Illuminati IM150 User manual

Installing the batteries and powering on
Insert two AAA batteriesOpen the case
Replace the lid, starting
with the hook
Press the power button.
LEDs will flash white
IM150
QUICKSTART
TM
Thank you for purchasing a IM150 light
and color meter. Please visit our website
to view the user manual, additional
information, and instructional videos:
www.illuminatiinstruments.com

Install the app.
Search for
“Illuminati Meter”
11
Start the app
22
Turn the meter on
33
Tap
“Scan”
to
connect
44
55
Tap “Done” to finish
Welcome to the Tile
screen. Each tile shows
key information. Tap a
tile to open it. The “+”
button lets you add
more tiles.
66
Using with an iPhone

Take a reading
Device settings
Adjust exposure
compensation
Red spinner
shows meter
recommendation
Enable strobe
metering
Enable
continous
readings
Tap to select
exposure mode
Swipe spinners
up/down to
change settings.
Tap to select
metering mode
Measuring Exposure
Measuring Color
Take a reading
Enable
continous
readings
Color
temperature
reading
Dot shows color
temperature and
tint
Manage filter gel
options
Swipe to pan
color chart.
Pinch to zoom
Tap to select
color mode

Install the app.
Search for
“Illuminati Meter”
11
Start the app
22
Turn the
meter on.
Swipe down
to start
scanning
33
Once
detected,
meter will
connect
44
55
Tap back arrow
to finish
Welcome to the Tile
screen. Each tile shows
key information. Tap a tile
to open it. Tap the “+” to
add more tiles. There are
many types
66
Using with an Android Phone

Measuring Color
Take a reading
Enable
continous
readings
Ambient color
tint in full
green/magenta
steps
Strobe color
temperature
reading
Strobe color
shift in full
magenta/green
steps
Ambient lighting
color
temperature
Tap to select
color readings
Take a reading
Device settings
Adjust exposure
compensation
Red spinner
shows meter
recommendation
Enable continous
readings
Enable strobe
metering
Tap to select
exposure mode
Swipe spinners
up/down to
change settings.
Tap to select
metering mode
Measuring Exposure

Copyright 2019, Illuminati Instrument Corp., All rights reserved.
Google Play and the Google Play logo are trademarks of Google LLC. Apple and the
Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
2019-11-10 IM150_QSG_rev2
For more product information, please visit our
website: www.illuminatiinstruments.com
Unbonding the meter from a device
The meter will pair with up to eight devices over
Bluetooth. If you experience connection problems or
ever need to unbond the meter from a device, use the
following procedure:
1. Turn the meter off by holding the
power button for 3 seconds.
2. Hold the power button until the
LEDs flash purple (About 6 sec)
3. Go to your device’s Bluetooth
settings and “Forget” (iOS) or
“Unpair” (Android) the meter.
Handheld
On a table top
Onto
a
whiteboard
Clipped
onto a
backdrop
Clipped
onto
clothing
Onto a
tripod
or
stand
Mounting and using accessories