Impecca Hsb100 User manual

Bluetooth Wireless Stereo Headset

Casque stéréo Bluetooth sans ﬁl / Audífonos Estéreo Inalámbricos Bluetooth

User’s Guide

Manual del Usuario / Manuel de l’ulisateur

Model: HSB100

- 1 -

TABLE OF CONTENTS

ENGLISH

Table of Contents.......................................................................................................................01

Welcome / Main Features .........................................................................................................02

In The Box / Layout of Controls .................................................................................................03

Basic Operation / Charging the Battery.....................................................................................04

Power On and Off / Pairing the device ......................................................................................05

Using the Headset......................................................................................................................06

Troubleshooting.........................................................................................................................07

Technical Specifications ............................................................................................................08

FRANÇAIS

Table des Matières.....................................................................................................................09

Bienvenue / Fonctions Principales.............................................................................................10

Dans La Boite / Mise A Disposition Et Commandes...................................................................11

Fonctionnement De Base / Rechargement De La Batterie........................................................12

Sous Tension/Hors Tension / Couplage Avec Dispositifs...........................................................13

Utilisation Du Casque.................................................................................................................14

Depannage .................................................................................................................................15

Cahier De Charges......................................................................................................................16

ESPAÑOL

Tabla De Contenido....................................................................................................................17

Bienvenida / Características Principales ....................................................................................18

En La Caja / Disposición Y Controles..........................................................................................19

Funcionamiento Básico / Cargando La Bateria..........................................................................20

Encendido/Apagado...................................................................................................................21

Usando Los Audífonos ...............................................................................................................22

Solución de problemas...............................................................................................................23

Especificaciones Técnicas ..........................................................................................................24

- 2 -

WELCOME

Congratulations on your purchase of the IMPECCA HSB100 Bluetooth Wireless Stereo Headset. Now you can

enjoy superb quality music streamed wirelessly from your Bluetooth compatible music player and make and

receive hands-free calls using your mobile phone without having to switch devices. The music player can be

the music player feature of your mobile phone or a separate compatible device that supports Bluetooth

wireless technology.

The IMPECCA Bluetooth Wireless Stereo Headset features DSP (Digital Signal Processing) technology with

noise reduction and echo cancellation and has been designed for comfort, featuring soft ear cushions,

adjustable headband, and lightweight design. Powered by a highly efficient lithium-ion battery capable of

providing up to 15 hours working time and 360 hours stand-by time, the IMPECCA Bluetooth Wireless Stereo

Headset is perfect for business and daily use.

The headset is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: Headset

Profile (HFP), Advanced Audio Distribution Profile (A2DP), and Audio Video Remote Control Profile (AVRP)

Check with the manufacturers of other devices to determine their compatibility with this device

Before using your headset, it is recommended that you familiarize yourself with the features, functions, and

operating procedures described in this manual. Due to slight modifications in production, the instructions,

features, and/or descriptions found in this manual might be slightly different from your product.

MAIN FEATURES

Noise reduction / Echo cancellation function

High Quality DSP sound

Effective transmission range of 10 meters

Comfortable lightweight adjustable headband

Wind noise suppression

High Density Li-Polymer Battery for long lasting performance

- 3 -

IN THE BOX

1. User’s Guide

2. Bluetooth Wireless Stereo Headset

3. 1 Meter Mini USB cable

LAYOUT AND CONTROLS

A –Volume Up/Down

B –Blue LED (Power and/or Pairing indicator light)

C –Red LED (Battery Charge and/or Low Battery indicator)

D –Omni-directional microphone

E –Multifunctional Button (Answer call/ End call, Play/Pause, Power on/off, Pairing) ***

F –Mini USB Jack

G –Adjustable headband

***

REFER TO THE MULTIFUNCTION BUTTON CHART ON PAGE 7

***

- 4 -

BASIC OPERATION

Follow these tips and safety instructions to preserve the operational lifespan of your Bluetooth Wireless

Stereo Headset:

Do not use this player in extreme temperatures. Keep away from extreme hot, cold, dry, or damp

areas. Also keep away from water, fire, and radiation.

