Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2019 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable
and should be recycled or disposed of according to state and local
guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might
explode. Contact your local government for disposal or recycling
practices in your area.
• To avoid hearing damage, make sure that the volume on your
music player is turned down before connecting your headphones.
After placing headphones in/on your ears, gradually turn up the
volume until you reach a comfortable listening level.
Speakerphone
1. To accept a call, press the Function button, or use the
controls on the connected phone.
2. To end a call, press the Function button, or use the
controls on the connected phone.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with all Federal
regulations.
Previously Connected Devices
• To manually pair to another device, press the
Function button quickly two times. The earbuds
will enter pairing mode and can connect to a
new device.
• The earbuds can remember multiple Bluetooth
devices and will always try to re-connect to the
last device used.
• To re-connect to a dierent device, turn o
Bluetooth on unwanted devices, then access the
Bluetooth settings menu on the device you wish
to use and select IAEBT20.
Troubleshooting
If the earbuds should become unpaired or will not
connect normally, follow these steps in your device’s
Bluetooth Settings Menu.
1. Delete the earbuds (“Forget This Device”).
2. Turn Bluetooth OFF then ON again, and repeat
the Initial Bluetooth Connection steps.
Made
Green
Initial Linking of Earbuds &
Pairing to a Bluetooth Device
1. To link the earbuds manually, press and hold
the Function button on both earbuds. They
will automatically pair with each other, when
successfully linked, a voice prompt will also
announce the connection.
2. With the earbuds linked, you can now connect
to your Bluetooth device. On your Bluetooth
device, access Bluetooth Settings and search
for nearby devices. Select IAEBT20 when it is
discovered. When successfully connected to your
Bluetooth device, a voice prompt will announce
the connection.
3. Audio played through the connected Bluetooth
device will now be heard through both earbuds.
Use the controls on the connected device to play
audio and adjust volume.
PLEASE NOTE: Due to the nature of truly
wireless earbuds, you may experience
slight interruptions with your audio in
areas with multiple 2.4Ghz bands or in
high wireless trac areas.
“This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.”
