iLive IHB18 v2138-01 User manual

Overview
Wireless Speaker System with Subwoofer
User’s Guide for Model IHB18 v2138-01
Features
• 2.1 channel stereo sound
• Built-in amplier
• 3 speakers: left, right, and subwoofer
• Bluetooth Wireless range: 60 ft
• Voice prompts announce speaker functions
• Analog volume control
• Aux In (3.5 mm audio input)
• AC power: built-in AC power cable
Includes
• 3.5mm audio cable
• User’s guide
FCC WARNINGS
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ADDITIONAL WARNINGS
• WARNING: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• WARNING: Shock hazard - Do Not Open.
• Caution and marking information is located at the rear or bottom of the apparatus.
• Mains plug is used as disconnect device and it should remain readily operable during intended use. In
order to disconnect the apparatus from the mains completely, the mains plug should be disconnected
form the mains socket outlet completely.
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
• Objects lled with liquids, such as vases, shall not be placed on the apparatus
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or
sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining
where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass
between the unit and the surface to reduce the risk of damage and/or staining.
Volume Up/Down
Pair Bluetooth/Source
Press and hold to pair.
Press to change source between
Bluetooth and Aux In.
LED Indicator
Bluetooth Pairing = Flashing Blue
Bluetooth Paired = Solid Blue
Aux In = Green
Power ON/OFF
Aux In
(3.5mm Audio Input)
WARNING : This product can expose you to chemicals including lead, which is known to
the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov. This product meets and complies with all
Federal regulations.
Power
Connect the power plug to a
standard power outlet.
Connect Speakers
Connect the left and right speaker cables to the left and right
audio outputs on the subwoofer.

Aux In
Requires a 3.5mm audio cable (included).
1. Power ON the unit and press the Source button to switch to Aux In Mode.
2. Connect a 3.5mm audio cable to the Aux In on the subwoofer and the
audio output/headphone jack on a smartphone or other audio source.
3. Use the controls on the connected device to select audio, play, pause, skip,
and adjust the volume.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: par[email protected]
Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
INTERNATIONAL SUPPORT
Protect for Today
Sustain for Tomorrow
Made
Green
Bluetooth Wireless Audio
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the steps listed here.
1. Power ON the unit and press the Source button to switch to Bluetooth
Mode.
2. Press and hold the Pair button to begin pairing. The LED Indicator will
begin quickly ashing blue. When pairing, remain within 3 feet of the unit.
3. From your smartphone or other Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select IHB18 when it is discovered. Refer to
the user’s manual for your specic device for further instructions on pairing
and connecting Bluetooth devices.
4. When successfully paired, the LED indicator will turn solid blue and an
chime will sound from the speaker.
5. Audio played through the connected Bluetooth device will now be heard
through the speakers. Use the controls on the connected device to select
and begin playing audio.
Previously Connected Devices
• The system can remember multiple Bluetooth devices and will always try to
re-connect to the last device used.
• To re-connect to a dierent device, turn o Bluetooth on unwanted devices,
then access the Bluetooth settings menu on the device you wish to use and
select IHB18.