IMENE T4 User manual
User manual
T4
Supreme beauty own the world
MYA TECHNOLOGY CO., LTD
CALIFORNIA 1616 16TH AVE SAN FRANCISCO CALIFORNIA 94118
www.imene.net
The IMENE T4 painless ipl hair removal system gives you perfect
permanent hair removal results at home, instead of temporary solutions
such as shaving and waxing. The IMENE T4 painless ipl hair removal
system works in the same way as professional laser hair removal. The
hair removal system treats the hair follicle, not just the hair, giving your
permanent hair reduction after a series of treatments.
LET'S GET STARTED!
CONGRATULATIONS ON YOUR IMENE T4 PAINLESS
IPL HAIR REMOVAL SYSTEM
Table of contents
INTRODUCTION
PRODUCT DESCRIPTION
WHO CAN USE THIS DEVICE
HOW TO USE THIS DEVICE
TROUBLE SHOOTING
WARRANTY
WARRANTY CARD
TREATMENT SCHEDULE
01
02
04
07
14
16
18
20
2. PRODUCT DESCRIPTION
The IMENE hair removal system deactivates the follicles that produce hair. It
emits a pulse of ipl light, which heats up the dark pigment inside the hair and
deactivates the hair follicle. That's why it can deliver permanent results and
works only on naturally brown or black hair.
Each hair follicle must be treated during its active growth period to get
optimum results. Hair grows in cycles, so multiple treatments are necessary.
For best results, take treatment from the first week to 3 months or until you
are satisfied with the amount of hair reduction.
2.1 Instrument structure: (Figure 1)
DC input
Operation button
Ice button
LCD
Power / energy choosing button
Replaceable
lamp
（Figure 1）
Status Indicator
01 02
1. INTRODUCTION
The IMENE hair removal system deactivates the follicles that produce hair. It
emits a pulse of ipl light, which heats up the dark pigment inside the hair and
deactivates the hair follicle. That's why it can deliver permanent results and
works only on naturally brown or black hair.
Each hair follicle must be treated during its active growth period to get
optimum results. Hair grows in cycles, so multiple treatments are necessary.
For best results, take treatment from the first week to 3 months or until you
are satisfied with the amount of hair reduction.
Permanent hair removal
painless and less risk
Unlike traditional IPL and laser hair removal device which may cause skin
burn during the treatment, IMENE T4 hair removal system combines ice
therapy with ipl technology. This technology will calm down our skin during
the treatment, and you will have less risks of redness skin.
3. WHO CAN USE THIS DEVICE?
Skin and hair color comparison table
NoticeableApplicable
White Ivory tint Beige
Dark brown
and black
Light brown
Brow
×
×
×
×
××× ×× ×
××× ×× ×
××× ×× ×
Black
Dark brown
Brown
Golden
Red
White
Gray
Hair
color
Skin
color
Not applicable
×
Applicable: It can work perfectly for your skin and hair type
Noticeable: If your skin is brown, you should be careful in using this
device. Please start with a low energy level and check your skin condition
after the test. Some sensitive skin may turn red or a little burn, it is
normal. We advise you to use aloe gel for repairing skin after the
treatment.
Not applicable: Avoid using this device.
Input Power: 48W
Voltage Rating: 100V-240V
Rated Frequency Range: 50Hz/60Hz
Energy level: 5 Levels
IPL Output Wave: 530-1100 nm
Output energy: Level 1-5 (4.5J/4.0J/3.4J/2.8J/2.2J)/cm²
Treatment Window Size: 3.6cm²/2.0cm²
Size: 156.5mm(L)×58mm(W)×208.5mm(H)or 6.16*2.28*8.21(in)
Host Weight: 0.83 oz
Storage Temperature: 0°C-45°C
Working Temperature: 5°C-35°C
2.2 Specifications
IMENE T4 Host x1; Small area treatment cap x1; Goggles x1; Power Cord x1
2.3 Package List:
03 04
（Figure 2）
Ice compress area
No ice compress
（Figure 3）
Noticeable: Please have skin sensitive test on treatment area, before
treatment otherwise you may have the risk in burning skin.