It is recommended that you allow the battery to fully charge before using the device for the first time

(approximately 2 to 3 hours. Do not recharge unattended for longer than 5 hours.

The effective range for this wireless device is 10 Meters. Performance may be affected by distance and

interference from other devices or conditions within the operating environment.

Barriers and other wireless devices may affect the performance of headset.

Check the laws and regulations on the use of mobile phones and hands-free equipment in areas you

intend to use this product.

Permanent hearing damage or hearing loss may occur if earphones are used at a high volume. Hearing

experts advise against continuously listening to music at a high volume. If you hear a “hissing” noise in

your ears, or if you experience discomfort, lower the volume, or temporarily discontinue use of this

product until discomfort subsides.

Do not disassemble your Bluetooth Wireless Stereo Headset.

Do not allow young children to use your player unsupervised.

Observe all signs and instructions that require an electrical device or radio product to be switched off

in designated areas, such as petrol/refueling stations, hospitals, blasting areas, potentially explosive

atmospheres or aircraft.

Do not use or connect adaptors and/or chargers to this product that are not approved of or specified

by IMPECCA™.

CHARGING THE BATTERY

The Red LED will continually flash when battery power is low. When the battery is completely drained, no

indicator lights will function. Before using, allow the battery to charge for at least 2 to 3 hours.

1. Connect the mini USB cable to the USB Jack on your headset (as shown).

2. Connect the larger end of the USB cable to a USB port on your PC or

Laptop.

3. The Red LED will stop flashing and will remain solid red.

4. When charging has finished, the Red LED will turn off.

- 5 -

POWER ON/POWER OFF

Power On/Off

To switch the device on, press and hold the multifunction button for about 5

seconds and then release.

Note: If the Bluetooth Wireless Stereo Headset has already been paired or

connected to another Bluetooth device before, the Blue LED light will slowly

flash as the headset automatically attempts to reconnect to the paired device.

If the headset is unable to locate a formerly paired device within 3 minutes, it

will shut down automatically.

To turn the power off, press and hold the multifunction button for about 5 seconds and then release. The

Red LED light will flash and then turn off.

When the headset is connected to a paired device and is ready for use, the indicator light slowly flashes

blue. If the headset has not been paired with a device, it automatically enters the pairing mode

If you connect the headset to a device but do not use it for a while, switch off the headset to save power.

PAIRING HEADSET WITH BLUETOOTH-ENABLED DEVICES

Pair and connect the headset with a mobile phone that has a music player feature

If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the

phone to make and receive calls and to play music with the headset.

1. Ensure that your phone is switched on.

2. If the headset has not been previously paired with a device, press and hold the multifunction

button for about 8 seconds until the Blue LED light flashes rapidly, indicating that the device is

in ‘pairing’ mode.

Note: If the headset has been previously paired with another device, switch off the headset

and press and hold the multifunction key for 5 seconds until the indicator light starts to flash

blue quickly.

3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See

the user guide of your phone for instructions.

4. Select the headset from the list of found devices. It should show up as “HSB100”.

5. Enter the passcode “ 0000 “ to pair and connect the headset to your phone. In some phones,

you may need to make the connection separately after pairing. You only need to pair the

headset with your phone once.

If pairing is successful, the headset appears in the menu of the mobile phone where you can view the

currently paired Bluetooth devices. When the headset is connected with your mobile phone and ready

for use, the indicator light of the headset slowly flashes blue.

- 6 -

Pair and connect the headset with a music player

If your phone does not support the A2DP Bluetooth profile, you can separately pair the headset with

the phone and a music player that supports this Bluetooth profile.

If you have paired and connected the headset with your phone, disconnect the headset from it before

pairing the headset with a music player. To pair the headset with a music player, follow the instructions

in the section above. If your music player does not have a keypad, it may use the Bluetooth passcode

“0000 ”by default. Refer to the user’s guide of your music player for further instruction.

Disconnect the headset

To disconnect the headset from your device, switch off the headset, or disconnect it in the Bluetooth

menu of your device. You do not need to delete pairing with the headset to disconnect it.

