earcup Adjustment
Power Switch
Slide to power the unit
ON or OFF.
Pair
Press and hold for 7 sec. to turn the
unit on and begin pairing.
Aux In
DC Power Input
Power/Pairing
Indicator Light
Volume +/-
Press to adjust volume up or down.
Play/Pause/Answer
Press to play or pause the current
track.
Press to answer or end an incoming
call.

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the
support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2015 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Using the Audio Input
Requires a 3.5mm audio cable (included).
Aux In mode will function even if the headphones are not powered ON.
To conserve battery power, keep them powered OFF when using Aux In.
1. Connect a 3.5mm audio cable to the Aux In on the unit and the
audio output on an audio device.
2. Use the controls on the connected device to select and play your audio
through the headphones.
Using the Speakerphone
1. When a call is received, a ringtone will sound through the headphones.
2. Press the button to accept the call or accept the call with the native
controls on the connected device.
3. The incoming call received through the device will now be heard through
the headphones.
4. To end the call, press the button or end the call using the controls on
the connected device.
Aux In
Playing Audio Wirelessly
1. To play or pause the selected track, use the native controls on the
connected Bluetooth Device or press the Play/Pause/Answer button.
2. Audio played through the connected Bluetooth device will now be heard
through the headphones.
STATUS INDICATOR
Power On Flashing blue light
Power O No light
Charging Solid red light
Charging Complete No light
Pairing Flashing red and blue lights
Bluetooth
Pairing a Bluetooth Device for the First Time
1. Power on the unit and hold the Pair button for approximately 7 seconds.
2. The indicator will ash red and blue. When pairing, remain within 3 feet
of the unit.
3. Using the controls on your Bluetooth device, select the IAHB56 in your
Bluetooth settings to pair.
4. If your device requests a password, enter the default password 0 0 0 0 .
5. Refer to the user’s manual for your specic device for instructions on pairing
and connecting Bluetooth devices.
6. After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
7. If your device should become unpaired or you nd it is unable to connect,
repeat the above steps.
LED Indicators
Charging the Battery
Requires a Micro-USB to USB cable (included).
1. Using a Micro-USB to USB cable (included), connect to the USB port of
a powered on computer or USB power adaptor (not included).