3.1 Contraindications
Do not use if you are under the age of 16. The effects of using the system in
this age group are unknown.
Do not use if the skin, in the area you want to treat, is tanned or burned. Use
of the device on tanned or burned skin may result in temporary or even
permanent whitening ordarkening fo the skin.
Do not use if you are pregnant, trying to become pregnant (conceiving) or
breast-feeding. Hormonal changes occur during pregnancy or breast-feeding
and could increase the risk of skin injury or skin sensitivity.
Do not use if you have epilepsy or light-induced seizures or migraines. The
energy flashes might cause severe headaches and migraines.
Do not use on tattoos, dark brown or black spots ( such as dark freckles,
birthmarks, moles or warts). Tattoos or dark spots may absorb too much light
energy which could cause skin swelling, temporary or permanent blisters or
discoloration of the skin or whitening of the skin.
Do not use on the head, ears, necks, nipples, genitalia, or around the anus.
Use in these areas could cause skin swelling, blisters, or temporary skin
discoloration or whitening of the skin.
Do not use if you have any active skin condition in the treatment area,
including acne, sores, psoriasis, eczema, burns, herpes simplex, wounds or
a rash. These conditions can make the skin more sensitive to the light
treatment and could make the treatment uncomfortable or cause skin
swelling, blisters or infection. If your skin conditions has healed enough to
use the device, then please consult with your doctor.
Do not use the device if you have a history of kelodial scar formation, a
known sensitivity to light (photosensitivity) or are taking medication that
makes the skin more sensitive to light, including non-steroidal anti-
inflammatory agents, (e.g.,aspirins, ibuprofens, cetaminophen),
tetracyclines, phenothiazines, thiazide, diuretics, sulfonyluraes,
sulfonamides, DTIC, fluorouracil, vinblastine, griseofulvin, Alpha-Hydroxi
Acids(AHAS), Beta-Hydroxi Acids(BHAS),
Retin-A, Accutane and/or topical retinoids.
Do not use if you have a disease related to photosensitivity, such as
porphyria, polymorphic light eruption, solar urticaria, lupus, etc. These
conditions make the skin more sensitive to the light treatment and could
make the treatment uncomfortable or cause skin swelling, blisters or
infection.
05 06
4. HOW TO USE THIS DEVICE?
1.Please check the skin and hair color chart (Page 4 Picture 3) and check
who can use this device (Page 4) to see whether the intended skin area can
be treated with this device. If your skin color is at a critical value, please use it
under professional guidance or contact us.
2.Shave and clean the treatment area. After your skin is cleaned, then follow
the next step. If your skin is experiencing sensitivity (redness), you cannot
use this device. Don't wax or pluck hair.(If you wax on treatment skin, please
wait for at least 72 hours.)
3.Plug in and connect the host with power and wear glasses (This device
must be connected with power during use). Long press the power button
(Page 2 picture 1) for 3 seconds to start it.
4.Conduct skin sensitivity test and choose proper energy level on your
treatment area.
4.1 Before The Treatment
07 08
4.1.If you are using the system for the first time or on a new area, choose a
small area close to the intended area to perform a skin sensitivity test. Start
at level 1{short press the power button to adjust the level} Follow the
treatment instructions below but make sure to emit only 2-3 pulses. After the
skin test, wait 60 minutes and check your skin for any reaction. If the skin
appears normal and there is no redness or other skin reaction in 60 minutes,
then you are ready to perform a full treatment.
4.2.Choose suitable energy level according to your skin tolerance and
increase energy level from one to five gradually. If there is no abnormal
reaction, you could increase energy level gradually. Don't hold the laser
window still over one spot and flash multiple pulses on the skin. It may cause
too much heat and may result in skin swelling, blisters, or temporary or
permanent changes in the color of your skin. After each flash, move
treatment window slowly to adjacent skin area.
4.3.Press the operation button for 3s can start automatic flash function. Once
automatic flash function start, the level icon will flash. If you want to use
manual flash function, just need to press the operation button.
Before returning to a previously treated skin spot, wait for at least 3 minutes.
