iLive IAEBT40 User manual

Truly Wire Free Earbuds
User’s Guide for Model IAEBT40 v2712-01
Charging Contacts
Function Button
Press and hold for 5 seconds to power ON/OFF.
Press to play/pause music.
Press to answer/end phone calls.
Press and hold for 2 seconds to reject incoming calls.
Press and hold for 2 seconds to activate voice assistant. (SIRI or Google
assistant) Quickly press twice to skip to next track (RIGHT).
Quickly press twice to play previous tracks (LEFT).
Quickly press three times to turn volume up (RIGHT).
Quickly press three times to turn volume down (LEFT).
Earbud Indicator LED/Microphone
Red when charging.
Lights off when fully charged.
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging
contacts. Be sure to match the left and right earbuds with
the correct docking station in the case.
2. When charging, the first and fourth Power & Battery
Indicator LEDs on the case will flash blue. When charging
is complete, the indicator LEDs will turn off.
3. Earbud Indicator LEDs will turn red when charging. When
fully charged, the LEDs will turn off.
Power & Battery Indicator LEDs
The 4 blue LEDs represent the amount of
battery the case charger has.
1 LED=25%
2
LEDs=50%
3 LEDs=75%
4 LEDs=100%
Charging the Case
Using a USB-C to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor (not
included) to charge the case. When the
case is charging the Power & Battery
Indicator LEDs will flash blue. When fully
charged all LEDs will turn solid blue.
IAEBT40-2712-01-IB - 04Mar2021.indd 1
3/4/2021 4:45:45 PM

Pairing Bluetooth
Note: When earbuds are powered on they automatically link
and enter into pairing mode. You can power on a single
earbud to use as a single unit if you wish.
1. With the earbuds linked, you can now connect to
your Bluetooth device. The LED indicator on the
right earbud will continue flashing blue and red,
indicating it is ready to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select IAEBT40 when
it is discovered. When successfully connected to your
Bluetooth device, the LED indicator on both of the
earbuds will flash blue, slowly and a voice prompt will
announce the Bluetooth connection.
3. Audio played through the connected Bluetooth
device will now be heard through both earbuds.
Use the controls on the connected device to play
audio and adjust volume.
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions with
your audio in areas with multiple 2.4Ghz bands or in high
wireless traffic areas.
Speakerphone
• To accept or end a phone call, press the Function button.
•
You can also use the controls on the connected
phone to handle phone functions.
Charging Case & Auto-On Feature
While the case power is ON:
• Placing the earbuds in the charging case will
automatically power them off and begin charging.
• Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device (earbuds must have been linked and
connected to a Bluetooth device already).
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Additional Warnings
• WARNING: To prevent fire or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
•To avoid hearing damage, make sure that the volume on your music player is
turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
IAEBT40-2712-01-IB - 04Mar2021.indd 2
3/4/2021 4:45:45 PM