Reconnect the headset

To connect the headset to the phone or music player that you have last used with it, switch on the

headset, or make the connection in the Bluetooth menu of your device. In your device, you may be able

to allow the headset to connect to it automatically whenever the headset is switched on. For further

instructions, refer to your device’s user’s guide.

USING THE HEADSET

Place the headset over your ears so that the pad indicated with L is on the left ear and the pad with R is on

the right ear. Adjust the length of the headband until the speaker pads rest comfortably on your ears.

Warning: When using the headset your ability to hear external sounds may be affected.

Do not use the headset in areas where your safety is in danger.

Adjust the volume

To adjust the headset volume, press the volume up button to increase or the volume down button to

decrease the volume during a call or while listening to music.

Call handling

To make a call, while connected to the headset, use your mobile phone and dial as you normally

would.

To answer a call, press the multifunction button or use the keys on the phone.

To reject the call, press and hold the multifunction button for about 5 seconds.

To end a call, press the multifunction button or use the keys on the phone.

Listen to music

To listen to music, connect the headset to a compatible music player such as a mobile phone with a

music player feature or other music device and then press the multifunction button. The music player

must support the A2DP Bluetooth profile. The music functions available depend on your music player.

Note: If you receive or make a call while listening to music, the music is paused until you end the call.

To pause or resume playing, press the multifunction button. To stop playing music, press and hold the

multifunction button for about 2 seconds.

- 7 -

MULTIFUNCTION BUTTON CHART

Function

Button

Operation

Turn on

Multifunction Button

Press and hold ( Approximately 5 seconds)

Pair

Multifunction Button

Press and hold ( Approximately 8 seconds)

Turn off

Multifunction Button

Press and hold ( Approximately 5 seconds)

Answer Call

Multifunction Button

Quick Press

End Call

Multifunction Button

Quick Press

Refuse Call

Multifunction Button

Press and hold (Approximately 5 seconds)

Play (Music Mode)

Multifunction Button

Quick Press

Pause (Music Mode)

Multifunction Button

Quick Press

TROUBLESHOOTING

See below for solutions to common problems.

Symptom

Solution

LEDs do not function

Power button is not turned on. The battery is out of power.

Connection failure

Verify that the Bluetooth function of smart phone or other devices is

turned on.

Don’t turn on too many headset and Bluetooth devices at the same

time when connecting. Please turn off other headsets and Bluetooth

devices in order to avoid interference.

Failed to pair successfully within 3 minutes. Please repeat the pairing

procedure.

Make sure the blue LED is flashing quickly (pairing mode)

Make sure the input password is correct (if required).

Sound is distorted

Check to see if the red LED is flashing (the battery is in low voltage).

Please charge the battery immediately

Check the volume and decrease the volume, if necessary. Be sure

that the Bluetooth device is within range. Move closer to the device

and see if sound quality improves.

If you experience any issues that are not listed above, or if you are unable to resolve your issue after trying the

methods and solutions described above, please contact our technical support team:

Email: [email protected]

Visit our website: http://www.impeccausa.com

- 8 -

SPECIFICATIONS

HEADSET

RF Transmit Power

9dBm

RF receive sensitivity

-85dBm

Working current

25mA

Signal-to-noise ratio

≥83dB

Frequency Response

10m, 360°

Bluetooth receiving range

40Hz - 20kHz

Drivers

30mm x 2 neodymium drivers

Headset dimensions(W x D x H):

157.8 x 52.5 x 169.8 mm

MICROPHONE

Omni - Directional Microphone

Ф6mm

BATTERY

Operating current/voltage:

25 mA @ 3.7v

Li-ion battery capacity:

320 mAh

Battery life:

15 hrs. (continuous operation)

Charge time:

Approx. 3 hrs. from empty to full capacity

All trademarks are the property of their respective owners.

Used by LT Inc. solely for descriptive purposes.

To obtain a warranty, please register your product online at: www.impeccausa.com

- 9 -

TABLE DES MATIÈRES