Each time you press the treatment level button, the level will increase. Once
the device is at maximum level, you can press the treatment level button
again to downgrade levels.
Step 6: Keep going until you have completely covered the area you want to treat.
And repeat 2-3 times per session (If your skin is very sensitive, please reduce
treatment frequency per session accordingly.)
DO NOT treat repeatedly in the same spot within 3 minutes. Always move the
treatment window to a new area after each laser pulse. Otherwise it may result in
discomfort or skin heating, which would cause skin injury.
Step 7: After finishing treatment, press the ice button can help cooling skin or use
some moisture gel (Package does not include the gel) in 15 minutes, you can also
choose pressing ice button when you are removing hair.
NOTE: Compared results with two method in using IMENE T4 device
Using the ice function during the IPL laser treatments
Advantage: Painless
Disadvantage: slow results.
Using the ice function after finish the IPL treatments
Advantage: more effective.
Disadvantage: you may feel discomfort
Step 8: Power off and disconnect adapter, use wet cloth or cotton pads to clean
the lamp treatment window. Put the device and accessories into the package and
store it in safety place.
09 10
4.2 How To Treat:
Step 1: Clean Skin, shave the hair where need to be treated.(You must wait for
your skin calming down and there is no redness then you will be able to start)
Step 2: Clean the lamp window, connect to power supply.
Step 3: Press the power button 2s to power on the device, choose suitable energy
level, from low level to higher level.
Step 4: Wear the goggles to avoid IPL light stimulate eyes.
Step 5: Let the treatment window touch treated area vertically (The indicator will
turn continuous green), Flash and move the lamp port position on each turn, Don't
overlap and miss any area, Run through all the hair removal areas in sequence.
90°
（Figure 4）
×
See the table below as a guide to know how many pulses per treatment you may need
to cover each area. These pulse counts and times are approximations–your actual
treatment area and number of pulses may vary. Always follow the treatment
instructions and warnings provided in this booklet.
NOTE: When treating larger areas like legs and back, you may need more than
200 pulses to cover the area.
Instrument operation procedure picture:
1.Clean skin, Shave the hair. 2.Clean the treatment
window,and connect the
device to power supply.
3.Long press the power
button to power on and
choose energy level.
4.Wear the protect goggles. 5. Let the treatment window
touch treated area vertically
and start operation.
6.Use moisture gel 15
minutes apart.
PULSE COUNT GUIDE
For thick hair.
For first 4 treatments do one treatment every week;
For following 5-9 treatments, do one treatment every 2 weeks;
In the maintenance period, do one treatment every month for area with hair regrowth.
For thin hair.
For first 1-4 treatment do one treatment every 2 weeks and then use this device accordingly.
4.3 Treatments And Sessions:
Body Part Approximate # of
Pulses Per Treatment Approximate Minutes
Underams
Bikini
Upper Lip
Upper Leg
Lower Leg
35 perside
70 perside
10
200 perside
200 perside
2-3 perside
2-3 perside
2-3 perside
5-6 perside
5-6 perside
11 12
WHILE USING THIS PRODUCT
The sensation varies, depending on individuals, treatment area and treatment
level. Some users may feel like a rubber band snapping against the skin. Others
may feel a warm and prickling sensation.
As the amount of hair in the treated areas decreases, the sensation will also
decrease. For this reason, you may be able to use a higher treatment level after
your initial treatments.
Some users experience mild redness that goes away within 24 hours.
DURING YOUR FIRST 3 MONTH OF TREATMENT
After your first treatment, there will be no visible change to the hair. Laser hair
removal does not cause immediate hair loss.
With additional treatments, there will be gradual hair loss with each treatment.
The hair that does regrow will also begin to lighten and become finer.
AFTER 3 MONTHS OF TREATMENT
Hair follicles that have been deactivated by the IMENE device will not grow back.
Do occasional touch-ups or additional treatments if necessary.
