Iluv TimeShaker WOW User manual

TimeShaker® WOW
Jumbo LED Dual Alarm Clock with
Strong Wired Bed Shaker
TSBOOMWOW
Ver 1.2
User Manual
English

Main Unit
Power Adaptor
Wired Shaker
WHAT’S INCLUDED
2

16
17 18 2019
Shaker
3
16. ALERT LIGHT ON/OFF
17. 12/24 TIME FORMAT
18. DAYLIGHT SAVING TIME
19. SHAKER PORT
20. DC POWER INPUT JACK
PRODUCT OVERVIEW
3
12
3
4
5
Snooze I Dimmer Alarm Time
6
7
89
10
Top
Front
Back
1. SNOOZE/DIMMER
2. ALARM SETUP
3. TIME SETUP
4. TIME/ALARM INCREASE
5. TIME/ALARM DECREASE
6. DISPLAY
7. PM INDICATOR
8. ALARM 1 INDICATOR
9. ALARM 2 INDICATOR
10. LOW BATTERY INDICATOR

Serial No.:1FE00000
20
21
21. BACK-UP BATTERY
COMPARTMENT
22. WIRED SHAKER
Left
Right
Bottom
13
14
15
Charge
for
Phone
11
12
11. ALARM ON/OFF & SET: ALARM1+2,
ALARM 1/SET, ALARM 2/SET
12. WAKE TO:
PANIC SOUND+VIBRATION,
VIBRATION, PANIC SOUND
13. PANIC SOUND VOLUME CONTROL
14. VIBRATION STRENGTH: EARTHQUAKE,
STRONG, NORMAL, OFF
15. USB CHARGING PORT

Connecting to Power
Connect the included
power adaptor
to the Power Port
located on the
back of the unit and
connect the wall
plug to a working wall
outlet
Designed by iLuv in New York
Power DC 5V
(Back)
Shaker
Shaker
20
POWERING ON
20
5

1. Press and HOLD the D
Time Button for 3 Seconds
or until the clock Display
begins ashing
Default Time is set at 12:00AM
Snooze IDimmer Alarm Time
(Top)
TIME SET UP
Alarm Time
3
Snooze IDimmer Alarm Time
Alarm Time
4
5
2. Press the E “+”or F “-”
to adjust the time
accordingly.
Press and HOLD down the
buttons for faster scrolling.
3
4 5
6

Select Time Format (12/24 hr)
• To select your preferred time
format, use the R Time Format ”
switch located on the back of the
device and ip the switch to 12hr
or 24hr time format.
Designed by iLuv in New York
(Back)
Shaker
Shaker
17
3. When nished, press D
Time Button to conrm and
exit from Time Set-up
Mode.
Snooze IDimmer Alarm Time
(Top)
Alarm Time
3
3
17

Daylights Saving Mode*
To adjust your clock’s time
-1/+1 hr VIA DST, use the
S“Daylight Savings Time”
switch located on the
back of the device to
adjust accordingly.
*Only applicable for areas
that observe DST
(Front)
• When using the 12hr time
format, the PM light will appear
when you are entering PM time.
The indicator will not appear
during the 24hr format.
Designed by iLuv in New York
Shaker
Shaker
18
(Back)
18

The device is equipped with 2 separate alarm
clocks and will need to be set individually. Ensure
your alarms are engaged by checking the
placement of the switch control after alarm setup
is done. (see images)
Alarm setup will only work with AL1 or AL2
Setup is not available on the placement of
AL1+ AL2 or OFF the switch control
Entering ALARM 1 SET-UP Mode
(Left)
1. Adjust the L side switch
to Alarm 1
11
ALARM SET UP
11
9

Snooze IDimmer Alarm Time
(Top)
Alarm Time
2
2. Press and HOLD the C
Alarm button to enter set-up
mode.
(Front)
3. The LED display will blink
if done correctly.
2

5. When the desired time is
set, press the
C Alarm button to
complete the alarm set-up.
Snooze IDimmer Alarm Time
Alarm Time
Snooze IDimmer Alarm Time
Alarm Time
4
5
4. Press the E “+” or F “-”
button to adjust the time.
For faster adjustment, press
and HOLD the E “+” or F
“-” button.
2
45
45
2

(Left)
11
Entering ALARM 2 SET-UP Mode
1. Adjust the L side switch
to Alarm 2
Then repeat steps Alarm 1 Set Up
steps 1 -5 for Alarm 2
11

The alarm source selected
will activate with the
alarm(s).
Setting up the Alarm Source
12
You can change the alarm
alert source by using the
M switch controls located
on the left side of the
device.
• Panic Sound + Vibration
• Vibration
• Panic Sound
12

19
Designed by iLuv in New York
(Back)
Shaker
Shaker
1. Connect the Pillow
Shaker by plugging the
unit into the back of the
device in the T “Shaker”
port.
To include the Pillow
Shaker into your
alarm routine, follow
these steps:
19
Setting up Shaker Alarm

12
2. The Pillow shaker alarm
will activate ONLY on M
Vibration or Panic Sound +
Vibration Alarm settings.
• Panic Sound + Vibration
• Vibration
• Panic Sound (X)
3.Vibration Strength
Setting: Choose the
strength level of vibration
by using the O switch
located on the right side of
the device.
• Earthquake
• Strong
14
Charge
for
Phone
12
14
• Normal
• OFF

You can also add on the Q
Alarm Light to your
scheduled alarm by using the
switch controls located on
the back of the device.
Alarm Light will work with all
three alarm sources.
• Panic Sound + Vibration
• Vibration
• Panic Sound
Designed by iLuv in New York
Shaker
Shaker
16
(Back)
(Front)
Setting up Alarm Light
16

Adjust the volume of the N
Panic Alarm Sound by using
the volume control located
on the right side of the
device.
13
Charge
for
Phone
13
Setting up Panic Volume

Please remember to
activate/de-activate your
alarm accordingly. If your
turn o the alarm, you must
enable it again for the alarm
system to be activated.
To activate/de-activate your
alarm, use the Lswitch
controls located on the left
side of the device
Switch setting
• Activate - AL1 or AL2,
AL1+AL2 for dual alarm
• Deactivate - OFF
(Left)
11
ENABLE/DISABLE ALARM
11
17

• When the alarm is
activated, the following
options are available
• Snoozing your alarm:
Press the B“SNOOZE”
button located on the top
of the device temporarily
snooze your alarm.
The snooze will silence
your alarm in increments
of 9 minutes.
(Top)
Snooze I Dimmer Alarm Time
1
Snooze I Dimmer
SNOOZE
1
18
After 60 minutes, the snooze function will no longer be
available and the alarm will shut o completely until the
next scheduled alarm.

3.Vibration Strength
Setting: Choose the
strength level of vibration
by using the O switch
located on the right side of
the device.
• Earthquake
• Strong
(Left)
Snooze IDimmer Alarm Time
Alarm Time
• Stopping your alarm: To
stop the alarm until the
next scheduled time, press
the C“Alarm”button
located on the top of the
device.
2
2
TURNING OFF THE ALARM
19