iLive IAEBTW53 User manual

Waterproof Truly Wireless Earbuds
User’s Guide for Model IAEBTW53 v3048-01
Multi-Function Button
Note: The Function Touch Pad is sensitive and must be
touched or tapped to operate properly.
General
Tap and hold for 3 seconds to power ON
Tap and hold for 5 seconds to power OFF.
Phone Calls
Tap to answer/end phone calls.
Tap and hold for 2 seconds to reject incoming calls.
Voice Assist
Tap and hold for 2 seconds to activate Voice Assistant (LEFT).
Music
Tap to play/pause music.
Tap twice to skip to next track (RIGHT).
Tap twice to play previous tracks (LEFT).
Tap 3 times to turn volume up (RIGHT).
Tap 3 times to turn volume down (LEFT).
Charging Contacts
Earbud Indicator LED
Red when charging.
Lights o when fully charged.
Features
• Bluetooth v5.3: range approximately 60ft.
• IPX7 Waterproof protection
• Built-in microphone
• Handsfree calling
• Rechargeable battery: up to 7 hours at 50%
volume
Includes
• Wireless earbuds
• Charging case
• Ear tips (small, medium, and large)
• USB-C charging cable
• User manual
Multi-Function Button
Microphone
Controls and Functions
R
L
1%–25%(Power)
25%–50%(Power)
50%–75%(Power)
75%–99%(Power)
Charging the Case
The earbuds have a total battery life of approximately 7 hours at 50% volume. To
charge the case, use the USB-C to USB cable (included), to connect to the USB port
of a powered-on computer or a UL certied USB power adaptor (not included). When
the case is charging the Power Indicator LED will light up. The total charge time for
the case is approximately 2 hours.
Case Power Indicator
LED Guide

Reconnect Bluetooth
If you have trouble connecting the earbuds and your device or
if the earbuds become unpaired, do the following:
1. Delete IAEBTW53 from your list of devices in your
Bluetooth settings
2. Press and hold the Multi-Function Button for 5
seconds to turn the earbuds o. Press and hold the
Multi-Function button for another 3 seconds to turn the
earbuds back on.
3. Return the earbuds to the case. Remove them and allow
them to automatically enter pairing mode. Connect to
your Bluetooth device using the steps above.
Pairing Bluetooth
Note: When earbuds are powered on, they automatically
link and enter pairing mode. You can power on a single
earbud to use as a single unit if you wish.
1. With the earbuds powered on, you can now connect to
your Bluetooth device. The LED indicator on the earbuds
will ash red and blue, indicating it is ready to pair to a
Bluetooth device.
2. On your Bluetooth device, search for nearby devices in
your Bluetooth settings and select IAEBTW53. When
successfully connected to your Bluetooth device, a voice
prompt will announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2023 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Charging the Earbuds
1. Open the cover and place the earbuds on the charging
contacts. Be sure to match the left and right earbuds
with the correct docking station in the case.
2. Earbud Indicator LED will turn red when charging.
When fully charged, the LEDs will turn o. Charging time
for the earbuds is approximately 2 hours.