4.4 WHAT TO EXPECT? 5. TROUBLE SHOOTING
YOUR QUESTION
My IMENE T4 device
won't turn on
(The indicator did not flash)
IT'S POSSIBLE THAT HOW TO TROUBLE SHOOT
You do not connect
the device with a power
The power cord is defective
The device is defective
Check if the power cord
connected well with the
host and power
Please contact after-sale@
imene.net for replacement
My IMENE T4 device
won't turn on
(The indicator flashes)
The power button is defective
You do not press
the power button
Long press the power
button for two seconds
The device lcd screen
shows error The built-in system error Please contact after-sale@
imene.net for replacement
It doesn't emit light
Your skin color and hair color
do not fit this device
Contact info@imene.net
for professional guidance
The device does not verify
your skin
The treatment window is dirty
Please check page 4 picture
3 to see more details
Please clean the treatment
window before the treatment
13 14
My skin is burnt
by the device.
Your skin color is too dark
or your hair color is too light
The energy level you chose
is too high
You had treatments on the
same area within 3 minutes
Please check the skin and hair
color chart in page 4 picture 3
Please have skin sensitive test and
adjust energy level accordingly
Please check more details about
how to use this product in page 7
Please apply Aloe vera repairing
gel on the burn area and ask
professional dermatologist for help
My skin reflect redness
after the treatment It is normal
Slightly redness is normal in IPL
treatment, you can also apply the
aloe vera repairing gel after
the treatment
The device makes
loud noise The fan is in working condition
It is normal
The ice function
does not work well
The time you use this product
is too long
Please turn off the device and wait
for 10 minutes and then start again
I have followed the
instructions, but I don't
see visible results.
The energy level you choose
is too low
Your hair follicle cells are
more stubborn and require
more treatment.
Using this product too
aggressively will result
in the opposite result
Please reduce treatment cycle
accordingly. If you are using this
device once a week, then please
reduce to every two weeks or
more time
Please take more treatments
Please take more treatments
IF YOU HAVE ANY OTHER ISSUES, PLEASE CONTACT THE SELLER FOR HELP.
6. WARRANTY
6.1.Warranty Period:
Quality warranty : From the date of purchasing , the whole warranty period is 1 year. We
will exchange a brand new product or fix the product for freely.
90 days money back warranty: From the data you received this product, the whole money
back service period is 3 month. If you are not satisfied with this product or you do not
number, we will issue full refund for you.
6.2.Warranty Division Of Responsibilities:
If the instrument has quality problems during the warranty period , making detection of non
human factors, it is free warranty ; if it is cause for abnormal use or due to other irresistible
factors , it is not covered under warranty.
6.3.Warranty Specifications:
When users request a free service during the warranty period , you need some purchased
document ( such as: Invoice or warranty card , etc. ). If you return the instrument because
of their improper packing, then damaged during the transportation , so it is not free
warranty or replacement. If they are following matter :our company will not be responsible
for it , and it is not covered under warranty:
a.For fires, earthquakes, acts of third parties, and customer's negligence or intentional
misuse, or using under abnormal conditions, unpredictable events such as failure and
damage caused.
b.For the role of the goods produced or incidental damages ( loss of business interests ,
business interruption , loss of use of the apparatus including the replacement of any
equipment, device, or service cost arising from , or customer claims )
15 16
c.For the application to use the content of this RF manual other than arising from the damage.
d.Beyond the control of our company; using the other brand accessories, accessory or
replacement goods, if a problem occurs, service and parts needed to solve theproblem; and
acceptance of unauthorized the right to modify or service problems with the services required;
misuse, abuse, not in accordance with the company description indicates operation,
maintenance or dismantling illegal instrument.
e.Failure or damage resulting due to use in specified non-product work environment, including
beyond the workload.
f.Because users' improper storage (such as rodents, penetration of liquids, etc.).
Warranty Card
Purchase Channel
Order Number
Purchase Date
Buyer Name
Email
Address
Tel
Store Online
17 18
TREATMENT SCHEDULE
See this helpful schedule to keep track of your IMENE T4 device treatment. Use the Pulse
Count Guide to see how many pulses per treatment you may need to cover each area.
Date Body Area Number of Pulses
19 20
Table of contents
