Imagilights MIRAI User manual

1
USER MANUAL
COLLECTION: MIRAI
EN
USER MANUAL
Page 2 - 7
NL
HANDLEIDING
Page 7………………..
FR
MODE D’EMPLOI
Page 12……………..
DE
BEDIENUNGSANLEITUNG
Page 17……………
ES
MANUAL DEL USUARIO
Page 22..................
IT
MANUALE D’USO
Page 27...............

2
1. THANK YOU FOR BUYING AN IMAGILIGHTS® LAMP.
Carefully read this manual before using your lamp. Always use your lamp in conformity with the
utilization precautions. Failure to do so will void any warranty. IMAGILIGHTS® disclaims any
responsibility for incorrect use of the product or charger in combination with another product which
could be defective, dangerous or inappropriate.
2. TECHNICAL INFORMATION
LIGHT SOURCE
MIRAI® LED (extreme light output)
NUMBER OF LEDS
36
LED LIFETIME
+50.000 hours
BATTERY TYPE
3.7V Li-Polymer
BATTERY POWER
5800 mAh
ENERGY CONSUMPTION
1.5 Watt
REMOTE
Infrared
MATERIAL
METAL brushed anodized aluminium
OR
METAL polished powder coated aluminium
MATERIAL PLASTIC
PMMA + PC
3. FIRST USAGE PRECAUTIONS
To guarantee the maximum autonomy of your product, please conform to the first usage
precautions:
1. Connect the charger
2. Fully charge your lamp’s battery by placing the lamp on the charger for at least 8 hours.
While the lamp is charging the light indicator on the charger will appear red. A green luminous
indicator indicates the lamp is fully charged.
It is recommended to empty (discharge) the full capacity of the battery before recharging fully. The
internal battery has a charge accumulator and will require 5 or 6 complete charges/discharges before
reaching optimal charge capacity.
Your lamp automatically turns off when placed on its charger plate. This to protect the long life of the
battery and to assure that charging and discharging is not done simultaneously.
In case of damage the charger should be discarded.
4. LIGHT HOURS (APPROXIMATELY)
CHARGING TIME
8,5 hours
HIGH INTENSITY IN WARM WHITE
22 hours
LOW INTENSITY IN WARM WHITE
80 hours
COLOR MIX
45 hours
COLOR FIX
53 hours
CANDLE EFFECT
39 hours

3
5. PRE-PROGRAMMED COLORS
1. Warm white (2700 kelvin)
10. White/Green
19. Medium pink
2. Galactic white
11. Light green
20. Dark pink
3. Candle mode yellow
12. Dark green
21. Salmon
4. Candle mode orange
13. Turquoise
22. Light purple
5. Dark red
14. Blue/Turquoise
23. Dark purple
6. Light red
15. Blue/Green
24. Pink/Purple
7. Light orange
16. Purple/Blue
25. 2300 kelvin warm white
(only with remote)
8. Dark orange
17. Dark blue
9. Yellow
18. Light pink
6. LIGHT SOURCE (place the led on the charger)
Battery Indicator (push the button on the back of the led)
4 green leds = 100% - 75%
3 green leds = 74% - 50%
2 green leds = 49% - 25%
1 green led = 24% - 5%
1 red led = 4% - 0%
Press color up for + 2sec. to switch your lamp ON or OFF
The led starts with warm white 2700 kelvin, press again and the led will show warmer white 2300
kelvin.

4
7. INFRA-RED REMOTE CONTROL
Opgelet dit is de OUDE afstandsbediening,
deze dient vervangen worden door een met 10
knoppen
COLOR UP & DOWN: Choose between one of our 24 pre-programmed colors.
RGB + WHITE: Start the 160.000 color mix mode 1 or 2 which will take approximately 14 minutes
(=ultra-slow), and will continue without interruption. To fix a color, press the same button again. To
continue the cycle, press this same button again. The difference between both is that RGB + WHITE
will show colors and end with warm white and the RGB will only show colors.
BRIGHTNESS: Shift through 4 different light intensity modes.
CANDLE MODE: Choose candle light mode 1 (yellow) or 2 (orange).
COLOR LOCK: Press this button multiple times while aiming at your lamps to disable the pushbuttons
functions on the bottom of the lamps. To cancel the color lock function turn off your lamp with the
remote or place it back on the charger.
WARM WHITE 2300K: this function will enable warmer white 2300 kelvin
The remote operates on one Lithium battery CR2025 3V

5
8. CHARGING POSSIBILITIES
The INDIVIDUAL DIRECT MINI CHARGER
charges one single lamp and operates with the
following adapter: Input 100-240V AC ~ 50/60
Hz - Output DC 6V 1A
The DIRECT MULTI CHARGER plate charges up to
8 lamps simultaneously. These can be stacked on
top of each other. The DIRECT MULTI CHARGER
operates with the following adapter: Input 100-
240V AC ~ 50/60 Hz - Output DC 9V 5A
Your lamp automatically turns off when placed on its charger plate. This to protect the long life of the
battery and to assure that charging and discharging is not done simultaneously. While the lamp is
charging the indicator on the charger will appear red. A green luminous indicator indicates the lamp
is fully charged.
Charger plates are not standard included when purchasing a table lamp.
Lamp is useless without its specific prescribed IMAGILIGHTS® charger.
9. REPLACING SPARE PARTS
Every part of the MIRAI® lamp can be replaced when necessary. Please contact us at
[e-mail] for more information.

6
PACKAGE CONTENT
Composition of the table lamp: metal plate,
pole and led module
Composition of the standing lamp: metal plate,
pole and led module
Composition of the sticks lamp: metal poles
and led module
Composition of the tree lamp: metal plate, 3 poles
with extensions, 3 led modules
Each set is packed with all its parts required
TROUBLESHOOTING
If your lamp falls and the top metal part of the head detaches; glue the head back on.
CLEANING YOUR LAMP
It is recommended to clean your lamp with a soft humid cloth. Do not use any aggressive liquids or
materials.

7
CAUTION
•MIRAI® lamps are mainly intended for indoor use, however can be used outdoors (IP52
certified: rain & dust proof)
•The device must be charged in an anhydrous place.
•Do not use the charger and lamp near a heat source or expose to fire.
•Do not try to open or dismount the lamp or charger to avoid any risk of electrical shock or
altering its waterproofing. Failure to comply will cancel your warranty.
•Do not connect the lamp to any other device.
•Do not try to charge the lamp with a charger other than the one supplied in your pack.
•Do not try to replace the battery with a battery other than the battery inserted.
•Keep charger and lamp out of reach of young children.
•Do not store the lamp and charger in a humid area or outdoors.
•When storing your lamp, put it in its original box to avoid any damages or scratches.
RECYCLING
Do not throw this lamp away with your regular household garbage. Contact the appropriate service
within your community to learn the best way to dispose of the device. Electrical products contain
substances harmful to human health and the environment so must be adequately recycled. The
battery must be safely removed before discarding the device.
LEGAL INFORMATION AND WARRANTY
IMAGILIGHTS® wireless lamps are covered by design registration, copyright and patent pending. All
rights reserved. All shapes and models are registered. Patented LED module and patented charging
possibilities. Any tampering with or repairing the unit voids the warranty. The unit is equipped with
special labels to avoid tampering.
Manufacturer’s warranty: 2 years.
COMPANY DATA
IMAGILIGHTS BVBA
Nijverheidslaan 65C
B-8540 Deerlijk
BELGIUM
TEL: [phone]
Email: [e-mail]
Website: www.imagilights.com