impact PFSK-1824 User manual

PFSK-1824/2436
PortaFrame
Scrim Kit
INSTRUCTIONS

2
Introduction
Thank you for choosing Impact.
The Impact PortaFrame Scrim Kit is a exible way to shape
and modify your continuous or strobe light source. Set up the
foldable system in minutes, attaching it to standard 3/8-inch grip
heads. Fabric scrims block, diffuse, or reduce the light, and give
you creative control over the look of your shots. The scrim kit is
compatible with other equipment available from Impact Studio
Lighting. For more information, refer to the Recommended
Products and Accessories section of this pamphlet.

3
Precautions ⚠
• The Impact PortaFrame Scrim Kit
is designed for use in controlled
environments. Bad weather and
strong winds can be dangerous
to the personnel and equipment.
We cannot be held responsible for
damage caused by misuse.
• Handle this product with care.
• Keep this product away from
children.
• Use only parts provided by the
manufacturer.
• Make sure everything is secure
before proceeding.
• Make sure the items are intact
and that there are no missing
parts.
• All images are for illustrative
purposes only.

4
Overview
1. Folding locking frames
2. Setting pin
3. Pin notch
4. 3/8 in. mounting pin
5. Single net (green)
6. Double net (red)
7. 1-stop silk (gray)
8. 2-stop silk (yellow)
9. Light blocker (black)
10. Frame sleeve
11. Touch-fastener wrap
12. Light-blocker nger
13. Single-net nger
14. Light-blocker dot
15. Single-net dot
16. Carrying case
1
2
3
4

5
11
10
9
16
14
15
8
7
6
513
12

6
Setup
1. Insert the folded frame’s 3/8-inch mounting pin into
a standard grip head, and secure in place.
2. Raise one side of the frame, and seat the setting pin
into the pin notch. Repeat for the opposite side.
3. Slip the scrim’s sleeve openings over the sides of
the frame.
4. Secure the scrim to the frame with the touch-
fastener wrap.

7
Recommended Products
• Impact KCP-200 Grip Head
• Impact KCP-200B Grip Head, Black
• Impact KCP-240 40 in. Grip Arm
• Impact KCP-240B 40 in. Grip Arm, Black
• Impact LSP-K10 Pro Light Stand
• Impact LS-CT40MK Turtle Base C-Stand Kit – 10.75 in. (chrome)
• Impact LS-CT40MBK Turtle Base C-Stand Kit – 10.75 in. (black)
Recommended Accessories
• Impact CC-106R Super Clamp with Ratchet Handle
• Impact SRP-118 Heavy-Duty Swivel Pin
• Impact ME-106 6 in. End Jaw Vise Grip
• Impact SBF-B-15 Saddle Sandbag, 15 lb., Black
• Impact GT10-212B Gaffer Tape, Black, 2 in. × 12 yd.
Frames and scrims (H × W) PFSK-1824: 18 × 24 in. (45.7 × 60.9 cm)
PFSK-2436: 24 × 36 in. (60.9 × 91.4 cm)
Dots 6 in. (15.2 cm) diameter
Fingers 4 × 14 in. (10.2 × 35.6 cm)
Case (L × H × D) PFSK-1824: 33.4 × 9.8 × 3 in. (85 × 25 × 7.6 cm)
PFSK-2436: 44 × 11 x 3 in. (111.8 × 27.9 × 7.6 cm)
Mounting Pin Frame: 3/8 in. (9.5 mm)
Dots and ngers: Max 0.3 in. (7.6 mm)
Min 0.2 in. (5.1 mm)
Weight PFSK-1824: 11 lb. (4.9 kg)
PFSK-2436: 12.85 lb. (5.8 kg)
Specications

One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials
and workmanship under normal consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be limited solely to repair
or replacement, at the provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specic legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product to
Impact along with the RMA number and proof of purchase. Shipment of the defective product
is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
GG2