impact VE-TTLCH User manual

VE-TTLCH
Quick Charger for Venture
VE-TTLBAT Lithium-ion battery
INSTRUCTIONS

Precautions ⚠⚡
This quick charger is for the Venture
VE-TTLBAT lithium-ion battery.
Charging will reach 100% in about
3.2 hours. The charger will operate
on any voltage between 100 and
240 V, 50/60 Hz. A plug adapter will be
necessary anywhere outside the US.
• Use the charger only with the
designated Impact Venture
rechargeable battery.
• Recharge the battery before each
use to ensure full charge.
• There are no user-serviceable
parts inside the unit. Only
qualied service engineers
should access the inside of the
charger.
• This charger is for indoor use
only. Do not expose it to rain or
snow.
• Recharge at room temperature.
Do not place the charger near a
radiator, heater, or similar heat
source when charging.
• Do not allow moisture or liquids to
come in contact with the battery,
charger, or cables.
• Images are for illustrative
purposes only.

1. Connect the AC power cord 1
to the quick charger, and plug it
into a wall outlet. The LED 2will
turn green to indicate that it is
receiving power.
2. Connect the DC battery charge
cable 3to the VE-TTLBAT
battery. The LED 2will turn
red to indicate that the battery
is charging. Charge time is
approximately 3.2 hours.
3. When the battery is fully charged,
the LED 2will turn green.
Disconnect the battery and install
it in your Venture TTL monolight.
Instructions
1
2
3

One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a
period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal
use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with
specic legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and
return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group. © 2016 Gradus Group LLC. All Rights Reserved. GG1